kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #62815
[Bug 769527] Re: Missing rpcsec_gss_krb5 module
This bug was fixed in the package linux - 3.13.0-27.50
---------------
linux (3.13.0-27.50) trusty; urgency=low
[ Brad Figg ]
* Revert "rtlwifi: Set the link state"
linux (3.13.0-27.49) trusty; urgency=low
[ Brad Figg ]
* Revert "SAUCE: (no-up) HID: rmi: do not stop the device at the end of
probe"
* Revert "SAUCE: (no-up) HID: rmi: introduce RMI driver for Synaptics
touchpads"
* Revert "[Config] CONFIG_HID_RMI=m"
linux (3.13.0-26.48) trusty; urgency=low
[ Benjamin Tissoires ]
* SAUCE: (no-up) HID: rmi: introduce RMI driver for Synaptics touchpads
- LP: #1305522
* SAUCE: (no-up) HID: rmi: do not stop the device at the end of probe
- LP: #1305522
[ Kamal Mostafa ]
* Merged back Ubuntu-3.13.0-24.47 security release
* Revert "n_tty: Fix n_tty_write crash when echoing in raw mode"
- LP: #1314762
* Release Tracking Bug
- LP: #1316835
[ Tim Gardner ]
* [Config] CONFIG_HID_RMI=m
- LP: #1305522
* [Config] CONFIG_CRYPTO_DEV_NX=n for ppc64el
- LP: #1314625
* [Config] CONFIG_ZSWAP=y
- LP: #1315203
* Add rpcsec_gss_krb5 to generic inclusion list
- LP: #769527
[ Upstream Kernel Changes ]
* HID: hidraw: make comment more accurate and nicer
- LP: #1305522
* HID: remove hid_get_raw_report in struct hid_device
- LP: #1305522
* HID: i2c-hid: implement ll_driver transport-layer callbacks
- LP: #1305522
* HID: add inliners for ll_driver transport-layer callbacks
- LP: #1305522
* HID: Add transport-driver callbacks to the hid_ll_driver struct
- LP: #1305522
* drm/nouveau: fail runtime pm properly.
- LP: #1313986
* drm/nouveau: don't suspend/resume display on runtime s/r
- LP: #1313986
* n_tty: Fix n_tty_write crash when echoing in raw mode
- LP: #1314762
- CVE-2014-0196
* floppy: ignore kernel-only members in FDRAWCMD ioctl input
- LP: #1316729
- CVE-2014-1737
* floppy: don't write kernel-only members to FDRAWCMD ioctl output
- LP: #1316735
- CVE-2014-1738
linux (3.13.0-25.47) trusty; urgency=low
[ Joseph Salisbury ]
* Release Tracking Bug
- LP: #1313868
[ Adam Lee ]
* [Config] CONFIG_RTL8723BE=m, CONFIG_RTL8723_COMMON=m
- LP: #1240940
[ Alex Hung ]
* SAUCE: (no-up) dell-led: add mic mute led interface
- LP: #1308297
[ Andy Whitcroft ]
* SAUCE: (no-up) powerpc: Increase COMMAND_LINE_SIZE to 2048 from 512.
