← Back to team overview

kernel-packages team mailing list archive

[Bug 1376771] Re: DisplayLink Attached Display Adapter and Monitor Not Recognized

 

Alan Stern's Response:


> By the way, Alan. Thank you for looking at that. I'd really like to
> get this working. --drg

Well, I'm not so much looking at this as trying to collect information
that will help the people who do know what to look for.  The standard
information requested by the "Submitting Bugs" form is almost
completely useless for USB-related problems.

> On Wed, Oct 8, 2014 at 2:23 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:
> > lsusb -v

I also asked for the dmesg output.  What does that show?
Okay.  I don't know if Linux supports this or not.  If it does, the
relevant driver is udl.  Is CONFIG_DRM_UDL enabled in your kernel
configuration?

Note that Displaylink has claimed they will add Linux support at some
indefinite time in the future, but they haven't added it yet.  Alan Cox
told you this back on October 6, but apparently you didn't pay
attention to what he or Oliver Neukum wrote.


Information supplied in response to Alan:

I did see that note and link but it was an to a pretty old thread. I
figured something must have happend on this since then. There seem to be
quite a few products with these displaylink chip sets in them.

If its really just a bad product as as far as linux goes could you
recommend other USB to Dual Monitor product that is supported?


CONFIG_DRM_UDL=m

dmesg..

