kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #88808
[Bug 1386863] RfKill.txt
apport information
** Attachment added: "RfKill.txt"
https://bugs.launchpad.net/bugs/1386863/+attachment/4256257/+files/RfKill.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1386863
Title:
Wireless does not reconnect after modprobe or sleep in Lenovo T440
Ubuntu 14.10, Realtek Semiconductor Co., Ltd. RTL8192EE PCIe Wireless
Network Adapter
Status in “linux” package in Ubuntu:
Incomplete
Bug description:
Hi,
I have installed Ubuntu 14.10 on my new laptop (64 bits) on Oct. 25
and I got my laptop on Oct. 24, 2014, but after running "modprobe -r
r8192ee" command and "modprobe r8192ee", where "r8192ee" is the name
of my wireless module, my wireless connection cannot reconnect to the
internet, even though it finds the wireless networks and tries to
reconnect but it fails. I actually notice this bug after my laptop
went to sleep mode (by closing its lid) and then it was unable to
reconnect to wireless again. The only I can solve it now is by
restarting.
I have tried it with AP at my home which the router is nearby and with
AP at my university which is public. In both cases it happends. I do
not have any other problem with these APs with the other laptop I
have.
The wireless hardware in my laptop (Lenovo T440) was not working at
all in Ubuntu 14.04, I have teseted it in this week, and it was
reported as a confirmed bug. I could not run "upstream's compat-
wireless backports".
Here are the details about it:
uname -a ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Linux mahsa-ThinkPad-T440 3.16.0-23-generic #31-Ubuntu SMP Tue Oct 21 17:56:17 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
lspci -vvxxx ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8192EE PCIe Wireless Network Adapter
Subsystem: Realtek Semiconductor Co., Ltd. Device 001b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 64
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at f0400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8192ee
00: ec 10 8b 81 07 04 10 08 00 00 80 02 10 00 00 00
10: 01 30 00 00 00 00 00 00 04 00 40 f0 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 1b 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 ff 01 00 00
dmesg (After running modprobe -r r8192ee and modprobe r8192ee)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[ 125.586281] wlan0: deauthenticating from f4:7f:35:cc:f6:71 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 125.622205] cfg80211: Calling CRDA to update world regulatory domain
[ 125.630473] cfg80211: World regulatory domain updated:
[ 125.630476] cfg80211: DFS Master region: unset
[ 125.630478] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 125.630480] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 125.630482] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 125.630484] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 125.630485] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 125.630487] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 138.859714] cfg80211: Calling CRDA to update world regulatory domain
[ 138.872238] cfg80211: World regulatory domain updated:
[ 138.872240] cfg80211: DFS Master region: unset
[ 138.872241] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 138.872243] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 138.872244] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 138.872245] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 138.872246] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 138.872247] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 138.878321] r8192ee: module is from the staging directory, the quality is unknown, you have been warned.
