← Back to team overview

kernel-packages team mailing list archive

[Bug 1363313] Re: mpt2sas not loaded with LSISAS2008 card in trusty 14.04.1

 

mpt2sas loads in 3.3.7 precise and 3.3.8 quantal kernels.
It does not load in 3.4.1 quantal, nor any thereafter I happened to check.
Chasing down the exact code problem isn't something I'm set up to easily do.
If I can get some help there it would be appreciated.

These are the 3.3.8 messages when it succeeded -
[    3.381754] mpt2sas version 12.100.00.00 loaded
[    3.382155] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (16427124 kB)
[    3.382242] mpt2sas 0000:01:00.0: irq 47 for MSI/MSI-X
[    3.382260] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 47
[    3.382263] mpt2sas0: iomem(0x00000000fbdfc000), mapped(0xffffc900065e0000), size(16384)
[    3.382267] mpt2sas0: ioport(0x000000000000ce00), size(256)
[    3.666443] mpt2sas0: sending diag reset !!
[    4.799390] mpt2sas0: diag reset: SUCCESS
[    4.944914] mpt2sas0: Allocated physical memory: size(3379 kB)
[    4.944918] mpt2sas0: Current Controller Queue Depth(1481), Max Controller Queue Depth(1720)
[    4.944921] mpt2sas0: Scatter Gather Elements per IO(128)
[    5.174963] mpt2sas0: LSISAS2008: FWVersion(17.00.01.00), ChipRevision(0x03), BiosVersion(07.33.00.00)
[    5.174967] mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
[    5.175105] mpt2sas0: sending port enable !!
[    6.697688] mpt2sas0: host_add: handle(0x0001), sas_addr(0x500605b001bdc971), phys(8)
[   12.562718] mpt2sas0: port enable: SUCCESS

and these are the 3.4.1 messages when it failed -
 [    3.249035] mpt2sas version 12.100.00.00 loaded
[    3.249277] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (16426944 kB)
[    3.249335] mpt2sas 0000:01:00.0: irq 46 for MSI/MSI-X
[    3.249352] mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 46
[    3.249355] mpt2sas0: iomem(0x00000000eff40000), mapped(0xffffc900065f8000), size(16384)
[    3.249358] mpt2sas0: ioport(0x000000000000ce00), size(256)
[    3.249385] mpt2sas0: doorbell is in use  (line=3015)
[    3.249387] mpt2sas0: _base_get_ioc_facts: handshake failed (r=-14)
[    3.249390] mpt2sas0: sending diag reset !!
[    3.407606] mpt2sas0: diag reset: FAILED
[    3.407675] mpt2sas0: failure at /home/apw/COD/linux/drivers/scsi/mpt2sas/mpt2sas_scsih.c:8038/_scsih_probe()!



** Changed in: linux (Ubuntu)
       Status: Incomplete => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1363313

Title:
  mpt2sas not loaded with LSISAS2008 card in trusty 14.04.1

Status in “linux” package in Ubuntu:
  Confirmed

Bug description:
  This card has worked without a problem in 12.04 up through the current kernel. After an upgrade to 14.04.1, mpt2sas tries to load during boot but fails. An apport file from this machine is attached; note the error messages during boot.
  --- 
  ApportVersion: 2.14.1-0ubuntu3.3
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  admsvr     3757 F.... pulseaudio
  CurrentDesktop: XFCE
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=7192beea-6a28-4c3f-b274-3332e6d007b7
  InstallationDate: Installed on 2010-09-14 (1445 days ago)
  InstallationMedia: Ubuntu-Server 10.04 LTS "Lucid Lynx" - Release amd64 (20100427)
  IwConfig:
   eth0      no wireless extensions.
   
   lo        no wireless extensions.
  MachineType: Gigabyte Technology Co., Ltd. P55-UD3L
  NonfreeKernelModules: zfs zunicode zavl zcommon znvpair
  Package: linux (not installed)
  ProcFB: 0 VESA VGA
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-35-generic root=UUID=46ac1ed7-062a-4ae3-b071-52ccee0cc346 ro splash nomdmonddf nomdmonisw nomdmonddf nomdmonisw vt.handoff=7
  ProcVersionSignature: Ubuntu 3.13.0-35.62-generic 3.13.11.6
  RelatedPackageVersions:
   linux-restricted-modules-3.13.0-35-generic N/A
   linux-backports-modules-3.13.0-35-generic  N/A
   linux-firmware                             1.127.5
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.13.0-35-generic x86_64
  UpgradeStatus: Upgraded to trusty on 2014-08-23 (6 days ago)
  UserGroups: adm admin cdrom dialout lpadmin lpadmin mythtv plugdev sambashare vboxusers
  _MarkForUpload: True
  dmi.bios.date: 06/23/2010
  dmi.bios.vendor: Award Software International, Inc.
  dmi.bios.version: F7
  dmi.board.name: P55-UD3L
  dmi.board.vendor: Gigabyte Technology Co., Ltd.
  dmi.board.version: x.x
  dmi.chassis.type: 3
  dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
  dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF7:bd06/23/2010:svnGigabyteTechnologyCo.,Ltd.:pnP55-UD3L:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnP55-UD3L:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
  dmi.product.name: P55-UD3L
  dmi.sys.vendor: Gigabyte Technology Co., Ltd.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1363313/+subscriptions


References