- LP: #1306677
[ Ben Collins ]
* [Config] Disable PAMU on Freescale kernels
- LP: #1311738
[ Tim Gardner ]
* Revert "SAUCE: x86, hyperv: bypass the timer_irq_works() check"
- LP: #1311683
* SAUCE: (no-up) ALSA: usb-audio: Suppress repetitive debug messages from
retire_playback_urb()
- LP: #1305133
* SAUCE: (no-up) 'BUG:' message unnecessarily triggers kerneloops
- LP: #1305480
* [Config] CONFIG_POWERNV_CPUFREQ=m
- LP: #1309576
* [Config] CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y for ppc64el
- LP: #1309576
* [Config] CONFIG_TRANSPARENT_HUGEPAGE=n for arm64
- LP: #1309221
* [Config] CONFIG_MEMCG_KMEM=y
- LP: #1309586
* [Config] CONFIG_CRASH_DUMP=y for ppc64el
- LP: #1312783
[ Upstream Kernel Changes ]
* Revert "rtlwifi: rtl8188ee: enable MSI interrupts mode"
- LP: #1310512
* mac80211: add length check in ieee80211_is_robust_mgmt_frame()
- LP: #1240940
* rtlwifi: rtl8723ae: rtl8723-common: Create new driver for common code
- LP: #1240940
* rtlwifi: rtl8723ae: rtl8723-common: Copy common firmware code
- LP: #1240940
* rtlwifi: rtl8723ae: rtl8723-common: Copy common dynamic power
management code
- LP: #1240940
* rtlwifi: rtl8723be: Add new driver
- LP: #1240940
* selinux: correctly label /proc inodes in use before the policy is
loaded
- LP: #1309007
* net: sctp: fix skb leakage in COOKIE ECHO path of chunk->auth_chunk
- LP: #1309007
* bridge: multicast: add sanity check for query source addresses
- LP: #1309007
* tipc: allow connection shutdown callback to be invoked in advance
- LP: #1309007
* tipc: fix connection refcount leak
- LP: #1309007
* tipc: drop subscriber connection id invalidation
- LP: #1309007
* tipc: fix memory leak during module removal
- LP: #1309007
* tipc: don't log disabled tasklet handler errors
- LP: #1309007
* inet: frag: make sure forced eviction removes all frags
- LP: #1309007
* net: unix: non blocking recvmsg() should not return -EINTR
- LP: #1309007
* ipv6: Fix exthdrs offload registration.
- LP: #1309007
* bnx2: Fix shutdown sequence
- LP: #1309007
* pkt_sched: fq: do not hold qdisc lock while allocating memory
- LP: #1309007
* Xen-netback: Fix issue caused by using gso_type wrongly
- LP: #1309007
* vlan: Set correct source MAC address with TX VLAN offload enabled
- LP: #1309007
* tcp: tcp_release_cb() should release socket ownership
- LP: #1309007
* bridge: multicast: add sanity check for general query destination
- LP: #1309007
* bridge: multicast: enable snooping on general queries only
- LP: #1309007
* net: socket: error on a negative msg_namelen
- LP: #1309007
* bonding: set correct vlan id for alb xmit path
- LP: #1309007
* eth: fec: Fix lost promiscuous mode after reconnecting cable
- LP: #1309007
* ipv6: Avoid unnecessary temporary addresses being generated
- LP: #1309007
* ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment
properly
- LP: #1309007
* net: cdc_ncm: fix control message ordering
- LP: #1309007
* vxlan: fix potential NULL dereference in arp_reduce()
- LP: #1309007
* vxlan: fix nonfunctional neigh_reduce()
- LP: #1309007
* tcp: syncookies: do not use getnstimeofday()
- LP: #1309007
* rtnetlink: fix fdb notification flags
- LP: #1309007
* ipmr: fix mfc notification flags
- LP: #1309007
* ip6mr: fix mfc notification flags
- LP: #1309007
* net: micrel : ks8851-ml: add vdd-supply support
- LP: #1309007
* netpoll: fix the skb check in pkt_is_ns
- LP: #1309007
* tipc: fix spinlock recursion bug for failed subscriptions
- LP: #1309007
* ip_tunnel: Fix dst ref-count.
