kernel-packages team mailing list archive

Thread
Date
[Bug 1353050] ProcInterrupts.txt

To: kernel-packages@xxxxxxxxxxxxxxxxxxx
From: Prophet6 <1353050@xxxxxxxxxxxxxxxxxx>
Date: Tue, 05 Aug 2014 19:17:25 -0000
Reply-to: Bug 1353050 <1353050@xxxxxxxxxxxxxxxxxx>
Sender: bounces@xxxxxxxxxxxxx
apport information

** Attachment added: "ProcInterrupts.txt"
   https://bugs.launchpad.net/bugs/1353050/+attachment/4170580/+files/ProcInterrupts.txt

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1353050

Title:
  External USB3 device does not work in USB3 port

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  External USB3 drive (Seagate GoFlex) connected to a USB3 port fails to
  mount on OS. Same unit works on USB2 ports (at USB2 speeds).

  I expect my external USB3 drive to be recognized by the OS and able to
  operate at USB3 speeds.

  Mint 17 64-bit Cinammon (Ubuntu 14.04). Necessary details below or
  attached.

  Ubuntu 3.13.0-24.46-generic 3.13.9
  Description:	Linux Mint 17 Qiana
  Release:	17

  I have a Gigabyte GA-990FXA-UD3 motherboard.

  UEFI/BIOS set to enable legacy USB support and both XHCI and EHCI
  handoff to OS (disabling these has no effect).

