kernel-packages team mailing list archive

Thread
Date
[Bug 433438] Re: device descriptor read/64, error -110

To: kernel-packages@xxxxxxxxxxxxxxxxxxx
From: pavel <433438@xxxxxxxxxxxxxxxxxx>
Date: Fri, 24 Oct 2014 04:17:33 -0000
Reply-to: Bug 433438 <433438@xxxxxxxxxxxxxxxxxx>
Sender: bounces@xxxxxxxxxxxxx
I'm on Ubuntu 12.04 LTS i686 and this error still occurs sometimes with
Logitech unifying device

[   31.440058] usb 1-4: device descriptor read/64, error -110
[   31.656051] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[   46.768047] usb 1-4: device descriptor read/64, error -110
[   61.984038] usb 1-4: device descriptor read/64, error -110
[   62.200038] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[   72.608032] usb 1-4: device not accepting address 4, error -110
[   72.720038] usb 1-4: new high-speed USB device number 5 using ehci_hcd
[   83.128047] usb 1-4: device not accepting address 5, error -110
[   83.128070] hub 1-0:1.0: unable to enumerate USB device on port 4
[   83.504035] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[   88.504069] uhci_hcd 0000:00:1a.1: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.
[   98.616042] usb 4-2: device descriptor read/64, error -110
[  113.832045] usb 4-2: device descriptor read/64, error -110
[  114.048048] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[  129.168042] usb 4-2: device descriptor read/64, error -110
[  144.384045] usb 4-2: device descriptor read/64, error -110
[  144.600038] usb 4-2: new full-speed USB device number 4 using uhci_hcd
[  155.008031] usb 4-2: device not accepting address 4, error -110
[  155.120030] usb 4-2: new full-speed USB device number 5 using uhci_hcd
[  165.528034] usb 4-2: device not accepting address 5, error -110
[  165.528061] hub 4-0:1.0: unable to enumerate USB device on port 2
[  165.768030] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[  166.032616] usbcore: registered new interface driver usbhid
[  166.032621] usbhid: USB HID core driver
[  166.053559] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input2
[  166.058747] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.2/0003:046D:C52B.0003/input/input13
[  166.058985] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:1d.2-1:

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/433438

Title:
  device descriptor read/64, error -110

Status in The Linux Kernel:
  New
Status in “linux” package in Ubuntu:
  Won't Fix
Status in “linux” source package in Lucid:
  Confirmed

Bug description:
  it's a Gnome 2.26.1  kernel 2.6.28-15-generic  ICH10 family  machine and i got this mesg on start up - i have to wait for my keyboard and mouse about 2 min., just have a look ... dmesg
    
  [    0.380028] usbcore: registered new interface driver usbfs
  [    0.380030] usbcore: registered new interface driver hub
  [    0.380038] usbcore: registered new device driver usb

  [    4.666088] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  [    4.666098] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  [    4.666100] ehci_hcd 0000:00:1a.7: EHCI Host Controller
  [    4.666136] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
  [    4.670043] ehci_hcd 0000:00:1a.7: debug port 1
  [    4.670047] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
  [    4.670055] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
  [    4.684007] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  [    4.684062] usb usb1: configuration #1 chosen from 1 choice
  [    4.684086] hub 1-0:1.0: USB hub found
  [    4.684093] hub 1-0:1.0: 6 ports detected
  [    4.684185] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  [    4.684192] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  [    4.684194] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  [    4.684218] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  [    4.688111] ehci_hcd 0000:00:1d.7: debug port 1
  [    4.688115] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  [    4.688123] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
  [    4.704007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00

  [    4.704063] usb usb2: configuration #1 chosen from 1 choice
  [    4.704091] hub 2-0:1.0: USB hub found
  [    4.704098] hub 2-0:1.0: 6 ports detected
  [    4.704180] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  [    4.704189] uhci_hcd: USB Universal Host Controller Interface driver
  [    4.704200] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  [    4.704204] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  [    4.704206] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  [    4.704230] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  [    4.704247] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
  [    4.704291] usb usb3: configuration #1 chosen from 1 choice
  [    4.704307] hub 3-0:1.0: USB hub found
  [    4.704311] hub 3-0:1.0: 2 ports detected
  [    4.704361] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
  [    4.704365] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  [    4.704367] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  [    4.704390] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  [    4.704414] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
  [    4.704455] usb usb4: configuration #1 chosen from 1 choice
  [    4.704469] hub 4-0:1.0: USB hub found
  [    4.704473] hub 4-0:1.0: 2 ports detected
  [    4.704521] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  [    4.704525] uhci_hcd 0000:00:1a.2: setting latency timer to 64
  [    4.704527] uhci_hcd 0000:00:1a.2: UHCI Host Controller
  [    4.704550] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
  [    4.704567] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
  [    4.704612] usb usb5: configuration #1 chosen from 1 choice
  [    4.704626] hub 5-0:1.0: USB hub found
  [    4.704630] hub 5-0:1.0: 2 ports detected
  [    4.704677] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  [    4.704681] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  [    4.704683] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  [    4.704709] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
  [    4.704726] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
  [    4.704770] usb usb6: configuration #1 chosen from 1 choice
  [    4.704784] hub 6-0:1.0: USB hub found
  [    4.704789] hub 6-0:1.0: 2 ports detected
  [    4.704839] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  [    4.704843] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  [    4.704845] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  [    4.704868] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
  [    4.704885] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
  [    4.704927] usb usb7: configuration #1 chosen from 1 choice
  [    4.704942] hub 7-0:1.0: USB hub found
  [    4.704945] hub 7-0:1.0: 2 ports detected
  [    4.704993] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  [    4.704997] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  [    4.704999] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  [    4.705022] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
  [    4.705039] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
  [    4.705083] usb usb8: configuration #1 chosen from 1 choice
  [    4.705097] hub 8-0:1.0: USB hub found
  [    4.705102] hub 8-0:1.0: 2 ports detected

