kernel-packages team mailing list archive

[Sinisa Radalj <478379@xxxxxxxxxxxxxxxxxx>]

And solution based on mr Ambrosa solution, worked with kernel started
with number 2, more then two years ago.. so sure can work even now!

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/478379

Title:
  Ubuntu does not work with rtl2832u-dvb-t-chip

Status in “linux” package in Ubuntu:
  Incomplete
Status in Baltix GNU/Linux:
  New

Bug description:
  Binary package hint: udev

  Ok, installing the driver of this chip wasn't that easy but following
  several "finnish"-howtos i managed to succesfully build v4l-dvb driver
  for the rtl2832u-chiped MSI Digivox mini II V3.0.

  lsusb:
  Bus 001 Device 005: ID 1d19:1101  

  dmesg (regarded on stick-plugin):
  [   95.620012] usb 1-1: new high speed USB device using ehci_hcd and address 5
  [   95.782039] usb 1-1: configuration #1 chosen from 1 choice
  [   95.788734] dvb-usb: found a 'DK DVBT DONGLE' in warm state.
  [   95.788738] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
  [   95.790373] DVB: registering new adapter (DK DVBT DONGLE)
  [   95.790607] DVB: registering adapter 0 frontend 0 (Realtek RTL2832 DVB-T)...
  [   95.790629] dvb-usb: DK DVBT DONGLE successfully initialized and connected.
  [   95.792426] dvb-usb: found a 'DK DVBT DONGLE' in warm state.
  [   95.792430] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
  [   95.794467] DVB: registering new adapter (DK DVBT DONGLE)
  [   95.794684] DVB: registering adapter 1 frontend 0 (Realtek RTL2832 DVB-T)...
  [   95.794707] dvb-usb: DK DVBT DONGLE successfully initialized and connected.

  scan /usr/share/dvb/dvb-t/de-Nordrhein-Westfalen delivers all channels that i know off.
  example output:

  >>> tune to: 538000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
  0x0000 0x4015: pmt_pid 0x0150 RTL World -- RTL Television (running)
  0x0000 0x4016: pmt_pid 0x0160 RTL World -- RTL2 (running)
  0x0000 0x401b: pmt_pid 0x01b0 RTL World -- Super RTL (running)
  0x0000 0x4022: pmt_pid 0x0220 RTL World -- VOX (running)

  
  kaffeine scans all channels properly too and i can watch everything probably if i tune my antenna up to 18db, but kaffeine is kde based and i would like to have gnome/gtk based me-tv.

  Me-TV cannot find ANY channels (0) when i use internal scan:
  example output:

  08.11.2009 15:15:43: Tuning to transponder at 538000000 Hz
  08.11.2009 15:15:43: Auf Signalsperre warten …               (translation: waiting for signal lock)
  08.11.2009 15:15:55: Poking screensaver
  08.11.2009 15:15:58: Status: 0
  08.11.2009 15:15:58: Currently tuned to freq 538000000, symbol rate 0, inner fec 2
  08.11.2009 15:15:58: Exception: Sperren des Kanals fehlgeschlagen               (translation: failed to lock channel)
  08.11.2009 15:15:58: Failed to tune to transponder at 538000000 Hz

  
  So i tried to import the channels.conf-output that i generated with scan.
  Me-Tv seems to work, adds all channels, but stucks heavily and cannot show tv properly due to weak signal...

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/478379/+subscriptions