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.17.0-031700rc7-generic (apw@gomeisa) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201409281835 SMP Sun Sep 28 22:36:30 UTC 2014
[    0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-3.17.0-031700rc7-generic root=UUID=5dc9a0a5-84ba-495e-b644-8d11f37bece5 ro rootflags=subvol=@ quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9c08fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c09000-0x00000000da098fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da099000-0x00000000da099fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000da09a000-0x00000000da1b7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da1b8000-0x00000000da64dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da64e000-0x00000000da64efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da64f000-0x00000000da691fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da692000-0x00000000dad8cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dad8d000-0x00000000daff2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daff3000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: System76, Inc. Gazelle Professional/Gazelle Professional, BIOS 4.6.5 05/16/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x41f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask C00000000 write-back
[    0.000000]   1 base 400000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   5 base 41F800000 mask FFF800000 uncachable
[    0.000000]   6 base 41F600000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 16GB, type WB
[    0.000000] reg 1, base: 16GB, range: 512MB, type WB
[    0.000000] reg 2, base: 3584MB, range: 512MB, type UC
[    0.000000] reg 3, base: 3520MB, range: 64MB, type UC
[    0.000000] reg 4, base: 3512MB, range: 8MB, type UC
[    0.000000] reg 5, base: 16888MB, range: 8MB, type UC
[    0.000000] reg 6, base: 16886MB, range: 2MB, type UC
[    0.000000] total RAM covered: 16302M
[    0.000000]  gran_size: 64K chunk_size: 64K num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 64K chunk_size: 128K num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 64K chunk_size: 256K num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 64K chunk_size: 512K num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 64K chunk_size: 1M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 64K chunk_size: 4M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 64K chunk_size: 8M num_reg: 10   lose cover RAM: 246M
[    0.000000] *BAD*gran_size: 64K chunk_size: 16M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 64K chunk_size: 32M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 64K chunk_size: 64M num_reg: 10   lose cover RAM: -8M
[    0.000000]  gran_size: 64K chunk_size: 128M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 64K chunk_size: 256M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 64K chunk_size: 512M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 64K chunk_size: 1G num_reg: 10   lose cover RAM: 0G
[    0.000000] *BAD*gran_size: 64K chunk_size: 2G num_reg: 10   lose cover RAM: -1G
[    0.000000]  gran_size: 128K chunk_size: 128K num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 128K chunk_size: 256K num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 128K chunk_size: 512K num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 128K chunk_size: 1M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 128K chunk_size: 2M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 128K chunk_size: 4M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 128K chunk_size: 8M num_reg: 10   lose cover RAM: 246M
[    0.000000] *BAD*gran_size: 128K chunk_size: 16M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 128K chunk_size: 32M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 128K chunk_size: 64M num_reg: 10   lose cover RAM: -8M
[    0.000000]  gran_size: 128K chunk_size: 128M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 128K chunk_size: 256M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 128K chunk_size: 512M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 128K chunk_size: 1G num_reg: 10   lose cover RAM: 0G
[    0.000000] *BAD*gran_size: 128K chunk_size: 2G num_reg: 10   lose cover RAM: -1G
[    0.000000]  gran_size: 256K chunk_size: 256K num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 256K chunk_size: 512K num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 256K chunk_size: 1M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 256K chunk_size: 2M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 256K chunk_size: 4M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 256K chunk_size: 8M num_reg: 10   lose cover RAM: 246M
[    0.000000] *BAD*gran_size: 256K chunk_size: 16M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 256K chunk_size: 32M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 256K chunk_size: 64M num_reg: 10   lose cover RAM: -8M
[    0.000000]  gran_size: 256K chunk_size: 128M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 256K chunk_size: 256M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 256K chunk_size: 512M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 256K chunk_size: 1G num_reg: 10   lose cover RAM: 0G
[    0.000000] *BAD*gran_size: 256K chunk_size: 2G num_reg: 10   lose cover RAM: -1G
[    0.000000]  gran_size: 512K chunk_size: 512K num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 512K chunk_size: 1M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 512K chunk_size: 2M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 512K chunk_size: 4M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 512K chunk_size: 8M num_reg: 10   lose cover RAM: 246M
[    0.000000] *BAD*gran_size: 512K chunk_size: 16M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 512K chunk_size: 32M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 512K chunk_size: 64M num_reg: 10   lose cover RAM: -8M
[    0.000000]  gran_size: 512K chunk_size: 128M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 512K chunk_size: 256M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 512K chunk_size: 512M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 512K chunk_size: 1G num_reg: 10   lose cover RAM: 0G
[    0.000000] *BAD*gran_size: 512K chunk_size: 2G num_reg: 10   lose cover RAM: -1G
[    0.000000]  gran_size: 1M chunk_size: 1M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 1M chunk_size: 2M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 1M chunk_size: 4M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 1M chunk_size: 8M num_reg: 10   lose cover RAM: 246M
[    0.000000] *BAD*gran_size: 1M chunk_size: 16M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 1M chunk_size: 32M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 1M chunk_size: 64M num_reg: 10   lose cover RAM: -8M
[    0.000000]  gran_size: 1M chunk_size: 128M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 1M chunk_size: 256M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 1M chunk_size: 512M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 1M chunk_size: 1G num_reg: 10   lose cover RAM: 0G
[    0.000000] *BAD*gran_size: 1M chunk_size: 2G num_reg: 10   lose cover RAM: -1G
[    0.000000]  gran_size: 2M chunk_size: 2M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 2M chunk_size: 4M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 2M chunk_size: 8M num_reg: 10   lose cover RAM: 246M
[    0.000000] *BAD*gran_size: 2M chunk_size: 16M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 2M chunk_size: 32M num_reg: 10   lose cover RAM: -8M
[    0.000000] *BAD*gran_size: 2M chunk_size: 64M num_reg: 10   lose cover RAM: -8M
[    0.000000]  gran_size: 2M chunk_size: 128M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 2M chunk_size: 256M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 2M chunk_size: 512M num_reg: 10   lose cover RAM: 0G
[    0.000000]  gran_size: 2M chunk_size: 1G num_reg: 10   lose cover RAM: 0G
[    0.000000] *BAD*gran_size: 2M chunk_size: 2G num_reg: 10   lose cover RAM: -1G
[    0.000000]  gran_size: 4M chunk_size: 4M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 4M chunk_size: 8M num_reg: 10   lose cover RAM: 246M
[    0.000000] *BAD*gran_size: 4M chunk_size: 16M num_reg: 10   lose cover RAM: -6M
[    0.000000] *BAD*gran_size: 4M chunk_size: 32M num_reg: 10   lose cover RAM: -6M
[    0.000000] *BAD*gran_size: 4M chunk_size: 64M num_reg: 10   lose cover RAM: -6M
[    0.000000]  gran_size: 4M chunk_size: 128M num_reg: 10   lose cover RAM: 2M
[    0.000000]  gran_size: 4M chunk_size: 256M num_reg: 10   lose cover RAM: 2M
[    0.000000]  gran_size: 4M chunk_size: 512M num_reg: 10   lose cover RAM: 2M
[    0.000000]  gran_size: 4M chunk_size: 1G num_reg: 10   lose cover RAM: 2M
[    0.000000] *BAD*gran_size: 4M chunk_size: 2G num_reg: 10   lose cover RAM: -1022M
[    0.000000]  gran_size: 8M chunk_size: 8M num_reg: 10   lose cover RAM: 246M
[    0.000000]  gran_size: 8M chunk_size: 16M num_reg: 10   lose cover RAM: 118M
[    0.000000]  gran_size: 8M chunk_size: 32M num_reg: 10   lose cover RAM: 6M
[    0.000000]  gran_size: 8M chunk_size: 64M num_reg: 10   lose cover RAM: 6M
[    0.000000]  gran_size: 8M chunk_size: 128M num_reg: 9   lose cover RAM: 6M
[    0.000000]  gran_size: 8M chunk_size: 256M num_reg: 9   lose cover RAM: 6M
[    0.000000]  gran_size: 8M chunk_size: 512M num_reg: 9   lose cover RAM: 6M
[    0.000000]  gran_size: 8M chunk_size: 1G num_reg: 9   lose cover RAM: 6M
[    0.000000]  gran_size: 8M chunk_size: 2G num_reg: 10   lose cover RAM: 6M
[    0.000000]  gran_size: 16M chunk_size: 16M num_reg: 10   lose cover RAM: 126M
[    0.000000]  gran_size: 16M chunk_size: 32M num_reg: 10   lose cover RAM: 14M
[    0.000000]  gran_size: 16M chunk_size: 64M num_reg: 10   lose cover RAM: 14M
[    0.000000]  gran_size: 16M chunk_size: 128M num_reg: 9   lose cover RAM: 14M
[    0.000000]  gran_size: 16M chunk_size: 256M num_reg: 9   lose cover RAM: 14M
[    0.000000]  gran_size: 16M chunk_size: 512M num_reg: 9   lose cover RAM: 14M
[    0.000000]  gran_size: 16M chunk_size: 1G num_reg: 9   lose cover RAM: 14M
[    0.000000]  gran_size: 16M chunk_size: 2G num_reg: 10   lose cover RAM: 14M
[    0.000000]  gran_size: 32M chunk_size: 32M num_reg: 10   lose cover RAM: 78M
[    0.000000]  gran_size: 32M chunk_size: 64M num_reg: 10   lose cover RAM: 46M
[    0.000000]  gran_size: 32M chunk_size: 128M num_reg: 9   lose cover RAM: 46M
[    0.000000]  gran_size: 32M chunk_size: 256M num_reg: 9   lose cover RAM: 46M
[    0.000000]  gran_size: 32M chunk_size: 512M num_reg: 9   lose cover RAM: 46M
[    0.000000]  gran_size: 32M chunk_size: 1G num_reg: 9   lose cover RAM: 46M
[    0.000000]  gran_size: 32M chunk_size: 2G num_reg: 10   lose cover RAM: 46M
[    0.000000]  gran_size: 64M chunk_size: 64M num_reg: 9   lose cover RAM: 110M
[    0.000000]  gran_size: 64M chunk_size: 128M num_reg: 8   lose cover RAM: 110M
[    0.000000]  gran_size: 64M chunk_size: 256M num_reg: 8   lose cover RAM: 110M
[    0.000000]  gran_size: 64M chunk_size: 512M num_reg: 8   lose cover RAM: 110M
[    0.000000]  gran_size: 64M chunk_size: 1G num_reg: 8   lose cover RAM: 110M
[    0.000000]  gran_size: 64M chunk_size: 2G num_reg: 9   lose cover RAM: 110M
[    0.000000]  gran_size: 128M chunk_size: 128M num_reg: 8   lose cover RAM: 174M
[    0.000000]  gran_size: 128M chunk_size: 256M num_reg: 8   lose cover RAM: 174M
[    0.000000]  gran_size: 128M chunk_size: 512M num_reg: 8   lose cover RAM: 174M
[    0.000000]  gran_size: 128M chunk_size: 1G num_reg: 8   lose cover RAM: 174M
[    0.000000]  gran_size: 128M chunk_size: 2G num_reg: 9   lose cover RAM: 174M
[    0.000000]  gran_size: 256M chunk_size: 256M num_reg: 6   lose cover RAM: 430M
[    0.000000]  gran_size: 256M chunk_size: 512M num_reg: 8   lose cover RAM: 430M
[    0.000000]  gran_size: 256M chunk_size: 1G num_reg: 8   lose cover RAM: 430M
[    0.000000]  gran_size: 256M chunk_size: 2G num_reg: 9   lose cover RAM: 430M
[    0.000000]  gran_size: 512M chunk_size: 512M num_reg: 4   lose cover RAM: 942M
[    0.000000]  gran_size: 512M chunk_size: 1G num_reg: 4   lose cover RAM: 942M
[    0.000000]  gran_size: 512M chunk_size: 2G num_reg: 4   lose cover RAM: 942M
[    0.000000]  gran_size: 1G chunk_size: 1G num_reg: 4   lose cover RAM: 942M
[    0.000000]  gran_size: 1G chunk_size: 2G num_reg: 4   lose cover RAM: 942M
[    0.000000]  gran_size: 2G chunk_size: 2G num_reg: 3   lose cover RAM: 1966M
[    0.000000] mtrr_cleanup: can not find optimal value
