kernel-packages team mailing list archive

Thread
Date
[Bug 577377] Status changed to Confirmed

To: kernel-packages@xxxxxxxxxxxxxxxxxxx
From: Brad Figg <brad.figg@xxxxxxxxxxxxx>
Date: Sat, 09 Aug 2014 10:30:20 -0000
Reply-to: Bug 577377 <577377@xxxxxxxxxxxxxxxxxx>
Sender: bounces@xxxxxxxxxxxxx
This change was made by a bot.

** Changed in: linux (Ubuntu)
       Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/577377

Title:
  DVB-T USB tuner dib0700 wrong initiated (no "cold state" step)

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  Hi,


  I'm running fully uptodate Ubuntu 10.04 and have the following problem
  with my DVB-T USB stick Terratec Cinergy T USB XXS (dib0700).


  The DVB-T stick is always attached to my PC and sometimes it doesn't
  work properly. Meaning I get a I/O error message while trying to watch
  TV with Kaffeine player (s. below DiB0070 I2C read failed). More over
  if I disconnect the stick there are NO messages about that events in
  kernel.log and any other USD device shows the same behavior - it
  doesn't work and there are no messages in reknel.log by connecting or
  disconnecting it.


  I noticed that this happens every time when the stick immediately
  found in warm state and the step of loading the firmware (dvb-usb-
  dib0700-1.20.fw) is missing.


  This is the kernel.log for the case the stick doesn't work


  May  4 20:10:17 vsn-desktop kernel: [   12.558714] dib0700: loaded
  with support for 13 different device-types

  May  4 20:10:17 vsn-desktop kernel: [   12.560036] dvb-usb: found a
  'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.

  May  4 20:10:17 vsn-desktop kernel: [   12.560707] dvb-usb: will pass
  the complete MPEG2 transport stream to the software demuxer.

  May  4 20:10:17 vsn-desktop kernel: [   12.560736] Linux video capture
  interface: v2.00

  May  4 20:10:17 vsn-desktop kernel: [   12.561431] DVB: registering
  new adapter (Terratec Cinergy T USB XXS (HD)/ T3)

  May  4 20:10:17 vsn-desktop kernel: [   12.579479] bttv: driver
  version 0.9.18 loaded

  May  4 20:10:17 vsn-desktop kernel: [   12.579484] bttv: using 8
  buffers with 2080k (520 pages) each for capture

  May  4 20:10:17 vsn-desktop kernel: [   12.580046] bttv: Bt8xx card
  found (0).

  May  4 20:10:17 vsn-desktop kernel: [   12.580065]   alloc irq_desc
  for 20 on node -1

  May  4 20:10:17 vsn-desktop kernel: [   12.580068]   alloc kstat_irqs
  on node -1

  May  4 20:10:17 vsn-desktop kernel: [   12.580078] bttv 0000:02:06.0:
  PCI INT A -> GSI 20 (level, low) -> IRQ 20

  May  4 20:10:17 vsn-desktop kernel: [   12.580091] bttv0: Bt878 (rev
  17) at 0000:02:06.0, irq: 20, latency: 32, mmio: 0xfdeff000

  May  4 20:10:17 vsn-desktop kernel: [   12.580126] bttv0: detected:
  Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c

  May  4 20:10:17 vsn-desktop kernel: [   12.580129] bttv0: using:
  Pinnacle PCTV Sat [card=94,autodetected]

  May  4 20:10:17 vsn-desktop kernel: [   12.580131] IRQ 20/bttv0:
  IRQF_DISABLED is not guaranteed on shared IRQs

  May  4 20:10:17 vsn-desktop kernel: [   12.580177] bttv0: gpio:
  en=00000000, out=00000000 in=009f00fc [init]

  May  4 20:10:17 vsn-desktop kernel: [   12.580284] bttv0: tuner absent

  May  4 20:10:17 vsn-desktop kernel: [   12.580403] bttv0: registered
  device video0

  May  4 20:10:17 vsn-desktop kernel: [   12.580492] bttv0: registered
  device vbi0

  May  4 20:10:17 vsn-desktop kernel: [   12.580522] bttv0: PLL:
  28636363 => 35468950 .. ok

  May  4 20:10:17 vsn-desktop kernel: [   12.612607] bttv0: add
  subdevice "dvb0"

  May  4 20:10:17 vsn-desktop kernel: [   12.636856] type=1505
  audit(1272996615.404:2):  operation="profile_load" pid=631
  name="/sbin/dhclient3"