  Same bug reported here:
  https://bugs.launchpad.net/linuxmint/+bug/1348669

  $dmesg | grep "usb 9-4"
  [ 2133.637961] usb 9-4: new SuperSpeed USB device number 2 using xhci_hcd
  [ 2133.653736] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2133.654362] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2133.654370] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2133.654377] usb 9-4: Product: GoFlex Desk
  [ 2133.654383] usb 9-4: Manufacturer: Seagate
  [ 2133.654388] usb 9-4: SerialNumber: NA0LP2NG
  [ 2147.687559] usb 9-4: reset SuperSpeed USB device number 2 using xhci_hcd
  [ 2147.703314] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2147.703610] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2147.703784] usb 9-4: USB disconnect, device number 2
  [ 2148.092071] usb 9-4: new SuperSpeed USB device number 3 using xhci_hcd
  [ 2148.107823] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2148.108449] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2148.108457] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2148.108464] usb 9-4: Product: GoFlex Desk
  [ 2148.108470] usb 9-4: Manufacturer: Seagate
  [ 2148.108475] usb 9-4: SerialNumber: NA0LP2NG
  [ 2154.227723] usb 9-4: reset SuperSpeed USB device number 3 using xhci_hcd
  [ 2154.243565] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2154.243813] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2154.244021] usb 9-4: USB disconnect, device number 3
  [ 2154.632267] usb 9-4: new SuperSpeed USB device number 4 using xhci_hcd
  [ 2154.648038] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2154.648678] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2154.648687] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2154.648694] usb 9-4: Product: GoFlex Desk
  [ 2154.648700] usb 9-4: Manufacturer: Seagate
  [ 2154.648705] usb 9-4: SerialNumber: NA0LP2NG
  [ 2160.768006] usb 9-4: reset SuperSpeed USB device number 4 using xhci_hcd
  [ 2160.783745] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2160.783997] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2160.784203] usb 9-4: USB disconnect, device number 4
  [ 2161.172418] usb 9-4: new SuperSpeed USB device number 5 using xhci_hcd
  [ 2161.188263] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2161.188887] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2161.188896] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2161.188903] usb 9-4: Product: GoFlex Desk
  [ 2161.188908] usb 9-4: Manufacturer: Seagate
  [ 2161.188913] usb 9-4: SerialNumber: NA0LP2NG
  [ 2167.308200] usb 9-4: reset SuperSpeed USB device number 5 using xhci_hcd
  [ 2167.323943] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2167.324190] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2167.324401] usb 9-4: USB disconnect, device number 5
  [ 2167.712527] usb 9-4: new SuperSpeed USB device number 6 using xhci_hcd
  [ 2167.728431] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2167.729066] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2167.729074] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2167.729081] usb 9-4: Product: GoFlex Desk
  [ 2167.729087] usb 9-4: Manufacturer: Seagate
  [ 2167.729092] usb 9-4: SerialNumber: NA0LP2NG
  [ 2173.848366] usb 9-4: reset SuperSpeed USB device number 6 using xhci_hcd
  [ 2173.864136] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2173.864388] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2173.864612] usb 9-4: USB disconnect, device number 6
  [ 2174.252856] usb 9-4: new SuperSpeed USB device number 7 using xhci_hcd
  [ 2174.268644] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2174.269349] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2174.269357] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2174.269364] usb 9-4: Product: GoFlex Desk
  [ 2174.269370] usb 9-4: Manufacturer: Seagate
  [ 2174.269375] usb 9-4: SerialNumber: NA0LP2NG
  [ 2180.388613] usb 9-4: reset SuperSpeed USB device number 7 using xhci_hcd
  [ 2180.404363] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2180.404611] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2180.404831] usb 9-4: USB disconnect, device number 7
  [ 2180.945241] usb 9-4: new SuperSpeed USB device number 8 using xhci_hcd
  [ 2180.961019] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2180.961691] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2180.961704] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2180.961712] usb 9-4: Product: GoFlex Desk
  [ 2180.961718] usb 9-4: Manufacturer: Seagate
  [ 2180.961723] usb 9-4: SerialNumber: NA0LP2NG
  [ 2187.080974] usb 9-4: reset SuperSpeed USB device number 8 using xhci_hcd
  [ 2187.096759] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2187.097008] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2187.097218] usb 9-4: USB disconnect, device number 8
  [ 2187.485426] usb 9-4: new SuperSpeed USB device number 9 using xhci_hcd
  [ 2187.501262] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2187.501891] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2187.501899] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2187.501905] usb 9-4: Product: GoFlex Desk
  [ 2187.501911] usb 9-4: Manufacturer: Seagate
  [ 2187.501916] usb 9-4: SerialNumber: NA0LP2NG
  [ 2193.621110] usb 9-4: reset SuperSpeed USB device number 9 using xhci_hcd
  [ 2193.636959] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2193.637216] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2193.637424] usb 9-4: USB disconnect, device number 9
  [ 2194.025521] usb 9-4: new SuperSpeed USB device number 10 using xhci_hcd
  [ 2194.041416] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2194.042070] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2194.042078] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2194.042085] usb 9-4: Product: GoFlex Desk
  [ 2194.042091] usb 9-4: Manufacturer: Seagate
  [ 2194.042096] usb 9-4: SerialNumber: NA0LP2NG
  [ 2200.161400] usb 9-4: reset SuperSpeed USB device number 10 using xhci_hcd
  [ 2200.177115] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2200.177388] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2200.177599] usb 9-4: USB disconnect, device number 10
  [ 2200.565859] usb 9-4: new SuperSpeed USB device number 11 using xhci_hcd
  [ 2200.581678] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2200.582342] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2200.582351] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2200.582358] usb 9-4: Product: GoFlex Desk
  [ 2200.582363] usb 9-4: Manufacturer: Seagate
  [ 2200.582368] usb 9-4: SerialNumber: NA0LP2NG
  [ 2206.701605] usb 9-4: reset SuperSpeed USB device number 11 using xhci_hcd
  [ 2206.717335] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2206.717582] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2206.717790] usb 9-4: USB disconnect, device number 11
  [ 2207.126038] usb 9-4: new SuperSpeed USB device number 12 using xhci_hcd
  [ 2207.141900] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2207.142578] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2207.142588] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2207.142595] usb 9-4: Product: GoFlex Desk
  [ 2207.142601] usb 9-4: Manufacturer: Seagate
  [ 2207.142606] usb 9-4: SerialNumber: NA0LP2NG
  [ 2213.261855] usb 9-4: reset SuperSpeed USB device number 12 using xhci_hcd
  [ 2213.277557] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2213.277809] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2213.278025] usb 9-4: USB disconnect, device number 12
  [ 2213.666203] usb 9-4: new SuperSpeed USB device number 13 using xhci_hcd
  [ 2213.682084] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2213.682709] usb 9-4: New USB device found, idVendor=0bc2, idProduct=50a5
  [ 2213.682717] usb 9-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
  [ 2213.682724] usb 9-4: Product: GoFlex Desk
  [ 2213.682729] usb 9-4: Manufacturer: Seagate
  [ 2213.682734] usb 9-4: SerialNumber: NA0LP2NG
  [ 2219.802029] usb 9-4: reset SuperSpeed USB device number 13 using xhci_hcd
  [ 2219.817772] usb 9-4: Parent hub missing LPM exit latency info.  Power management will be impacted.
  [ 2219.818020] usb 9-4: Busted HC?  Not enough HCD resources for old configuration.
  [ 2219.818212] usb 9-4: USB disconnect, device number 13
  --- 
  ApportVersion: 2.14.1-0ubuntu3.3
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC1:  terra      2551 F.... pulseaudio
   /dev/snd/controlC0:  terra      2551 F.... pulseaudio
   /dev/snd/pcmC0D0p:   terra      2551 F...m pulseaudio
  CurrentDesktop: X-Cinnamon
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=091e95f5-83e3-4453-8e4c-69b42ff82383
  InstallationDate: Installed on 2014-07-23 (13 days ago)
  InstallationMedia: Linux Mint 17 "Qiana" - Release amd64 20140530
  MachineType: Gigabyte Technology Co., Ltd. To be filled by O.E.M.
  NonfreeKernelModules: nvidia
  Package: linux (not installed)
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=<set>
   LANG=en_CA.UTF-8
   SHELL=/bin/bash
  ProcFB:
   
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=5a7e7709-cf07-4d16-9a2b-00cc78638015 ro iommu=soft quiet splash nomdmonddf nomdmonisw
  ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-24-generic N/A
   linux-backports-modules-3.13.0-24-generic  N/A
   linux-firmware                             1.127
  RfKill:
   0: phy0: Wireless LAN
   	Soft blocked: no
   	Hard blocked: no
  Tags:  qiana
  Uname: Linux 3.13.0-24-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers
  _MarkForUpload: True
  dmi.bios.date: 07/15/2013
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: F2
  dmi.board.asset.tag: To be filled by O.E.M.
  dmi.board.name: 990FXA-UD3
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.asset.tag: To Be Filled By O.E.M.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.version: To Be Filled By O.E.M.
  dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF2:bd07/15/2013:svnGigabyteTechnologyCo.,Ltd.:pnTobefilledbyO.E.M.:pvrTobefilledbyO.E.M.:rvnGigabyteTechnologyCo.,Ltd.:rn990FXA-UD3:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvrToBeFilledByO.E.M.:
  dmi.product.name: To be filled by O.E.M.
  dmi.product.version: To be filled by O.E.M.
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1353050/+subscriptions
References

[Bug 1353050] [NEW] External USB3 device does not work in USB3 port
From: Prophet6, 2014-08-05