  [   20.276030] usb 2-3: device descriptor read/64, error -110
  [   35.492048] usb 2-3: device descriptor read/64, error -110
  [   35.708047] usb 2-3: new high speed USB device using ehci_hcd and address 4
  [   50.820040] usb 2-3: device descriptor read/64, error -110

  [   61.381794] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  [   61.381796] Bluetooth: BNEP filters: protocol multicast
  [   61.410111] Bridge firewalling registered
  [   66.036035] usb 2-3: device descriptor read/64, error -110
  [   66.252035] usb 2-3: new high speed USB device using ehci_hcd and address 5
  [   66.500016] Clocksource tsc unstable (delta = -171322583 ns)
  [   71.272063] usb 2-3: device descriptor read/8, error -110
  [   76.392065] usb 2-3: device descriptor read/8, error -110
  [   76.608037] usb 2-3: new high speed USB device using ehci_hcd and address 6
  [   81.628067] usb 2-3: device descriptor read/8, error -110
  [   86.748066] usb 2-3: device descriptor read/8, error -110
  [   86.852045] hub 2-0:1.0: unable to enumerate USB device on port 3
  [   87.284033] usb 6-2: new full speed USB device using uhci_hcd and address 2
  [   87.439063] usb 6-2: config 1 has an invalid descriptor of length 26, skipping remainder of the config
  [   87.439067] usb 6-2: config 1 interface 0 has no altsetting 0
  [   87.466507] usb 6-2: configuration #1 chosen from 1 choice
  [   87.530847] usblp0: USB Bidirectional printer dev 2 if 0 alt 2 proto 2 vid 0x04B4 pid 0x4100
  [   87.530860] usbcore: registered new interface driver usblp
  [   87.712536] usb 7-1: new full speed USB device using uhci_hcd and address 2
  [   88.240237] ppdev: user-space parallel port driver
  [   91.210279] ATL1E 0000:02:00.0: irq 2299 for MSI/MSI-X
  [   91.210405] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
  [   91.210454] ADDRCONF(NETDEV_UP): eth0: link is not ready
  [   91.210572] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  [  101.364047] eth0: no IPv6 routers present
  [  102.824080] usb 7-1: device descriptor read/64, error -110
  [  118.040073] usb 7-1: device descriptor read/64, error -110
  [  118.256069] usb 7-1: new full speed USB device using uhci_hcd and address 3
  [  133.368056] usb 7-1: device descriptor read/64, error -110
  [  148.584063] usb 7-1: device descriptor read/64, error -110
  [  148.800046] usb 7-1: new full speed USB device using uhci_hcd and address 4
  [  153.821896] usb 7-1: device descriptor read/8, error -110
  [  158.941471] usb 7-1: device descriptor read/8, error -110
  [  159.156067] usb 7-1: new full speed USB device using uhci_hcd and address 5
  [  164.178075] usb 7-1: device descriptor read/8, error -110
  [  169.297631] usb 7-1: device descriptor read/8, error -110
  [  169.400105] hub 7-0:1.0: unable to enumerate USB device on port 1
  [  169.648054] usb 8-1: new full speed USB device using uhci_hcd and address 2
  [  169.844421] usb 8-1: configuration #1 chosen from 1 choice
  [  169.883688] Bluetooth: Generic Bluetooth USB driver ver 0.3
  [  169.883749] usbcore: registered new interface driver btusb
  [  170.084052] usb 8-2: new low speed USB device using uhci_hcd and address 3
  [  170.260569] usb 8-2: configuration #1 chosen from 1 choice
  [  170.290565] usbcore: registered new interface driver hiddev
  [  170.290627] usbcore: registered new interface driver usbhid
  [  170.290630] usbhid: v2.6:USB HID core driver

To manage notifications about this bug go to:
https://bugs.launchpad.net/linux/+bug/433438/+subscriptions