  May  4 20:10:17 vsn-desktop kernel: [   12.637126] type=1505
  audit(1272996615.408:3):  operation="profile_load" pid=631
  name="/usr/lib/NetworkManager/nm-dhcp-client.action"

  May  4 20:10:17 vsn-desktop kernel: [   12.637267] type=1505
  audit(1272996615.408:4):  operation="profile_load" pid=631
  name="/usr/lib/connman/scripts/dhclient-script"

  May  4 20:10:17 vsn-desktop kernel: [   12.641228] type=1505
  audit(1272996615.412:5):  operation="profile_load" pid=658
  name="/usr/sbin/ntpd"

  May  4 20:10:17 vsn-desktop kernel: [   12.699157]   alloc irq_desc
  for 21 on node -1

  May  4 20:10:17 vsn-desktop kernel: [   12.699161]   alloc kstat_irqs
  on node -1

  May  4 20:10:17 vsn-desktop kernel: [   12.699172] CA0106
  0000:02:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21

  May  4 20:10:17 vsn-desktop kernel: [   12.699205] snd-ca0106: Model
  1002 Rev 00000000 Serial 10021102

  May  4 20:10:17 vsn-desktop kernel: [   12.707800] bt878: AUDIO driver
  version 0.0.0 loaded

  May  4 20:10:17 vsn-desktop kernel: [   12.711087] bt878: Bt878 AUDIO
  function found (0).

  May  4 20:10:17 vsn-desktop kernel: [   12.711104] bt878 0000:02:06.1:
  PCI INT A -> GSI 20 (level, low) -> IRQ 20

  May  4 20:10:17 vsn-desktop kernel: [   12.711107] bt878_probe: card
  id=[0x1c11bd],[ Pinnacle PCTV Sat ] has DVB functions.

  May  4 20:10:17 vsn-desktop kernel: [   12.711115] bt878(0): Bt878
  (rev 17) at 02:06.1, irq: 20, latency: 32, memory: 0xfdefe000

  May  4 20:10:17 vsn-desktop kernel: [   12.711139] IRQ 20/bt878:
  IRQF_DISABLED is not guaranteed on shared IRQs

  May  4 20:10:17 vsn-desktop kernel: [   12.737195] DVB: registering
  new adapter (bttv0)

  May  4 20:10:17 vsn-desktop kernel: [   12.757140] DVB: registering
  adapter 1 frontend 0 (Conexant CX24110 DVB-S)...

  May  4 20:10:17 vsn-desktop kernel: [   12.800653] nvidia
  0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

  May  4 20:10:17 vsn-desktop kernel: [   12.800664] nvidia
  0000:01:00.0: setting latency timer to 64

  May  4 20:10:17 vsn-desktop kernel: [   12.800668] vgaarb: device
  changed decodes:
  PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem

  May  4 20:10:17 vsn-desktop kernel: [   12.800994] NVRM: loading
  NVIDIA UNIX x86 Kernel Module  195.36.15  Thu Mar 11 21:41:46 PST 2010

  May  4 20:10:17 vsn-desktop kernel: [   12.807436] Writing to ADC
  failed!

  May  4 20:10:17 vsn-desktop kernel: [   12.810597] Writing to ADC
  failed!

  May  4 20:10:17 vsn-desktop kernel: [   12.813732] DVB: registering
  adapter 0 frontend 0 (DiBcom 7000PC)...

  May  4 20:10:17 vsn-desktop kernel: [   13.022888] DiB0070:
  successfully identified

  May  4 20:10:17 vsn-desktop kernel: [   13.022985] input: IR-receiver
  inside an USB DVB receiver as
  /devices/pci0000:00/0000:00:13.5/usb1/1-10/input/input5

  May  4 20:10:17 vsn-desktop kernel: [   13.023051] dvb-usb: schedule
  remote query interval to 50 msecs.

  May  4 20:10:17 vsn-desktop kernel: [   13.023055] dvb-usb: Terratec
  Cinergy T USB XXS (HD)/ T3 successfully initialized and connected.