- LP: #1309007
* tg3: Do not include vlan acceleration features in vlan_features
- LP: #1309007
* virtio-net: correct error handling of virtqueue_kick()
- LP: #1309007
* usbnet: include wait queue head in device structure
- LP: #1309007
* vlan: Set hard_header_len according to available acceleration
- LP: #1309007
* vhost: fix total length when packets are too short
- LP: #1309007
- CVE-2014-0077
* tcp: fix get_timewait4_sock() delay computation on 64bit
- LP: #1309007
* xen-netback: remove pointless clause from if statement
- LP: #1309007
* ipv6: some ipv6 statistic counters failed to disable bh
- LP: #1309007
* netlink: don't compare the nul-termination in nla_strcmp
- LP: #1309007
* xen-netback: disable rogue vif in kthread context
- LP: #1309007
* Call efx_set_channels() before efx->type->dimension_resources()
- LP: #1309007
* net: vxlan: fix crash when interface is created with no group
- LP: #1309007
* isdnloop: Validate NUL-terminated strings from user.
- LP: #1309007
* isdnloop: several buffer overflows
- LP: #1309007
* powernow-k6: disable cache when changing frequency
- LP: #1309007
* powernow-k6: correctly initialize default parameters
- LP: #1309007
* powernow-k6: reorder frequencies
- LP: #1309007
* ARC: [nsimosci] Change .dts to use generic 8250 UART
- LP: #1309007
* ARC: [nsimosci] Unbork console
- LP: #1309007
* futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test
- LP: #1309007
* m68k: Skip futex_atomic_cmpxchg_inatomic() test
- LP: #1309007
* crypto: ghash-clmulni-intel - use C implementation for setkey()
- LP: #1309007
* Linux 3.13.10
- LP: #1309007
* cpufreq: powernv: cpufreq driver for powernv platform
- LP: #1309576
* cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store
pstate ids
- LP: #1309576
* cpufreq: powernv: Select CPUFreq related Kconfig options for powernv
- LP: #1309576
* support Thinkpad X1 Carbon 2nd generation's adaptive keyboard
- LP: #1309609
* save and restore adaptive keyboard mode for suspend and,resume
- LP: #1309609
* user namespace: fix incorrect memory barriers
- LP: #1311683
* Char: ipmi_bt_sm, fix infinite loop
- LP: #1311683
* x86, hyperv: Bypass the timer_irq_works() check
- LP: #1311683
* x86: Adjust irq remapping quirk for older revisions of 5500/5520
chipsets
- LP: #1311683
* PCI: designware: Fix RC BAR to be single 64-bit non-prefetchable memory
BAR
- LP: #1311683
* PCI: designware: Fix iATU programming for cfg1, io and mem viewport
- LP: #1311683
* ACPI / button: Add ACPI Button event via netlink routine
- LP: #1311683
* PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not
enabled
- LP: #1311683
* staging: comedi: 8255_pci: initialize MITE data window
- LP: #1311683
* tty: Set correct tty name in 'active' sysfs attribute
- LP: #1311683
* tty: Fix low_latency BUG
- LP: #1311683
* SCSI: sd: don't fail if the device doesn't recognize SYNCHRONIZE CACHE
- LP: #1311683
* pid_namespace: pidns_get() should check task_active_pid_ns() != NULL
- LP: #1311683
* Bluetooth: Fix removing Long Term Key
- LP: #1311683
* ima: restore the original behavior for sending data with ima template
- LP: #1311683
* backing_dev: fix hung task on sync
- LP: #1311683
* bdi: avoid oops on device removal
- LP: #1311683
* xfs: fix directory hash ordering bug
- LP: #1311683
* Btrfs: skip submitting barrier for missing device
- LP: #1311683
* Btrfs: fix deadlock with nested trans handles
- LP: #1311683
* ext4: fix error return from ext4_ext_handle_uninitialized_extents()
- LP: #1311683
* ext4: fix partial cluster handling for bigalloc file systems
- LP: #1311683
* ext4: fix premature freeing of partial clusters split across leaf
blocks
- LP: #1311683
* jffs2: Fix segmentation fault found in stress test
- LP: #1311683
* jffs2: Fix crash due to truncation of csize
- LP: #1311683
* jffs2: avoid soft-lockup in jffs2_reserve_space_gc()
- LP: #1311683
* jffs2: remove from wait queue after schedule()
- LP: #1311683
* sparc32: fix build failure for arch_jump_label_transform
- LP: #1311683
* sparc64: don't treat 64-bit syscall return codes as 32-bit
- LP: #1311683
* sparc64: Make sure %pil interrupts are enabled during hypervisor yield.
