kernel-packages team mailing list archive

[Chris Cheney <1348007@xxxxxxxxxxxxxxxxxx>]

I'm seeing what appears to be the same bug on linux 3.17.0-031700rc6
from:

http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.17-rc6-utopic/

Plugging the same devices (HD / wacom tablet) into the on chipset Intel
USB2 controller works fine.

--

[  156.603076] usb 10-2: new high-speed USB device number 2 using xhci_hcd
[  156.719630] usb 10-2: device descriptor read/64, error -71
[  156.823527] xhci_hcd 0000:06:00.0: Setup ERROR: setup context command for slot 1.
[  156.823535] usb 10-2: hub failed to enable device, error -22

--

06:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02) (prog-if 30 [XHCI])
        Subsystem: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at fbafe000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
                Vector table: BAR=0 offset=00001000
                PBA: BAR=0 offset=00001080
        Capabilities: [a0] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 unlimited
                        ClockPM+ Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Not Supported
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
        Capabilities: [150 v1] Latency Tolerance Reporting
                Max snoop latency: 0ns
                Max no snoop latency: 0ns
        Kernel driver in use: xhci_hcd

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1348007

Title:
  xhci_hcd: Setup ERROR: setup context command for slot n.

Status in “linux” package in Ubuntu:
  Triaged

Bug description:
  [24754.899114] usb 3-1: reset high-speed USB device number 4 using xhci_hcd
  [24754.899167] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
  [24754.899174] usb 3-1: hub failed to enable device, error -22
  [24755.010826] usb 3-1: reset high-speed USB device number 4 using xhci_hcd
  [24755.010845] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 3.
  [24755.010850] usb 3-1: hub failed to enable device, error -22
  [24755.122775] usb 3-1: reset high-speed USB device number 4 using xhci_hcd
  [24755.139442] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88004394fac8
  [24755.139451] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88004394fa80
  [24755.139632] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
  [24755.139686] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
  [24755.139929] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
  [24755.140016] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
  [24755.140636] usblp 3-1:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x330F
  [26859.666205] usb 3-1: USB disconnect, device number 4
  [26859.666475] usblp0: removed

  
  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: linux-image-3.16.0-5-generic 3.16.0-5.10
  ProcVersionSignature: Ubuntu 3.16.0-5.10-generic 3.16.0-rc6
  Uname: Linux 3.16.0-5-generic x86_64
  ApportVersion: 2.14.4-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/pcmC1D0p:   caravena   2847 F...m pulseaudio
   /dev/snd/controlC1:  caravena   2847 F.... pulseaudio
   /dev/snd/controlC0:  caravena   2847 F.... pulseaudio
  CurrentDesktop: GNOME
  Date: Wed Jul 23 23:03:41 2014
  HibernationDevice: RESUME=UUID=360bd2d2-4f44-4311-86d6-4781ac81ee87
  InstallationDate: Installed on 2014-04-27 (87 days ago)
  InstallationMedia: Ubuntu-GNOME 14.04 LTS "Trusty Tahr" - Release amd64 (20140416.2)
  MachineType: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-5-generic root=UUID=13144268-2374-4154-83f1-c35d81306190 ro quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-5-generic N/A
   linux-backports-modules-3.16.0-5-generic  N/A
   linux-firmware                            1.132
  SourcePackage: linux
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 04/15/2013
  dmi.bios.vendor: Phoenix Technologies Ltd.
  dmi.bios.version: P14AAJ
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: SAMSUNG_NP1234567890
  dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.board.version: FAB1
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD.
  dmi.chassis.version: 0.1
  dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrP14AAJ:bd04/15/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn530U3C/530U4C:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1:
  dmi.product.name: 530U3C/530U4C
  dmi.product.version: 0.1
  dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1348007/+subscriptions