kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #60352
[Bug 1318771] Re: x230t dock station usb devices stopped working after resume from suspend
Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v3.15 kernel[0].
If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.
If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.
If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'.
Once testing of the upstream kernel is complete, please mark this bug as "Confirmed".
Thanks in advance.
[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.15-rc5-utopic/
** Changed in: linux (Ubuntu)
Importance: Undecided => Medium
** Changed in: linux (Ubuntu)
Status: Confirmed => Incomplete
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1318771
Title:
x230t dock station usb devices stopped working after resume from
suspend
Status in “linux” package in Ubuntu:
Incomplete
Bug description:
This seems to be very common on this particular kernel. There was not
a problem before
there are some errors in bus
[49466.198717] usb 3-3.4.1: Busted HC? Not enough HCD resources for old configuration.
[49466.270037] usb 3-3.4.3.3: reset high-speed USB device number 15 using xhci_hcd
[49466.326339] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801a24b8c80
[49466.326341] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801a24b8cc0
[49466.349942] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[49467.006344] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[49467.007356] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[49467.007359] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[49467.009384] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[49467.009387] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[49467.010347] ata1.00: configured for UDMA/133
[49467.026437] sd 0:0:0:0: [sda] Starting disk
[49467.047997] PM: resume of devices complete after 2336.954 msecs
[49467.056364] PM: Finishing wakeup.
[49467.056365] Restarting tasks ... done.
[49467.063176] status interrupt: c0 03
[49467.063682] video LNXVIDEO:00: Restoring backlight state
[49467.070624] usb 3-3.4.1: USB disconnect, device number 12
[49467.111251] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88001f1ad900
[49467.198552] usb 3-3.4.1: new full-speed USB device number 16 using xhci_hcd
[49467.216701] usb 3-3.4.1: New USB device found, idVendor=1532, idProduct=0012
[49467.216711] usb 3-3.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[49467.216715] usb 3-3.4.1: Product: Razer Salmosa
[49467.216717] usb 3-3.4.1: Manufacturer: Razer
[49467.216940] xhci_hcd 0000:00:14.0: Not enough bandwidth on HS bus for newly activated TT.
[49467.216946] xhci_hcd 0000:00:14.0: Not enough bandwidth
[49467.216955] usb 3-3.4.1: can't set config #1, error -12
[49467.217635] usb 3-3.4.2: USB disconnect, device number 13
[49467.241322] mmc0: new high speed SDHC card at address e624
[49467.241445] mmcblk0: mmc0:e624 SU32G 29.7 GiB
[49467.252179] mmcblk0: p1
[49467.318914] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88001f1adf80
[49467.318923] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88001f1ad300
[49467.390613] usb 3-3.4.2: new low-speed USB device number 17 using xhci_hcd
[49467.434073] usb 3-3.4.2: New USB device found, idVendor=046d, idProduct=c30e
[49467.434076] usb 3-3.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[49467.434078] usb 3-3.4.2: Product: HID compliant keyboard
[49467.434079] usb 3-3.4.2: Manufacturer: Logitech
[49467.434179] usb 3-3.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[49467.434183] usb 3-3.4.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: linux-image-3.13.0-24-generic 3.13.0-24.47
ProcVersionSignature: Ubuntu 3.13.0-24.47-generic 3.13.9
Uname: Linux 3.13.0-24-generic x86_64
ApportVersion: 2.14.1-0ubuntu3
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: mastier 4325 F.... pulseaudio
/dev/snd/controlC0: mastier 4325 F.... pulseaudio
CurrentDesktop: Unity
Date: Mon May 12 20:29:01 2014
HibernationDevice: RESUME=UUID=f6738183-910b-49b9-b769-898c55ff5967
InstallationDate: Installed on 2012-10-25 (564 days ago)
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
MachineType: LENOVO 34352NG
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-24-generic root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.13.0-24-generic N/A
linux-backports-modules-3.13.0-24-generic N/A
linux-firmware 1.127
SourcePackage: linux
UpgradeStatus: Upgraded to trusty on 2014-04-18 (24 days ago)
dmi.bios.date: 12/05/2013
dmi.bios.vendor: LENOVO
dmi.bios.version: GCET97WW (2.57 )
dmi.board.asset.tag: Not Available
dmi.board.name: 34352NG
dmi.board.vendor: LENOVO
dmi.board.version: Not Defined
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: dmi:bvnLENOVO:bvrGCET97WW(2.57):bd12/05/2013:svnLENOVO:pn34352NG:pvrThinkPadX230Tablet:rvnLENOVO:rn34352NG:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 34352NG
dmi.product.version: ThinkPad X230 Tablet
dmi.sys.vendor: LENOVO
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1318771/+subscriptions
References