- LP: #1311683
* wait: fix reparent_leader() vs EXIT_DEAD->EXIT_ZOMBIE race
- LP: #1311683
* exit: call disassociate_ctty() before exit_task_namespaces()
- LP: #1311683
* Linux 3.13.11
- LP: #1311683
* powerpc/le: Enable RTAS events support
- LP: #1312230
* net: ipv4: current group_info should be put after using.
- CVE-2014-2851
* powerpc/relocate fix relocate processing in LE mode
- LP: #1312783
-- Brad Figg <brad.figg@xxxxxxxxxxxxx> Thu, 15 May 2014 10:21:43 -0700
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/769527
Title:
Missing rpcsec_gss_krb5 module
Status in “linux” package in Ubuntu:
Fix Released
Status in “linux” source package in Trusty:
Fix Released
Status in “linux” source package in Utopic:
Fix Released
Bug description:
Binary package hint: linux-image-2.6.38-8-virtual
The module rpcsec_gss_krb5 is missing:
dumaresq@borgil:/lib/modules/2.6.38-8-virtual/kernel/net/sunrpc/auth_gss$ ls -l
total 72
-rw-r--r-- 1 root root 72336 2011-04-11 01:06 auth_rpcgss.ko
dumaresq@borgil:/lib/modules/2.6.38-8-virtual/kernel/net/sunrpc/auth_gss$
Where as on my "real" machine:
root@middleearth:/lib/modules/2.6.38-8-server/kernel/net/sunrpc/auth_gss# ls -l
total 124
-rw-r--r-- 1 root root 72336 2011-04-11 00:46 auth_rpcgss.ko
-rw-r--r-- 1 root root 51776 2011-04-11 00:46 rpcsec_gss_krb5.ko
root@middleearth:/lib/modules/2.6.38-8-server/kernel/net/sunrpc/auth_gss#
uname -a
Linux borgil 2.6.38-8-virtual #42-Ubuntu SMP Mon Apr 11 04:06:34 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
cat /proc/version_signature
Ubuntu 2.6.38-8.42-virtual 2.6.38.2
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-8-virtual (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 04:06:34 UTC 2011 (Ubuntu 2.6.38-8.42-virtual 2.6.38.2)
[ 0.000000] Command line: root=UUID=210a1bd7-248d-4f8d-aa03-6efa9927332e ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fffd000 (usable)
[ 0.000000] BIOS-e820: 000000003fffd000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3fffd max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] found SMP MP-table at [ffff8800000fd790] fd790
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003fffd000
[ 0.000000] 0000000000 - 003fe00000 page 2M
[ 0.000000] 003fe00000 - 003fffd000 page 4k
[ 0.000000] kernel direct mapping tables up to 3fffd000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 37bd3000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fd740 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 000000003fffdc40 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 000000003ffffe70 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 000000003fffde40 01FB7 (v01 BXPC BXDSDT 00000001 INTL 20090123)
[ 0.000000] ACPI: FACS 000000003ffffe00 00040
[ 0.000000] ACPI: SSDT 000000003fffdda0 0009E (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 000000003fffdcc0 00072 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 000000003fffdc80 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fffd000
[ 0.000000] Initmem setup node 0 0000000000000000-000000003fffd000
[ 0.000000] NODE_DATA [000000003fff8000 - 000000003fffcfff]
[ 0.000000] kvm-clock: Using msrs 12 and 11
[ 0.000000] kvm-clock: cpu 0, msr 0:1adca81, boot clock
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fffd
[ 0.000000] On node 0 totalpages: 262028
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3528 pages used for memmap
[ 0.000000] DMA32 zone: 254517 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:beffc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s83840 r8192 d22656 u2097152
[ 0.000000] pcpu-alloc: s83840 r8192 d22656 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] kvm-clock: cpu 0, msr 0:3fc13a81, primary cpu clock
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258438
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=210a1bd7-248d-4f8d-aa03-6efa9927332e ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1015856k/1048564k available (6041k kernel code, 452k absent, 32256k reserved, 4997k data, 880k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:256 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 10485760 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 2673.298 MHz processor.
