← Back to team overview

kernel-packages team mailing list archive

[Bug 1322409] Re: Usb 3.0 device is recognized as usb 2.0 device on usb 3.0 port if the port has been used by usb 3.0 device after booted

 

This bug is awaiting verification that the kernel in -proposed solves
the problem. Please test the kernel and update this bug with the
results. If the problem is solved, change the tag 'verification-needed-
trusty' to 'verification-done-trusty'.

If verification is not done by 5 working days from today, this fix will
be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how
to enable and use -proposed. Thank you!


** Tags added: verification-needed-trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1322409

Title:
  Usb 3.0 device is recognized as usb 2.0 device on usb 3.0 port if the
  port has been used by usb 3.0 device after booted

Status in amd:
  Triaged
Status in HWE Next Project:
  In Progress
Status in “linux” package in Ubuntu:
  In Progress
Status in “linux” source package in Trusty:
  New

Bug description:
  Summary:
  After booted, when using usb 3.0 device first time, it can be recognized as usb 3.0 device correctly.
  But after that, usb 3.0 device are recognized as usb 2.0 device on same port.
  Usb 3.0 device should be "SuperSpeed USB", "high-speed USB device" means usb 2.0 device.

  Information in dmesg:

  [ 86.462345] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
  [ 86.479502] usb 6-1: Parent hub missing LPM exit latency info. Power management will be impacted.
  [ 86.481741] usb 6-1: New USB device found, idVendor=125f, idProduct=312b
  [ 86.481748] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  [ 86.481754] usb 6-1: Product: ADATA USB Flash Drive
  [ 86.481758] usb 6-1: Manufacturer: ADATA
  [ 86.481763] usb 6-1: SerialNumber: 23221115500102A9
  [ 86.542060] Initializing USB Mass Storage driver...
  [ 86.542305] scsi2 : usb-storage 6-1:1.0
  [ 86.542453] usbcore: registered new interface driver usb-storage
  [ 86.542457] USB Mass Storage support registered.
  [ 87.541874] scsi 2:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
  [ 87.542976] sd 2:0:0:0: [sdb] 15433728 512-byte logical blocks: (7.90 GB/7.35 GiB)
  [ 87.543126] sd 2:0:0:0: [sdb] Write Protect is off
  [ 87.543133] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
  [ 87.543281] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
  [ 87.543635] sd 2:0:0:0: Attached scsi generic sg2 type 0
  [ 87.548847] sdb: sdb1 sdb2 sdb3
  [ 87.549916] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  [ 104.344017] WARNING! power/level is deprecated; use power/control instead
  [ 104.498216] usb 6-1: USB disconnect, device number 2
  [ 113.833843] usb 5-1: new high-speed USB device number 3 using xhci_hcd
  [ 113.884757] usb 5-1: New USB device found, idVendor=125f, idProduct=312b
  [ 113.884766] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  [ 113.884772] usb 5-1: Product: ADATA USB Flash Drive
  [ 113.884776] usb 5-1: Manufacturer: ADATA
  [ 113.884781] usb 5-1: SerialNumber: 23221115500102A9
  [ 113.886137] scsi3 : usb-storage 5-1:1.0
  [ 114.886319] scsi 3:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
  [ 114.888157] sd 3:0:0:0: Attached scsi generic sg2 type 0
  [ 114.889087] sd 3:0:0:0: [sdb] 15433728 512-byte logical blocks: (7.90 GB/7.35 GiB)
  [ 114.889289] sd 3:0:0:0: [sdb] Write Protect is off
  [ 114.889302] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
  [ 114.889918] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
  [ 114.895224] sdb: sdb1 sdb2 sdb3
  [ 114.896844] sd 3:0:0:0: [sdb] Attached SCSI removable disk

  Steps:
  1. Boot into system
  2. Connect a usb 3.0 storge device to usb 3.0 port
  3. Disconnect the device
  4. Connect a usb 3.0 storge device(you can use the same device) to same port again

  Expected results: Usb 3.0 device is recognized as usb 3.0 device

  Actual results: Usb 3.0 device is recognized as usb 2.0 device

  Image: stella-yuanli-precise-amd64-20131114-0

  CPU: AMD A4-5000 APU with Radeon(TM) HD Graphics (4x)

  GPU: 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc.
  [AMD/ATI] Kabini [Radeon HD 8330]

  Manufacturer: Hewlett-Packard

  ProductName: HP 14 Notebook PC

  BiosVersion: F.07

To manage notifications about this bug go to:
https://bugs.launchpad.net/amd/+bug/1322409/+subscriptions