[    0.000000] please specify mtrr_gran_size/mtrr_chunk_size
[    0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fc8000, 0x01fc8fff] PGTABLE
[    0.000000] BRK [0x01fc9000, 0x01fc9fff] PGTABLE
[    0.000000] BRK [0x01fca000, 0x01fcafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41f400000-0x41f5fffff]
[    0.000000]  [mem 0x41f400000-0x41f5fffff] page 2M
[    0.000000] BRK [0x01fcb000, 0x01fcbfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x41c000000-0x41f3fffff]
[    0.000000]  [mem 0x41c000000-0x41f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[    0.000000]  [mem 0x400000000-0x41bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01fcc000, 0x01fccfff] PGTABLE
[    0.000000] BRK [0x01fcd000, 0x01fcdfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xd9c08fff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xd9bfffff] page 2M
[    0.000000]  [mem 0xd9c00000-0xd9c08fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xda64e000-0xda64efff]
[    0.000000]  [mem 0xda64e000-0xda64efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xda692000-0xdad8cfff]
[    0.000000]  [mem 0xda692000-0xda7fffff] page 4k
[    0.000000]  [mem 0xda800000-0xdabfffff] page 2M
[    0.000000]  [mem 0xdac00000-0xdad8cfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xdaff3000-0xdaffffff]
[    0.000000]  [mem 0xdaff3000-0xdaffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[    0.000000]  [mem 0x100000000-0x3ffffffff] page 2M
[    0.000000] RAMDISK: [mem 0x359ae000-0x36ccefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DA1A7080 00007C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DA1B1728 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DA1A7190 00A592 (v02 ALASKA A M I    00000020 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DA1B6F80 000040
[    0.000000] ACPI: APIC 0x00000000DA1B1820 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DA1B18B8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DA1B1900 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000DA1B1940 000F92 (v01 TrmRef PtidDevc 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DA1B28D8 00029D (v01 Intel_ AoacTabl 00001000 INTL 20091112)
[    0.000000] ACPI: HPET 0x00000000DA1B2B78 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DA1B2BB0 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DA1B2EC8 0008E4 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DA1B37B0 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: BGRT 0x00000000DA1B4248 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x41f5fffff]
[    0.000000]   NODE_DATA [mem 0x41f5e9000-0x41f5edfff]
[    0.000000]  [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040ec00000-ffff88041ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x41f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xd9c08fff]
[    0.000000]   node   0: [mem 0xda64e000-0xda64efff]
[    0.000000]   node   0: [mem 0xda692000-0xdad8cfff]
[    0.000000]   node   0: [mem 0xdaff3000-0xdaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x41f5fffff]
[    0.000000] On node 0 totalpages: 4167341
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13893 pages used for memmap
[    0.000000]   DMA32 zone: 889105 pages, LIFO batch:31
[    0.000000]   Normal zone: 51160 pages used for memmap
[    0.000000]   Normal zone: 3274240 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd9c09000-0xda098fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda099000-0xda099fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda09a000-0xda1b7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda1b8000-0xda64dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xda64f000-0xda691fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdad8d000-0xdaff2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041f200000 s86720 r8192 d23872 u262144
[    0.000000] pcpu-alloc: s86720 r8192 d23872 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4102203
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-3.17.0-031700rc7-generic root=UUID=5dc9a0a5-84ba-495e-b644-8d11f37bece5 ro rootflags=subvol=@ quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16304036K/16669364K available (7846K kernel code, 1145K rwdata, 3768K rodata, 1376K init, 1308K bss, 365328K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] Offload RCU callbacks from all CPUs
[    0.000000] Offload RCU callbacks from CPUs: 0-7.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:488 0
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 67108864 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.735 MHz processor
[    0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.47 BogoMIPS (lpj=9178940)
[    0.000039] pid_max: default: 32768 minimum: 301
[    0.000046] ACPI: Core revision 20140724
[    0.007749] ACPI: All ACPI Tables successfully acquired
[    0.020243] Security Framework initialized
[    0.020256] AppArmor: AppArmor initialized
[    0.020257] Yama: becoming mindful.
[    0.021375] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.025690] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.027592] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.027612] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.027862] Initializing cgroup subsys memory
[    0.027867] Initializing cgroup subsys devices
[    0.027869] Initializing cgroup subsys freezer
[    0.027871] Initializing cgroup subsys net_cls
[    0.027873] Initializing cgroup subsys blkio
[    0.027875] Initializing cgroup subsys perf_event
[    0.027877] Initializing cgroup subsys net_prio
[    0.027879] Initializing cgroup subsys hugetlb
[    0.027902] CPU: Physical Processor ID: 0
[    0.027903] CPU: Processor Core ID: 0
[    0.027908] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.028294] mce: CPU supports 9 MCE banks
[    0.028307] CPU0: Thermal monitoring enabled (TM1)
[    0.028319] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.028468] Freeing SMP alternatives memory: 28K (ffffffff81e78000 - ffffffff81e7f000)
[    0.029664] ftrace: allocating 32229 entries in 126 pages
[    0.045621] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.085285] smpboot: CPU0: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz (fam: 06, model: 3a, stepping: 09)
[    0.085291] TSC deadline timer enabled
[    0.085316] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[    0.085337] ... version:                3
[    0.085338] ... bit width:              48
[    0.085338] ... generic registers:      4
[    0.085339] ... value mask:             0000ffffffffffff
[    0.085340] ... max period:             0000ffffffffffff
[    0.085341] ... fixed-purpose events:   3
[    0.085342] ... event mask:             000000070000000f
[    0.087022] x86: Booting SMP configuration:
[    0.087024] .... node  #0, CPUs:      #1
[    0.100541] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100628]  #2 #3 #4 #5 #6 #7
[    0.182278] x86: Booted up 1 node, 8 CPUs
[    0.182282] smpboot: Total of 8 processors activated (36715.76 BogoMIPS)
[    0.190208] devtmpfs: initialized
[    0.195766] evm: security.selinux
[    0.195768] evm: security.SMACK64
[    0.195768] evm: security.SMACK64EXEC
[    0.195769] evm: security.SMACK64TRANSMUTE
[    0.195770] evm: security.SMACK64MMAP
[    0.195771] evm: security.ima
[    0.195772] evm: security.capability
[    0.195830] PM: Registering ACPI NVS region [mem 0xda09a000-0xda1b7fff] (1171456 bytes)
[    0.195845] PM: Registering ACPI NVS region [mem 0xda64f000-0xda691fff] (274432 bytes)
[    0.196726] pinctrl core: initialized pinctrl subsystem
[    0.196798] regulator-dummy: no parameters
[    0.196833] RTC time: 18:57:54, date: 10/09/14
[    0.196917] NET: Registered protocol family 16
[    0.197082] cpuidle: using governor ladder
[    0.197085] cpuidle: using governor menu
[    0.197145] ACPI: bus type PCI registered
[    0.197146] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.197215] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.197217] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.197300] PCI: Using configuration type 1 for base access
[    0.202411] ACPI: Added _OSI(Module Device)
[    0.202413] ACPI: Added _OSI(Processor Device)
[    0.202414] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.202415] ACPI: Added _OSI(Processor Aggregator Device)
[    0.205018] ACPI: Executed 1 blocks of module-level executable AML code
[    0.210026] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.210400] ACPI: Dynamic OEM Table Load:
[    0.210407] ACPI: SSDT 0xFFFF880408BD0000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.214197] ACPI: Dynamic OEM Table Load:
[    0.214202] ACPI: SSDT 0xFFFF880408B34C00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.218073] ACPI: Dynamic OEM Table Load:
[    0.218077] ACPI: SSDT 0xFFFF880408B2F200 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    1.054067] ACPI: Interpreter enabled
[    1.054074] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[    1.054079] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[    1.054091] ACPI: (supports S0 S3 S4 S5)
[    1.054093] ACPI: Using IOAPIC for interrupt routing
[    1.054118] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.062347] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    1.062353] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.062553] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    1.062675] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    1.063248] PCI host bridge to bus 0000:00
[    1.063251] pci_bus 0000:00: root bus resource [bus 00-3e]
[    1.063253] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    1.063255] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    1.063256] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    1.063258] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    1.063260] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    1.063261] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    1.063263] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    1.063264] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    1.063266] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    1.063267] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    1.063275] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    1.063362] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    1.063373] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    1.063380] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    1.063384] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    1.063488] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    1.063511] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[    1.063584] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.063627] pci 0000:00:14.0: System wakeup disabled by ACPI
[    1.063668] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    1.063692] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1a000-0xf7e1a00f 64bit]
[    1.063769] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.063858] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    1.063879] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e18000-0xf7e183ff]
[    1.063972] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.064028] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.064070] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    1.064087] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[    1.064165] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.064210] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.064248] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    1.064334] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.064381] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.064421] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    1.064507] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.064553] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    1.064590] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    1.064676] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    1.064722] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    1.064767] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    1.064788] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff]