[ 0.020000] Calibrating delay loop (skipped) preset value.. 5346.59 BogoMIPS (lpj=26732980)
[ 0.020000] pid_max: default: 32768 minimum: 301
[ 0.020000] Security Framework initialized
[ 0.020000] AppArmor: AppArmor initialized
[ 0.020000] Yama: becoming mindful.
[ 0.020000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.020000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.020000] Mount-cache hash table entries: 256
[ 0.020000] Initializing cgroup subsys ns
[ 0.020000] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.020000] Initializing cgroup subsys cpuacct
[ 0.020000] Initializing cgroup subsys memory
[ 0.020000] Initializing cgroup subsys devices
[ 0.020000] Initializing cgroup subsys freezer
[ 0.020000] Initializing cgroup subsys net_cls
[ 0.020000] Initializing cgroup subsys blkio
[ 0.020000] mce: CPU supports 10 MCE banks
[ 0.020000] SMP alternatives: switching to UP code
[ 0.029280] Freeing SMP alternatives: 20k freed
[ 0.029292] ACPI: Core revision 20110112
[ 0.030081] ftrace: allocating 24682 entries in 97 pages
[ 0.040099] Setting APIC routing to flat
[ 0.041236] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.041238] CPU0: Intel QEMU Virtual CPU version 0.14.0 stepping 03
[ 0.050000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
[ 0.050000] Brought up 1 CPUs
[ 0.050000] Total of 1 processors activated (5346.59 BogoMIPS).
[ 0.050000] devtmpfs: initialized
[ 0.050000] print_constraints: dummy:
[ 0.050000] Time: 14:34:04 Date: 04/23/11
[ 0.050000] NET: Registered protocol family 16
[ 0.050000] ACPI: bus type pci registered
[ 0.050000] PCI: Using configuration type 1 for base access
[ 0.050000] bio: create slab <bio-0> at 0
[ 0.050000] ACPI: EC: Look up EC in DSDT
[ 0.050000] ACPI: Interpreter enabled
[ 0.050000] ACPI: (supports S0 S3 S4 S5)
[ 0.050000] ACPI: Using IOAPIC for interrupt routing
[ 0.050000] ACPI: No dock devices found.
[ 0.050000] HEST: Table not found.
[ 0.050000] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.050000] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.050000] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.050000] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.050000] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.050000] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
[ 0.050000] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.050000] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.050000] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[ 0.050000] pci 0000:00:01.1: reg 20: [io 0xc000-0xc00f]
[ 0.050000] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[ 0.050000] pci 0000:00:01.2: reg 20: [io 0xc020-0xc03f]
[ 0.050000] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[ 0.050000] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.050000] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.050000] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[ 0.051149] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
[ 0.052542] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff]
[ 0.060711] pci 0000:00:02.0: reg 30: [mem 0xf2010000-0xf201ffff pref]
[ 0.060871] pci 0000:00:03.0: [1af4:1000] type 0 class 0x000200
[ 0.060951] pci 0000:00:03.0: reg 10: [io 0xc040-0xc05f]
[ 0.060994] pci 0000:00:03.0: reg 14: [mem 0xf2020000-0xf2020fff]
[ 0.061200] pci 0000:00:03.0: reg 30: [mem 0xf2028000-0xf202ffff pref]
[ 0.061324] pci 0000:00:04.0: [1af4:1002] type 0 class 0x000500
[ 0.061376] pci 0000:00:04.0: reg 10: [io 0xc060-0xc07f]
[ 0.061793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.064215] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.064284] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.064344] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.064403] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.064466] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 0.064705] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.064708] vgaarb: loaded
[ 0.064952] SCSI subsystem initialized
[ 0.065097] libata version 3.00 loaded.