  May  4 20:10:17 vsn-desktop kernel: [   13.023285] usbcore: registered
  new interface driver dvb_usb_dib0700

  May  4 20:10:17 vsn-desktop kernel: [   14.670602] EXT4-fs (sda7):
  mounted filesystem with ordered data mode

  May  4 20:10:17 vsn-desktop kernel: [   14.966966] r8169: eth0: link
  up

  May  4 20:10:58 vsn-desktop kernel: [   54.835205] ehci_hcd
  0000:00:13.5: force halt; handhake f8044024 00004000 00000000 -> -110

  May  4 20:10:58 vsn-desktop kernel: [   54.836017] DiB0070 I2C read
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.840013] DiB0070 I2C write
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.848014] DiB0070 I2C read
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.852016] DiB0070 I2C write
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.860019] DiB0070 I2C read
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.864020] DiB0070 I2C write
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.864023] DiB0070 I2C write
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.868013] DiB0070 I2C write
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.868016] DiB0070 I2C write
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.868019] DiB0070 I2C write
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.868022] DiB0070 I2C write
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.868025] DiB0070 I2C write
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.868028] DiB0070 I2C write
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.868030] DiB0070 I2C write
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.876013] DiB0070 I2C read
  failed

  May  4 20:10:58 vsn-desktop kernel: [   54.876016] DiB0070 I2C write
  failed


  And here the stick works well


  May  4 19:26:12 vsn-desktop kernel: [   12.712850] dib0700: loaded
  with support for 13 different device-types

  May  4 19:26:12 vsn-desktop kernel: [   12.713784] dvb-usb: found a
  'Terratec Cinergy T USB XXS (HD)/ T3' in cold state, will try to load
  a firmware

  May  4 19:26:12 vsn-desktop kernel: [   12.713790] usb 1-10: firmware:
  requesting dvb-usb-dib0700-1.20.fw

  May  4 19:26:12 vsn-desktop kernel: [   12.724652] bt878: AUDIO driver
  version 0.0.0 loaded

  May  4 19:26:12 vsn-desktop kernel: [   12.724678] bt878: Bt878 AUDIO
  function found (0).

  May  4 19:26:12 vsn-desktop kernel: [   12.724695] bt878 0000:02:06.1:
  PCI INT A -> GSI 20 (level, low) -> IRQ 20

  May  4 19:26:12 vsn-desktop kernel: [   12.724698] bt878_probe: card
  id=[0x1c11bd],[ Pinnacle PCTV Sat ] has DVB functions.

  May  4 19:26:12 vsn-desktop kernel: [   12.724705] bt878(0): Bt878
  (rev 17) at 02:06.1, irq: 20, latency: 32, memory: 0xfdefe000

  May  4 19:26:12 vsn-desktop kernel: [   12.724719] IRQ 20/bt878:
  IRQF_DISABLED is not guaranteed on shared IRQs

  May  4 19:26:12 vsn-desktop kernel: [   12.731409] DVB: registering
  new adapter (bttv0)

  May  4 19:26:12 vsn-desktop kernel: [   12.734069] gameport: EMU10K1
  is pci0000:02:07.1/gameport0, io 0xde00, speed 320kHz

  May  4 19:26:12 vsn-desktop kernel: [   12.742053] nvidia
  0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

  May  4 19:26:12 vsn-desktop kernel: [   12.742061] nvidia
  0000:01:00.0: setting latency timer to 64

  May  4 19:26:12 vsn-desktop kernel: [   12.742065] vgaarb: device
  changed decodes:
  PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem

  May  4 19:26:12 vsn-desktop kernel: [   12.742653] NVRM: loading
  NVIDIA UNIX x86 Kernel Module  195.36.15  Thu Mar 11 21:41:46 PST 2010

  May  4 19:26:12 vsn-desktop kernel: [   12.744774] DVB: registering
  adapter 0 frontend 0 (Conexant CX24110 DVB-S)...

  May  4 19:26:12 vsn-desktop kernel: [   12.758074] Writing to ADC
  failed!

  May  4 19:26:12 vsn-desktop kernel: [   12.761039] Writing to ADC
  failed!

  May  4 19:26:12 vsn-desktop kernel: [   12.792251] Console: switching
  to colour frame buffer device 80x30

  May  4 19:26:12 vsn-desktop kernel: [   13.018655] EXT4-fs (sda7):
  mounted filesystem with ordered data mode

  May  4 19:26:12 vsn-desktop kernel: [   13.097174] dvb-usb:
  downloading firmware from file 'dvb-usb-dib0700-1.20.fw'

  May  4 19:26:12 vsn-desktop kernel: [   13.302139] dib0700: firmware
  started successfully.

  May  4 19:26:12 vsn-desktop kernel: [   13.805029] dvb-usb: found a
  'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.

  May  4 19:26:12 vsn-desktop kernel: [   13.805084] dvb-usb: will pass
  the complete MPEG2 transport stream to the software demuxer.