[    1.064882] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.064936] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.064977] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    1.065155] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    1.065174] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    1.065182] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    1.065189] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    1.065197] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    1.065205] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    1.065213] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e16000-0xf7e167ff]
[    1.065259] pci 0000:00:1f.2: PME# supported from D3hot
[    1.065332] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    1.065347] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit]
[    1.065369] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    1.065510] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.065649] pci 0000:02:00.0: [8086:008a] type 00 class 0x028000
[    1.065713] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit]
[    1.065940] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.066047] pci 0000:02:00.0: System wakeup disabled by ACPI
[    1.074098] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    1.074105] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    1.074282] pci 0000:03:00.0: [10ec:5289] type 00 class 0xff0000
[    1.074353] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff]
[    1.074883] pci 0000:03:00.0: supports D1 D2
[    1.074885] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    1.074985] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.075095] pci 0000:03:00.2: [10ec:8168] type 00 class 0x020000
[    1.075166] pci 0000:03:00.2: reg 0x10: [io  0xe000-0xe0ff]
[    1.075273] pci 0000:03:00.2: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    1.075341] pci 0000:03:00.2: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    1.075657] pci 0000:03:00.2: supports D1 D2
[    1.075659] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    1.075792] pci 0000:03:00.2: System wakeup disabled by ACPI
[    1.082105] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.082110] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    1.082113] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    1.082119] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.082647] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.082694] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.082739] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    1.082782] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.082827] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.082871] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.082915] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.082959] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    1.083561] ACPI: Enabled 5 GPEs in block 00 to 3F
[    1.083594] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.083682] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.083684] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.083686] vgaarb: loaded
[    1.083688] vgaarb: bridge control possible 0000:00:02.0
[    1.083924] SCSI subsystem initialized
[    1.083965] libata version 3.00 loaded.
[    1.083988] ACPI: bus type USB registered
[    1.084004] usbcore: registered new interface driver usbfs
[    1.084012] usbcore: registered new interface driver hub
[    1.084031] usbcore: registered new device driver usb
[    1.084167] PCI: Using ACPI for IRQ routing
[    1.085754] PCI: pci_cache_line_size set to 64 bytes
[    1.085849] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    1.085850] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    1.085852] e820: reserve RAM buffer [mem 0xd9c09000-0xdbffffff]
[    1.085854] e820: reserve RAM buffer [mem 0xda64f000-0xdbffffff]
[    1.085855] e820: reserve RAM buffer [mem 0xdad8d000-0xdbffffff]
[    1.085857] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    1.085858] e820: reserve RAM buffer [mem 0x41f600000-0x41fffffff]
[    1.085964] NetLabel: Initializing
[    1.085966] NetLabel:  domain hash size = 128
[    1.085967] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.085978] NetLabel:  unlabeled traffic allowed by default
[    1.086048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.086054] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.088090] Switched to clocksource hpet
[    1.093352] AppArmor: AppArmor Filesystem Enabled
[    1.093385] pnp: PnP ACPI init
[    1.093474] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.093478] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.093562] system 00:01: [io  0x0680-0x069f] has been reserved
[    1.093565] system 00:01: [io  0x1000-0x100f] has been reserved
[    1.093566] system 00:01: [io  0xffff] has been reserved
[    1.093568] system 00:01: [io  0xffff] has been reserved
[    1.093570] system 00:01: [io  0x0400-0x0453] could not be reserved
[    1.093572] system 00:01: [io  0x0458-0x047f] has been reserved
[    1.093574] system 00:01: [io  0x0500-0x057f] has been reserved
[    1.093575] system 00:01: [io  0x164e-0x164f] has been reserved
[    1.093577] system 00:01: [io  0x3322-0x3323] has been reserved
[    1.093579] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.093608] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.093654] system 00:03: [io  0x0454-0x0457] has been reserved
[    1.093657] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.093682] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.093747] pnp 00:05: Plug and Play ACPI device, IDs ETD0403 PNP0f13 (active)
[    1.093796] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    1.093799] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.094044] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.094046] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.094048] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.094050] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.094052] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.094054] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.094056] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.094057] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.094059] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    1.094061] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.094063] system 00:07: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    1.094065] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.094203] system 00:08: [mem 0x20000000-0x201fffff] has been reserved
[    1.094206] system 00:08: [mem 0x40004000-0x40004fff] has been reserved
[    1.094208] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.094661] pnp: PnP ACPI: found 9 devices
[    1.101095] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.101107] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    1.101112] pci 0000:00:1c.2:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    1.101120] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    1.101123] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    1.101128] pci 0000:00:1c.3:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    1.101132] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.101138] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.101140] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.101142] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.101144] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.101145] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.101147] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.101149] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.101150] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.101152] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.101153] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[    1.101156] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    1.101157] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    1.101159] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    1.101161] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    1.101187] NET: Registered protocol family 2
[    1.101395] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.101638] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.101748] TCP: Hash tables configured (established 131072 bind 65536)
[    1.101762] TCP: reno registered
[    1.101781] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    1.101836] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    1.101915] NET: Registered protocol family 1
[    1.101930] pci 0000:00:02.0: Video device with shadowed ROM
[    1.102407] PCI: CLS 64 bytes, default 64
[    1.102452] Trying to unpack rootfs image as initramfs...
[    1.426402] Freeing initrd memory: 19588K (ffff8800359ae000 - ffff880036ccf000)
[    1.426413] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.426415] software IO TLB [mem 0xd5c09000-0xd9c09000] (64MB) mapped at [ffff8800d5c09000-ffff8800d9c08fff]
[    1.426810] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    1.426859] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[    1.426866] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[    1.426874] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[    1.426882] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[    1.426889] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
[    1.426897] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
[    1.426905] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
[    1.426911] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
[    1.426967] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[    1.426993] Scanning for low memory corruption every 60 seconds
[    1.427333] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.427355] Initialise system trusted keyring
[    1.427376] audit: initializing netlink subsys (disabled)
[    1.427390] audit: type=2000 audit(1412881075.404:1): initialized
[    1.427789] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.429258] zpool: loaded
[    1.429262] zbud: loaded
[    1.429427] VFS: Disk quotas dquot_6.5.2
[    1.429461] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.429896] fuse init (API version 7.23)
[    1.429984] msgmni has been set to 31882
[    1.430044] Key type big_key registered
[    1.430424] Key type asymmetric registered
[    1.430426] Asymmetric key parser 'x509' registered
[    1.430459] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.430508] io scheduler noop registered
[    1.430510] io scheduler deadline registered (default)
[    1.430539] io scheduler cfq registered
[    1.430978] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.430994] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.431041] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    1.431042] vesafb: scrolling: redraw
[    1.431044] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.431060] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005c00000, using 8128k, total 8128k
[    1.584270] Console: switching to colour frame buffer device 240x67
[    1.736851] fb0: VESA VGA frame buffer device
[    1.736876] intel_idle: MWAIT substates: 0x21120
[    1.736877] intel_idle: v0.4 model 0x3A
[    1.736878] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.737236] ACPI: AC Adapter [AC] (on-line)
[    1.737318] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.737322] ACPI: Power Button [PWRB]
[    1.737357] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.737359] ACPI: Sleep Button [SLPB]
[    1.737394] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.737746] ACPI: Lid Switch [LID0]
[    1.737783] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.737785] ACPI: Power Button [PWRF]
[    1.740926] thermal LNXTHERM:00: registered as thermal_zone0
[    1.740929] ACPI: Thermal Zone [TZ0] (39 C)
[    1.740960] GHES: HEST is not enabled!
[    1.741120] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.748154] Linux agpgart interface v0.103
[    1.749564] brd: module loaded
[    1.750563] loop: module loaded
[    1.750875] libphy: Fixed MDIO Bus: probed
[    1.750878] tun: Universal TUN/TAP device driver, 1.6
[    1.750879] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    1.750940] PPP generic driver version 2.4.2
[    1.751005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.751011] ehci-pci: EHCI PCI platform driver
[    1.751157] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.751180] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.751194] ehci-pci 0000:00:1a.0: debug port 2
[    1.751544] ACPI: Battery Slot [BAT0] (battery present)
[    1.755083] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.755099] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e18000