[ 0.065167] usbcore: registered new interface driver usbfs
[ 0.065180] usbcore: registered new interface driver hub
[ 0.065212] usbcore: registered new device driver usb
[ 0.065352] wmi: Mapper loaded
[ 0.065358] PCI: Using ACPI for IRQ routing
[ 0.065363] PCI: pci_cache_line_size set to 64 bytes
[ 0.065482] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.065486] reserve RAM buffer: 000000003fffd000 - 000000003fffffff
[ 0.065631] NetLabel: Initializing
[ 0.065634] NetLabel: domain hash size = 128
[ 0.065635] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.065652] NetLabel: unlabeled traffic allowed by default
[ 0.065714] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.065734] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.065737] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.070073] Switching to clocksource kvm-clock
[ 0.077581] AppArmor: AppArmor Filesystem Enabled
[ 0.077610] pnp: PnP ACPI init
[ 0.077624] ACPI: bus type pnp registered
[ 0.077657] pnp 00:00: [bus 00-ff]
[ 0.077659] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.077661] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.077663] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.077665] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.077666] pnp 00:00: [mem 0xe0000000-0xfebfffff window]
[ 0.077705] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.077751] pnp 00:01: [io 0x0070-0x0071]
[ 0.077796] pnp 00:01: [irq 8]
[ 0.077798] pnp 00:01: [io 0x0072-0x0077]
[ 0.077824] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.077852] pnp 00:02: [io 0x0060]
[ 0.077853] pnp 00:02: [io 0x0064]
[ 0.077873] pnp 00:02: [irq 1]
[ 0.077905] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.077946] pnp 00:03: [irq 12]
[ 0.077971] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.078000] pnp 00:04: [io 0x03f2-0x03f5]
[ 0.078001] pnp 00:04: [io 0x03f7]
[ 0.078020] pnp 00:04: [irq 6]
[ 0.078022] pnp 00:04: [dma 2]
[ 0.078048] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.078157] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.078184] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.078317] pnp: PnP ACPI: found 6 devices
[ 0.078319] ACPI: ACPI bus type pnp unregistered
[ 0.079904] Switched to NOHz mode on CPU #0
[ 0.084431] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.084433] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
[ 0.084476] NET: Registered protocol family 2
[ 0.084560] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.085028] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.086029] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.086460] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.086465] TCP reno registered
[ 0.086470] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.086484] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.086548] NET: Registered protocol family 1
[ 0.086564] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.086582] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.086598] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.086685] pci 0000:00:02.0: Boot video device
[ 0.086706] PCI: CLS 0 bytes, default 64
[ 0.086981] audit: initializing netlink socket (disabled)
[ 0.086992] type=2000 audit(1303569245.070:1): initialized
[ 0.099045] Trying to unpack rootfs image as initramfs...
[ 0.110930] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.121579] VFS: Disk quotas dquot_6.5.2
[ 0.121624] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.122172] fuse init (API version 7.16)
[ 0.122257] msgmni has been set to 1984
[ 0.130171] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.130197] io scheduler noop registered
[ 0.130199] io scheduler deadline registered (default)
[ 0.130231] io scheduler cfq registered
[ 0.130311] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.130329] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.130452] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.130460] ACPI: Power Button [PWRF]
[ 0.130756] ACPI: acpi_idle registered with cpuidle
[ 0.131424] ERST: Table is not found!