[ 138.879407] mem mapped space: start: 0xf0400000 len:00004000 flags:00140204, after map:0xffffc90004ff8000
[ 138.879418] Pci Bridge Vendor is found index: 0
[ 138.879420] pcidev busnumber:devnumber:funcnumber:vendor:link_ctl 3:0:0:10ec:0
[ 138.879421] pci_bridge busnumber:devnumber:funcnumber:vendor:pcie_cap:link_ctl_reg:amd 0:28:1:8086:40:40:0
[ 138.879441] Boot from EFUSE
[ 138.886730] dev_addr: 38:b1:db:00:1b:9b
[ 138.886735] RT Customized ID: 0x12
[ 138.887501] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 138.887743] cfg80211: Calling CRDA for country: EC
[ 138.887777] rtlwifi: wireless switch is on
[ 138.888325] r8192ee 0000:03:00.0: irq 64 for MSI/MSI-X
[ 139.587122] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 139.587167] cfg80211: Regulatory domain changed to country: EC
[ 139.587169] cfg80211: DFS Master region: unset
[ 139.587170] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 139.587172] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 139.587173] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm), (N/A)
[ 139.587175] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm), (0 s)
[ 139.587175] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm), (N/A)
[ 149.723735] wlan0: authenticate with f4:7f:35:dd:e1:c1
[ 150.390674] wlan0: direct probe to f4:7f:35:dd:e1:c1 (try 1/3)
[ 150.593636] wlan0: direct probe to f4:7f:35:dd:e1:c1 (try 2/3)
[ 150.797653] wlan0: direct probe to f4:7f:35:dd:e1:c1 (try 3/3)
[ 151.001675] wlan0: authentication with f4:7f:35:dd:e1:c1 timed out
[ 166.155577] wlan0: authenticate with f4:7f:35:f7:29:d1
[ 166.823724] wlan0: direct probe to f4:7f:35:f7:29:d1 (try 1/3)
[ 167.027908] wlan0: direct probe to f4:7f:35:f7:29:d1 (try 2/3)
[ 167.231945] wlan0: direct probe to f4:7f:35:f7:29:d1 (try 3/3)
[ 167.435952] wlan0: authentication with f4:7f:35:f7:29:d1 timed out
[ 182.580710] wlan0: authenticate with f4:7f:35:f6:9e:d1
[ 183.248770] wlan0: direct probe to f4:7f:35:f6:9e:d1 (try 1/3)
[ 183.450239] wlan0: direct probe to f4:7f:35:f6:9e:d1 (try 2/3)
[ 183.654202] wlan0: direct probe to f4:7f:35:f6:9e:d1 (try 3/3)
[ 183.858252] wlan0: authentication with f4:7f:35:f6:9e:d1 timed out
[ 199.016228] wlan0: authenticate with f4:7f:35:cc:f6:71
[ 199.683511] wlan0: direct probe to f4:7f:35:cc:f6:71 (try 1/3)
[ 199.884523] wlan0: direct probe to f4:7f:35:cc:f6:71 (try 2/3)
[ 200.088554] wlan0: direct probe to f4:7f:35:cc:f6:71 (try 3/3)
[ 200.292604] wlan0: authentication with f4:7f:35:cc:f6:71 timed out
Thank you for your help.
---
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: mahsa 2186 F.... pulseaudio
/dev/snd/controlC1: mahsa 2186 F.... pulseaudio
CRDA:
country EC: DFS-UNSET
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 20), (3, 17)
(5250 - 5330 @ 20), (3, 23), DFS
(5735 - 5835 @ 20), (3, 30)
DistroRelease: Ubuntu 14.10
HibernationDevice: RESUME=UUID=ddd1312b-78c0-4393-949e-8507904afc64
InstallationDate: Installed on 2014-10-26 (13 days ago)
InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release amd64 (20141022.1)
MachineType: LENOVO 20B6CTO1WW
Package: linux (not installed)
ProcEnviron:
LANGUAGE=en_CA:en
TERM=xterm
PATH=(custom, no user)
LANG=en_CA.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-24-generic.efi.signed root=UUID=74eb8dd9-80ed-4d4b-bacd-d0c8e0749a36 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.16.0-24.32-generic 3.16.4
PulseList:
Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied
No PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
linux-restricted-modules-3.16.0-24-generic N/A
linux-backports-modules-3.16.0-24-generic N/A
linux-firmware 1.138
StagingDrivers: r8192ee
Tags: utopic staging
Uname: Linux 3.16.0-24-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:
_MarkForUpload: True
dmi.bios.date: 07/29/2014
dmi.bios.vendor: LENOVO
dmi.bios.version: GJET78WW (2.28 )
dmi.board.asset.tag: Not Available
dmi.board.name: 20B6CTO1WW
dmi.board.vendor: LENOVO
dmi.board.version: SDK0E50512 STD
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: dmi:bvnLENOVO:bvrGJET78WW(2.28):bd07/29/2014:svnLENOVO:pn20B6CTO1WW:pvrThinkPadT440:rvnLENOVO:rn20B6CTO1WW:rvrSDK0E50512STD:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 20B6CTO1WW
dmi.product.version: ThinkPad T440
dmi.sys.vendor: LENOVO
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1386863/+subscriptions
References