[    1.767758] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.767809] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.767811] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.767813] usb usb1: Product: EHCI Host Controller
[    1.767814] usb usb1: Manufacturer: Linux 3.17.0-031700rc7-generic ehci_hcd
[    1.767816] usb usb1: SerialNumber: 0000:00:1a.0
[    1.767986] hub 1-0:1.0: USB hub found
[    1.767993] hub 1-0:1.0: 2 ports detected
[    1.768170] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.768177] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.768188] ehci-pci 0000:00:1d.0: debug port 2
[    1.772071] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.772082] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e17000
[    1.783764] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.783798] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.783800] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.783801] usb usb2: Product: EHCI Host Controller
[    1.783803] usb usb2: Manufacturer: Linux 3.17.0-031700rc7-generic ehci_hcd
[    1.783804] usb usb2: SerialNumber: 0000:00:1d.0
[    1.783932] hub 2-0:1.0: USB hub found
[    1.783937] hub 2-0:1.0: 2 ports detected
[    1.784028] ehci-platform: EHCI generic platform driver
[    1.784038] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.784042] ohci-pci: OHCI PCI platform driver
[    1.784051] ohci-platform: OHCI generic platform driver
[    1.784059] uhci_hcd: USB Universal Host Controller Interface driver
[    1.784158] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.784162] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.784246] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.784264] xhci_hcd 0000:00:14.0: irq 24 for MSI/MSI-X
[    1.784321] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.784322] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.784324] usb usb3: Product: xHCI Host Controller
[    1.784326] usb usb3: Manufacturer: Linux 3.17.0-031700rc7-generic xhci_hcd
[    1.784327] usb usb3: SerialNumber: 0000:00:14.0
[    1.784454] hub 3-0:1.0: USB hub found
[    1.784463] hub 3-0:1.0: 4 ports detected
[    1.784758] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.784762] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.784803] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.784805] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.784807] usb usb4: Product: xHCI Host Controller
[    1.784808] usb usb4: Manufacturer: Linux 3.17.0-031700rc7-generic xhci_hcd
[    1.784810] usb usb4: SerialNumber: 0000:00:14.0
[    1.784979] hub 4-0:1.0: USB hub found
[    1.784989] hub 4-0:1.0: 4 ports detected
[    1.785358] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:ELNM] at 0x60,0x64 irq 1,12
[    1.789032] i8042: Detected active multiplexing controller, rev 1.1
[    1.791228] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.791233] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.791258] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.791278] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.791298] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.791466] mousedev: PS/2 mouse device common for all mice
[    1.791835] rtc_cmos 00:02: RTC can wake from S4
[    1.791969] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.791995] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.792063] device-mapper: uevent: version 1.0.3
[    1.792133] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
[    1.792150] Intel P-state driver initializing.
[    1.792498] ledtrig-cpu: registered to indicate activity on CPUs
[    1.792706] TCP: cubic registered
[    1.792911] NET: Registered protocol family 10
[    1.793367] NET: Registered protocol family 17
[    1.793390] Key type dns_resolver registered
[    1.794216] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.794285] Loading compiled-in X.509 certificates
[    1.796091] Loaded X.509 cert 'Magrathea: Glacier signing key: 37df6f8932da55afe4bb21797515459d596bd2bc'
[    1.796120] registered taskstats version 1
[    1.797937] Key type trusted registered
[    1.799416] Key type encrypted registered
[    1.800767] AppArmor: AppArmor sha1 policy hashing enabled
[    1.800772] ima: No TPM chip found, activating TPM-bypass!
[    1.800794] evm: HMAC attrs: 0x1
[    1.801229]   Magic number: 2:54:999
[    1.801259] system 00:01: hash matches
[    1.801261]  pnp0: hash matches
[    1.801366] rtc_cmos 00:02: setting system clock to 2014-10-09 18:57:56 UTC (1412881076)
[    1.801458] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.801459] EDD information not available.
[    1.801530] PM: Hibernation image not present or could not be loaded.
[    1.802410] Freeing unused kernel memory: 1376K (ffffffff81d20000 - ffffffff81e78000)
[    1.802411] Write protecting the kernel read-only data: 12288k
[    1.803138] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[    1.803740] Freeing unused kernel memory: 328K (ffff880001bae000 - ffff880001c00000)
[    1.811482] systemd-udevd[143]: starting version 208
[    1.811853] random: systemd-udevd urandom read with 12 bits of entropy available
[    1.827102] rtsx_pci 0000:03:00.0: irq 25 for MSI/MSI-X
[    1.827117] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 25
[    1.827928] ahci 0000:00:1f.2: version 3.0
[    1.828015] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[    1.828031] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.828714] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.828949] r8169 0000:03:00.2: irq 27 for MSI/MSI-X
[    1.829106] r8169 0000:03:00.2 eth0: RTL8411 at 0xffffc90005b92000, 00:90:f5:d8:59:d1, XID 08800800 IRQ 27
[    1.829108] r8169 0000:03:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.843735] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode
[    1.843739] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[    1.860169] scsi host0: ahci
[    1.860272] scsi host1: ahci
[    1.860357] scsi host2: ahci
[    1.860439] scsi host3: ahci
[    1.860521] scsi host4: ahci
[    1.860604] scsi host5: ahci
[    1.860639] ata1: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16100 irq 26
[    1.860640] ata2: DUMMY
[    1.860642] ata3: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16200 irq 26
[    1.860643] ata4: DUMMY
[    1.860645] ata5: SATA max UDMA/133 abar m2048@0xf7e16000 port 0xf7e16300 irq 26
[    1.860646] ata6: DUMMY
[    1.996294] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    2.016788] usb 4-2: New USB device found, idVendor=05e3, idProduct=0612
[    2.016792] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.016794] usb 4-2: Product: USB3.0 Hub
[    2.016795] usb 4-2: Manufacturer: GenesysLogic
[    2.023262] hub 4-2:1.0: USB hub found
[    2.023660] hub 4-2:1.0: 4 ports detected
[    2.175698] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.179642] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.181749] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.181752] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.181754] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.181964] ata1.00: supports DRM functions and may not be fully accessible
[    2.182048] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    2.182051] ata1.00: ATA-9: Samsung SSD 840 EVO 1TB, EXT0BB6Q, max UDMA/133
[    2.182052] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.182405] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.182408] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.182410] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.182586] ata1.00: supports DRM functions and may not be fully accessible
[    2.182641] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    2.182644] ata1.00: configured for UDMA/133
[    2.182817] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  BB6Q PQ: 0 ANSI: 5
[    2.183086] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.183132] sd 0:0:0:0: [sda] Write Protect is off
[    2.183143] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.183157] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.183171] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.183621]  sda: sda1 sda2 < sda5 >
[    2.184064] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.307902] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.307910] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.308291] hub 1-1:1.0: USB hub found
[    2.308364] hub 1-1:1.0: 6 ports detected
[    2.464801] tsc: Refined TSC clocksource calibration: 2294.787 MHz
[    2.499389] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.503206] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208AB, TC00, max UDMA/100
[    2.505599] ata3.00: configured for UDMA/100
[    2.510757] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208AB  TC00 PQ: 0 ANSI: 5
[    2.519414] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[    2.595497] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.595501] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.595734] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.595895] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.725334] psmouse serio2: elantech: assuming hardware version 3 (with firmware version 0x250f01)
[    2.731561] usb 3-2: New USB device found, idVendor=05e3, idProduct=0610
[    2.731563] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.731565] usb 3-2: Product: USB2.0 Hub
[    2.731567] usb 3-2: Manufacturer: GenesysLogic
[    2.736493] hub 3-2:1.0: USB hub found
[    2.741425] hub 3-2:1.0: 4 ports detected
[    2.823078] psmouse serio2: elantech: Synaptics capabilities query result 0x18, 0x17, 0x0b.
[    2.887221] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[    2.919266] ata5: SATA link down (SStatus 0 SControl 300)
[    3.018511] usb 3-4: New USB device found, idVendor=8086, idProduct=0189
[    3.018515] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.131116] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.141811] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio2/input/input10
[    3.199017] raid6: sse2x1    8696 MB/s
[    3.266975] raid6: sse2x2    8394 MB/s
[    3.307336] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    3.307338] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.307621] hub 2-1:1.0: USB hub found
[    3.307708] hub 2-1:1.0: 6 ports detected
[    3.334941] raid6: sse2x4   10930 MB/s
[    3.334943] raid6: using algorithm sse2x4 (10930 MB/s)
[    3.334945] raid6: using ssse3x2 recovery algorithm
[    3.406963] xor: automatically using best checksumming function:
[    3.446883]    avx       : 24379.000 MB/sec
[    3.525388] Switched to clocksource tsc
[    3.534121] Btrfs loaded
[    3.594135] BTRFS: device fsid 5dc9a0a5-84ba-495e-b644-8d11f37bece5 devid 1 transid 12129 /dev/sda1
[    3.617416] BTRFS info (device sda1): disk space caching is enabled
[    3.628131] usb 4-2.3: new SuperSpeed USB device number 3 using xhci_hcd
[    3.631430] BTRFS: detected SSD devices, enabling SSD mode
[    3.643446] usb 4-2.3: New USB device found, idVendor=17e9, idProduct=4318
[    3.643448] usb 4-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.643449] usb 4-2.3: Product: Dell USB 3.0 Dock
[    3.643450] usb 4-2.3: Manufacturer: DisplayLink
[    3.643451] usb 4-2.3: SerialNumber: 30929893
[    3.728986] usb 3-2.4: new high-speed USB device number 4 using xhci_hcd
[    3.820457] usb 3-2.4: New USB device found, idVendor=05e3, idProduct=0610
[    3.820472] usb 3-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.820474] usb 3-2.4: Product: USB2.0 Hub
[    3.821092] hub 3-2.4:1.0: USB hub found
[    3.821402] hub 3-2.4:1.0: 4 ports detected
[    3.894802] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[    4.009053] init: plymouth-upstart-bridge main process (257) terminated with status 1
[    4.009065] init: plymouth-upstart-bridge main process ended, respawning
[    4.010388] init: plymouth-upstart-bridge main process (272) terminated with status 1
[    4.010398] init: plymouth-upstart-bridge main process ended, respawning
[    4.011906] init: plymouth-upstart-bridge main process (274) terminated with status 1
[    4.011918] init: plymouth-upstart-bridge main process ended, respawning
[    4.027163] init: ureadahead main process (260) terminated with status 5
[    4.065823] usb 2-1.6: New USB device found, idVendor=04f2, idProduct=b34c
[    4.065837] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.065838] usb 2-1.6: Product: Chicony USB 2.0 Camera
[    4.065839] usb 2-1.6: Manufacturer: Chicony Electronics Co.,Ltd