[ 0.131579] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.131603] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[ 0.131629] virtio-pci 0000:00:03.0: setting latency timer to 64
[ 0.131781] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.131801] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[ 0.131822] virtio-pci 0000:00:04.0: setting latency timer to 64
[ 0.131924] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.132930] Linux agpgart interface v0.103
[ 0.133889] brd: module loaded
[ 0.134344] loop: module loaded
[ 0.134415] i2c-core: driver [adp5520] using legacy suspend method
[ 0.134417] i2c-core: driver [adp5520] using legacy resume method
[ 0.134509] ata_piix 0000:00:01.1: version 2.13
[ 0.134587] ata_piix 0000:00:01.1: setting latency timer to 64
[ 0.134927] scsi0 : ata_piix
[ 0.140035] scsi1 : ata_piix
[ 0.140077] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 0.140079] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[ 0.140325] Fixed MDIO Bus: probed
[ 0.140348] PPP generic driver version 2.4.2
[ 0.140386] tun: Universal TUN/TAP device driver, 1.6
[ 0.140388] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.140592] virtio-pci 0000:00:03.0: irq 40 for MSI/MSI-X
[ 0.140609] virtio-pci 0000:00:03.0: irq 41 for MSI/MSI-X
[ 0.140625] virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
[ 0.141608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.141620] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.141629] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.141687] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
[ 0.141704] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 0.141713] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 0.141747] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 0.141838] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c020
[ 0.141993] hub 1-0:1.0: USB hub found
[ 0.141997] hub 1-0:1.0: 2 ports detected
[ 0.142097] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.205787] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.205795] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.205856] mousedev: PS/2 mouse device common for all mice
[ 0.206036] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.206124] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.206250] device-mapper: uevent: version 1.0.3
[ 0.206396] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@xxxxxxxxxx
[ 0.206716] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.207106] device-mapper: multipath: version 1.2.0 loaded
[ 0.207111] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.210110] cpuidle: using governor ladder
[ 0.210112] cpuidle: using governor menu
[ 0.210375] TCP cubic registered
[ 0.210581] NET: Registered protocol family 10
[ 0.211402] NET: Registered protocol family 17
[ 0.211430] Registering the dns_resolver key type
[ 0.211615] PM: Hibernation image not present or could not be loaded.
[ 0.211631] registered taskstats version 1
[ 0.211847] Magic number: 7:230:587
[ 0.211983] rtc_cmos 00:01: setting system clock to 2011-04-23 14:34:04 UTC (1303569244)
[ 0.211989] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.211992] EDD information not available.
[ 0.257424] Freeing initrd memory: 4212k freed
[ 0.410969] ata1.00: ATA-7: QEMU HARDDISK, 0.14.0, max UDMA/100
[ 0.410972] ata1.00: 10485760 sectors, multi 16: LBA48
[ 0.410979] ata1.01: ATA-7: QEMU HARDDISK, 0.14.0, max UDMA/100
[ 0.410981] ata1.01: 20971520 sectors, multi 16: LBA48
[ 0.411451] ata1.00: configured for MWDMA2
[ 0.411824] ata1.01: configured for MWDMA2
[ 0.411934] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.14 PQ: 0 ANSI: 5
[ 0.412091] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.412204] scsi 0:0:1:0: Direct-Access ATA QEMU HARDDISK 0.14 PQ: 0 ANSI: 5
[ 0.412323] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 0.412388] sd 0:0:0:0: [sda] 10485760 512-byte logical blocks: (5.36 GB/5.00 GiB)
[ 0.412431] sd 0:0:0:0: [sda] Write Protect is off
[ 0.412435] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.412453] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 0.413043] sda: sda1 sda2
[ 0.413231] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.413239] sd 0:0:1:0: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
[ 0.413274] sd 0:0:1:0: [sdb] Write Protect is off
[ 0.413276] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.413291] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 0.413643] sdb: sdb1 sdb2
[ 0.413820] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 0.415306] Freeing unused kernel memory: 880k freed
[ 0.415799] Write protecting the kernel read-only data: 10240k
[ 0.416457] Freeing unused kernel memory: 84k freed
[ 0.423632] Freeing unused kernel memory: 1416k freed
[ 0.442761] <30>udev[62]: starting version 167
[ 0.595564] FDC 0 is a S82078B
[ 0.620462] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.773329] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[ 0.820143] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 0.861718] <30>udev[244]: starting version 167
[ 0.914402] Adding 1951740k swap on /dev/sda2. Priority:-1 extents:1 across:1951740k
[ 0.948529] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.985183] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.058413] RPC: Registered udp transport module.