  May  4 19:26:12 vsn-desktop kernel: [   13.805360] DVB: registering
  new adapter (Terratec Cinergy T USB XXS (HD)/ T3)

  May  4 19:26:12 vsn-desktop kernel: [   13.914750] type=1505
  audit(1272993972.679:6):  operation="profile_load" pid=817
  name="/usr/share/gdm/guest-session/Xsession"

  May  4 19:26:12 vsn-desktop kernel: [   13.915405] r8169: eth0: link
  up

  May  4 19:26:12 vsn-desktop kernel: [   13.916381] type=1505
  audit(1272993972.683:7):  operation="profile_replace" pid=818
  name="/sbin/dhclient3"

  May  4 19:26:12 vsn-desktop kernel: [   13.916643] type=1505
  audit(1272993972.683:8):  operation="profile_replace" pid=818
  name="/usr/lib/NetworkManager/nm-dhcp-client.action"

  May  4 19:26:12 vsn-desktop kernel: [   13.916832] type=1505
  audit(1272993972.683:9):  operation="profile_replace" pid=818
  name="/usr/lib/connman/scripts/dhclient-script"

  May  4 19:26:12 vsn-desktop kernel: [   13.920649] type=1505
  audit(1272993972.687:10):  operation="profile_load" pid=819
  name="/usr/bin/evince"

  May  4 19:26:12 vsn-desktop kernel: [   13.924124] type=1505
  audit(1272993972.691:11):  operation="profile_load" pid=819
  name="/usr/bin/evince-previewer"

  May  4 19:26:12 vsn-desktop kernel: [   14.017406] DVB: registering
  adapter 1 frontend 0 (DiBcom 7000PC)...

  May  4 19:26:13 vsn-desktop kernel: [   14.240537] DiB0070:
  successfully identified

  May  4 19:26:13 vsn-desktop kernel: [   14.240630] input: IR-receiver
  inside an USB DVB receiver as
  /devices/pci0000:00/0000:00:13.5/usb1/1-10/input/input5

  May  4 19:26:13 vsn-desktop kernel: [   14.240689] dvb-usb: schedule
  remote query interval to 50 msecs.

  May  4 19:26:13 vsn-desktop kernel: [   14.240693] dvb-usb: Terratec
  Cinergy T USB XXS (HD)/ T3 successfully initialized and connected.

  May  4 19:26:13 vsn-desktop kernel: [   14.241297] usbcore: registered
  new interface driver dvb_usb_dib0700



  In the second case the stick was found in cold state, the firmware
  loaded and ONLY THEN the device was found in warm state.

  In the second it was found immediately in warm state. So the firmware
  isn't loaded, what somehow leads to my usb hub not working anymore.
  Then I have to reboot my PC in order to get it working again.


  Regards

  ProblemType: Bug
  DistroRelease: Ubuntu 10.04
  Package: linux-image-2.6.32-22-generic 2.6.32-22.33
  Regression: Yes
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2
  Uname: Linux 2.6.32-22-generic i686
  NonfreeKernelModules: nvidia
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
  Architecture: i386
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  vsn        1441 F.... pulseaudio
  CRDA: Error: [Errno 2] Нет такого файла или каталога
  Card0.Amixer.info:
   Card hw:0 'CA0106'/'AudigyLS [SB0310] at 0xdf00 irq 21'
     Mixer name	: 'CA0106'
     Components	: 'AC97a:83847609'
     Controls      : 35
     Simple ctrls  : 19
  Date: Sat May  8 12:10:20 2010
  HibernationDevice: RESUME=UUID=a0b537c7-32a2-4c02-a6f2-0edd7cd283ff
  InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429)
  IwConfig:
   lo        no wireless extensions.
   
   eth0      no wireless extensions.
  MachineType: Gigabyte Technology Co., Ltd. GA-MA69G-S3H
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=d7aacd69-b169-42ea-94ba-c96f437c1deb ro quiet splash
  ProcEnviron:
   LANGUAGE=de:ru:en
   PATH=(custom, no user)
   LANG=de_DE.utf8
   SHELL=/bin/bash
  RelatedPackageVersions: linux-firmware 1.34
  RfKill:
   
  SourcePackage: linux
  dmi.bios.date: 07/27/2007
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F3
  dmi.board.name: GA-MA69G-S3H
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF3:bd07/27/2007:svnGigabyteTechnologyCo.,Ltd.:pnGA-MA69G-S3H:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-MA69G-S3H:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: GA-MA69G-S3H
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/577377/+subscriptions