[    4.142816] usb 3-2.4.2: new low-speed USB device number 5 using xhci_hcd
[    4.153282] Adding 16667644k swap on /dev/sda5.  Priority:-1 extents:1 across:16667644k SSFS
[    4.169102] BTRFS info (device sda1): disk space caching is enabled
[    4.233690] usb 3-2.4.2: New USB device found, idVendor=192f, idProduct=0416
[    4.233694] usb 3-2.4.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    4.233696] usb 3-2.4.2: Product: USB Optical Mouse
[    4.233812] usb 3-2.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    4.246441] systemd-udevd[426]: starting version 208
[    4.304975] lp: driver loaded but no devices found
[    4.306689] usb 3-2.4.3: new low-speed USB device number 6 using xhci_hcd
[    4.312463] ppdev: user-space parallel port driver
[    4.401883] usb 3-2.4.3: New USB device found, idVendor=04ca, idProduct=0040
[    4.401887] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.401888] usb 3-2.4.3: Product: HP USB Multimedia Keyboard
[    4.401889] usb 3-2.4.3: Manufacturer: LiteOn
[    4.401999] usb 3-2.4.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    4.402002] usb 3-2.4.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    4.435427] init: avahi-cups-reload main process (523) terminated with status 1
[    4.441959] Bluetooth: Core ver 2.19
[    4.441973] NET: Registered protocol family 31
[    4.441974] Bluetooth: HCI device and connection manager initialized
[    4.441980] Bluetooth: HCI socket layer initialized
[    4.441981] Bluetooth: L2CAP socket layer initialized
[    4.441989] Bluetooth: SCO socket layer initialized
[    4.447236] Bluetooth: RFCOMM TTY layer initialized
[    4.447245] Bluetooth: RFCOMM socket layer initialized
[    4.447250] Bluetooth: RFCOMM ver 1.11
[    4.449392] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.449395] Bluetooth: BNEP filters: protocol multicast
[    4.449403] Bluetooth: BNEP socket layer initialized
[    4.451308] audit: type=1400 audit(1412881079.148:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=512 comm="apparmor_parser"
[    4.451312] audit: type=1400 audit(1412881079.148:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=512 comm="apparmor_parser"
[    4.451314] audit: type=1400 audit(1412881079.148:4): apparmor="STATUS" operation="profile_load" name="third_party" pid=512 comm="apparmor_parser"
[    4.455892] mei_me 0000:00:16.0: irq 28 for MSI/MSI-X
[    4.457385] [drm] Initialized drm 1.1.0 20060810
[    4.480587] [drm] Memory usable by graphics device = 2048M
[    4.480590] [drm] Replacing VGA console driver
[    4.480593] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    4.480594] fb: switching to inteldrmfb from VESA VGA
[    4.480609] Console: switching to colour dummy device 80x25
[    4.502438] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[    4.502457] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.502458] [drm] Driver supports precise vblank timestamp query.
[    4.502510] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.970028] audit: type=1400 audit(1412881079.664:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=561 comm="apparmor_parser"
[    4.986067] fbcon: inteldrmfb (fb0) is primary device
[    5.080364] wmi: Mapper loaded
[    5.092938] usbcore: registered new interface driver btusb
[    5.097970] hidraw: raw HID events driver (C) Jiri Kosina
[    5.099494] media: Linux media interface: v0.10
[    5.105463] Linux video capture interface: v2.00
[    5.105640] usb 4-2.3: parse_audio_format_rates_v2(): unable to retrieve number of sample rates (clock 10)
[    5.105790] usb 4-2.3: parse_audio_format_rates_v2(): unable to retrieve number of sample rates (clock 10)
[    5.113302] usbcore: registered new interface driver usbhid
[    5.113303] usbhid: USB HID core driver
[    5.113739] usb 4-2.3: Warning! Unlikely big volume range (=511), cval->res is probably wrong.
[    5.113741] usb 4-2.3: [14] FU [Digital In Playback Volume] ch = 6, val = -8176/0/16
[    5.115121] usb 4-2.3: Warning! Unlikely big volume range (=511), cval->res is probably wrong.
[    5.115123] usb 4-2.3: [11] FU [Dell USB Audio Capture Volume] ch = 2, val = -8176/0/16
[    5.116196] usbcore: registered new interface driver snd-usb-audio
[    5.117073] cdc_ether 4-2.3:1.5 eth1: register 'cdc_ether' at usb-0000:00:14.0-2.3, CDC Ethernet Device, 00:24:9b:0b:60:24
[    5.117165] usbcore: registered new interface driver cdc_ether
[    5.118093] random: nonblocking pool is initialized
[    5.122734] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b34c)
[    5.126844] AVX version of gcm_enc/dec engaged.
[    5.128281] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input13
[    5.129086] usbcore: registered new interface driver uvcvideo
[    5.129087] USB Video Class driver (1.1.1)
[    5.153177] intel_rapl: Found RAPL domain package
[    5.153179] intel_rapl: Found RAPL domain core
[    5.153180] intel_rapl: Found RAPL domain uncore
[    5.166918] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4.2/3-2.4.2:1.0/0003:192F:0416.0001/input/input14
[    5.167785] hid-generic 0003:192F:0416.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-2.4.2/input0
[    5.167924] input: LiteOn HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4.3/3-2.4.3:1.0/0003:04CA:0040.0002/input/input15
[    5.168070] hid-generic 0003:04CA:0040.0002: input,hidraw1: USB HID v1.10 Keyboard [LiteOn HP USB Multimedia Keyboard] on usb-0000:00:14.0-2.4.3/input0
[    5.170300] input: LiteOn HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.4/3-2.4.3/3-2.4.3:1.1/0003:04CA:0040.0003/input/input16
[    5.170466] hid-generic 0003:04CA:0040.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [LiteOn HP USB Multimedia Keyboard] on usb-0000:00:14.0-2.4.3/input1
[    5.276940] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    5.276941] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[    5.714262] Console: switching to colour frame buffer device 240x67
[    5.830801] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.830801] i915 0000:00:02.0: registered panic notifier
[    5.841799] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.845800] acpi device:4d: registered as cooling_device9
[    5.845884] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[    5.845953] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[    5.845984] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.846515] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140724/utaddress-258)
[    5.846516] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.846520] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[    5.846521] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.846523] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[    5.846524] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.846527] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140724/utaddress-258)
[    5.846527] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.846528] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.846667] audit: type=1400 audit(1412881080.544:6): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=674 comm="apparmor_parser"
[    5.846671] audit: type=1400 audit(1412881080.544:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=674 comm="apparmor_parser"
[    5.846673] audit: type=1400 audit(1412881080.544:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=674 comm="apparmor_parser"
[    5.846733] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[    5.864005] cfg80211: Calling CRDA to update world regulatory domain
[    5.865606] sound hdaudioC0D0: autoconfig: line_outs=1 (0x24/0x0/0x0/0x0/0x0) type:speaker
[    5.865607] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.865608] sound hdaudioC0D0:    hp_outs=1 (0x25/0x0/0x0/0x0/0x0)
[    5.865608] sound hdaudioC0D0:    mono: mono_out=0x0
[    5.865609] sound hdaudioC0D0:    inputs:
[    5.865610] sound hdaudioC0D0:      Mic=0x2b
[    5.865611] sound hdaudioC0D0:      Internal Mic=0x29
[    5.870126] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    5.870126] Copyright(c) 2003- 2014 Intel Corporation
[    5.870388] iwlwifi 0000:02:00.0: irq 31 for MSI/MSI-X
[    5.873796] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    5.873910] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    5.874015] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    5.882380] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    5.882810] cfg80211: World regulatory domain updated:
[    5.882812] cfg80211:  DFS Master region: unset
[    5.882812] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    5.882814] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[    5.882815] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[    5.882815] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[    5.882816] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[    5.882816] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[    5.897101] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    5.897102] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    5.897102] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    5.897103] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1030 BGN, REV=0xB0
[    5.897149] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[    5.915599] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    6.275515] init: failsafe main process (727) killed by TERM signal
[    6.371550] audit: type=1400 audit(1412881081.068:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=942 comm="apparmor_parser"
[    6.371556] audit: type=1400 audit(1412881081.068:10): apparmor="STATUS" operation="profile_load" name="chromium" pid=942 comm="apparmor_parser"
[    6.433472] audit_printk_skb: 51 callbacks suppressed
[    6.433476] audit: type=1400 audit(1412881081.132:28): apparmor="STATUS" operation="profile_replace" name="third_party" pid=942 comm="apparmor_parser"
[    6.434949] audit: type=1400 audit(1412881081.132:29): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=942 comm="apparmor_parser"
[    6.436323] audit: type=1400 audit(1412881081.132:30): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=942 comm="apparmor_parser"
[    6.459846] systemd-logind[956]: New seat seat0.
[    6.460140] systemd-logind[956]: Watching system buttons on /dev/input/event3 (Power Button)
[    6.460186] systemd-logind[956]: Watching system buttons on /dev/input/event10 (Video Bus)
[    6.460231] systemd-logind[956]: Watching system buttons on /dev/input/event0 (Power Button)
[    6.460271] systemd-logind[956]: Watching system buttons on /dev/input/event2 (Lid Switch)
[    6.460311] systemd-logind[956]: Watching system buttons on /dev/input/event1 (Sleep Button)
[    6.624009] init: alsa-restore main process (1167) terminated with status 99
[    6.663893] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[    6.670613] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[    6.745595] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[    6.752306] iwlwifi 0000:02:00.0: Radio type=0x2-0x2-0x1
[    6.816768] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.984059] r8169 0000:03:00.2 eth0: link down
[    6.984106] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.026948] systemd-logind[956]: Failed to start unit user@116.service: Unknown unit: user@116.service
[    7.026954] systemd-logind[956]: Failed to start user service: Unknown unit: user@116.service
[    7.029898] systemd-logind[956]: New session c1 of user mysql.
[    7.065519] init: plymouth-upstart-bridge main process ended, respawning
[    7.068278] init: plymouth-upstart-bridge main process (1404) terminated with status 1
[    7.068290] init: plymouth-upstart-bridge main process ended, respawning
[    7.156686] systemd-logind[956]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
[    7.156692] systemd-logind[956]: Failed to start user service: Unknown unit: user@1000.service
[    7.159941] systemd-logind[956]: New session c2 of user gesker.
[    7.159957] systemd-logind[956]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[   13.213919] init: plymouth-stop pre-start process (2699) terminated with status 1
[ 1378.540899] audit: type=1400 audit(1412882452.267:31): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=3591 comm="apparmor_parser"
[ 1378.540911] audit: type=1400 audit(1412882452.267:32): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=3591 comm="apparmor_parser"
[ 1378.549671] audit: type=1400 audit(1412882452.279:33): apparmor="STATUS" operation="profile_replace" name="third_party" pid=3591 comm="apparmor_parser"