[ 1.058416] RPC: Registered tcp transport module.
[ 1.058417] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.152957] FS-Cache: Loaded
[ 1.167975] type=1400 audit(1303569245.445:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/avahi-daemon" pid=393 comm="apparmor_parser"
[ 1.170086] Refined TSC clocksource calibration: 2673.301 MHz.
[ 1.209733] FS-Cache: Netfs 'nfs' registered for caching
[ 1.271223] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 1.395116] type=1400 audit(1303569245.675:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=468 comm="apparmor_parser"
[ 1.395674] type=1400 audit(1303569245.675:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=468 comm="apparmor_parser"
[ 1.396018] type=1400 audit(1303569245.675:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=468 comm="apparmor_parser"
[ 1.406462] type=1400 audit(1303569245.685:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=473 comm="apparmor_parser"
[ 1.785247] type=1400 audit(1303569246.065:7): apparmor="STATUS" operation="profile_load" name="/bin/ping" pid=599 comm="apparmor_parser"
[ 1.797726] type=1400 audit(1303569246.075:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=609 comm="apparmor_parser"
[ 1.801711] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[ 1.804879] type=1400 audit(1303569246.085:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=609 comm="apparmor_parser"
[ 1.805510] type=1400 audit(1303569246.085:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=609 comm="apparmor_parser"
[ 2.758954] lp: driver loaded but no devices found
[ 2.843303] ppdev: user-space parallel port driver
ProblemType: Bug
DistroRelease: Ubuntu 11.04
Package: linux-image-2.6.38-8-virtual 2.6.38-8.42
ProcVersionSignature: Ubuntu 2.6.38-8.42-virtual 2.6.38.2
Uname: Linux 2.6.38-8-virtual x86_64
AlsaDevices:
total 0
crw------- 1 root root 116, 1 2011-04-23 10:34 seq
crw------- 1 root root 116, 33 2011-04-23 10:34 timer
AplayDevices: Error: [Errno 2] No such file or directory
Architecture: amd64
ArecordDevices: Error: [Errno 2] No such file or directory
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
CRDA: Error: [Errno 2] No such file or directory
CurrentDmesg: [ 2.843303] ppdev: user-space parallel port driver
Date: Sat Apr 23 10:45:39 2011
IwConfig: Error: [Errno 2] No such file or directory
Lspci: Error: [Errno 2] No such file or directory
Lsusb: Error: [Errno 2] No such file or directory
MachineType: Bochs Bochs
PciMultimedia:
ProcEnviron:
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcKernelCmdLine: root=UUID=210a1bd7-248d-4f8d-aa03-6efa9927332e ro quiet splash
RelatedPackageVersions:
linux-restricted-modules-2.6.38-8-virtual N/A
linux-backports-modules-2.6.38-8-virtual N/A
linux-firmware 1.52
RfKill: Error: [Errno 2] No such file or directory
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 01/01/2007
dmi.bios.vendor: Bochs
dmi.bios.version: Bochs
dmi.chassis.type: 1
dmi.chassis.vendor: Bochs
dmi.modalias: dmi:bvnBochs:bvrBochs:bd01/01/2007:svnBochs:pnBochs:pvr:cvnBochs:ct1:cvr:
dmi.product.name: Bochs
dmi.sys.vendor: Bochs
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/769527/+subscriptions