On Thu, Oct 9, 2014 at 2:45 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:
> On Thu, 9 Oct 2014, Dennis Gesker wrote:
>
>> By the way, Alan. Thank you for looking at that. I'd really like to
>> get this working. --drg
>
> Well, I'm not so much looking at this as trying to collect information
> that will help the people who do know what to look for.  The standard
> information requested by the "Submitting Bugs" form is almost
> completely useless for USB-related problems.
>
>> On Wed, Oct 8, 2014 at 2:23 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:
>> > lsusb -v
>
> I also asked for the dmesg output.  What does that show?
>
>> Bus 004 Device 003: ID 17e9:4318 DisplayLink
>> Device Descriptor:
>>   bLength                18
>>   bDescriptorType         1
>>   bcdUSB               3.00
>>   bDeviceClass          239 Miscellaneous Device
>>   bDeviceSubClass         2 ?
>>   bDeviceProtocol         1 Interface Association
>>   bMaxPacketSize0         9
>>   idVendor           0x17e9 DisplayLink
>>   idProduct          0x4318
>>   bcdDevice            1.02
>>   iManufacturer           1
>>   iProduct                2
>>   iSerial                 3
>>   bNumConfigurations      1
>>   Configuration Descriptor:
>>     bLength                 9
>>     bDescriptorType         2
>>     wTotalLength          608
>>     bNumInterfaces          7
>>     bConfigurationValue     1
>>     iConfiguration          0
>>     bmAttributes         0xe0
>>       Self Powered
>>       Remote Wakeup
>>     MaxPower                2mA
>
> Okay.  I don't know if Linux supports this or not.  If it does, the
> relevant driver is udl.  Is CONFIG_DRM_UDL enabled in your kernel
> configuration?
>
> Note that Displaylink has claimed they will add Linux support at some
> indefinite time in the future, but they haven't added it yet.  Alan Cox
> told you this back on October 6, but apparently you didn't pay
> attention to what he or Oliver Neukum wrote.
>
> Alan Stern
>

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1376771

Title:
  DisplayLink Attached Display Adapter and Monitor Not Recognized

Status in “linux” package in Ubuntu:
  Triaged

Bug description:
  DisplayLink Plug and Play Universal docking Station
  DELL
  Model: D3000
  MFG: ACP075US
  SN: 1309017059

  All ports on the device are recocognized and function correctly except
  the display adapter.

  Description:	Ubuntu Utopic Unicorn (development branch)
  Release:	14.10

  This problem also exists under trusty. 14.04

  My intention is to drive 2 external monitors with this device.
  This specific device has no issues under Windows 8.1

  ProblemType: Bug
  DistroRelease: Ubuntu 14.10
  Package: linux-image-3.16.0-20-generic 3.16.0-20.27
  ProcVersionSignature: Ubuntu 3.16.0-20.27-generic 3.16.3
  Uname: Linux 3.16.0-20-generic x86_64
  ApportVersion: 2.14.7-0ubuntu2
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  gesker     2140 F.... pulseaudio
  CurrentDesktop: Unity
  Date: Thu Oct  2 08:54:53 2014
  HibernationDevice: RESUME=UUID=8d719d41-d691-447b-8dd0-29bbdd631465
  InstallationDate: Installed on 2014-08-24 (38 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release amd64 (20140722.2)
  MachineType: System76, Inc. Gazelle Professional
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.16.0-20-generic root=UUID=5dc9a0a5-84ba-495e-b644-8d11f37bece5 ro rootflags=subvol=@ quiet splash vt.handoff=7
  RelatedPackageVersions:
   linux-restricted-modules-3.16.0-20-generic N/A
   linux-backports-modules-3.16.0-20-generic  N/A
   linux-firmware                             1.134
  SourcePackage: linux
  UpgradeStatus: Upgraded to utopic on 2014-09-26 (5 days ago)
  dmi.bios.date: 05/16/2012
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 4.6.5
  dmi.board.asset.tag: Tag 12345
  dmi.board.name: Gazelle Professional
  dmi.board.vendor: System76, Inc.
  dmi.board.version: gazp7
  dmi.chassis.asset.tag: No Asset Tag
  dmi.chassis.type: 9
  dmi.chassis.vendor: No Enclosure
  dmi.chassis.version: N/A
  dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr4.6.5:bd05/16/2012:svnSystem76,Inc.:pnGazelleProfessional:pvrgazp7:rvnSystem76,Inc.:rnGazelleProfessional:rvrgazp7:cvnNoEnclosure:ct9:cvrN/A:
  dmi.product.name: Gazelle Professional
  dmi.product.version: gazp7
  dmi.sys.vendor: System76, Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1376771/+subscriptions


References