kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #91476
[Bug 1395269] Lsusb.txt
apport information
** Attachment added: "Lsusb.txt"
https://bugs.launchpad.net/bugs/1395269/+attachment/4265985/+files/Lsusb.txt
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1395269
Title:
[e1000e] ethtool -t eth0 offline loses routing table
Status in “linux” package in Ubuntu:
Confirmed
Bug description:
ethtool -t eth0 offline does the tests, but leaves the routing table
with only the entry for the local network. I had to sudo route add
default gw 10.0.0.1, in my case. The online test didn't do this.
Ubuntu 14.04, ethtool 1:3.13-1
Linux tesla 3.13.0-39-generic #66-Ubuntu SMP Tue Oct 28 13:30:27 UTC
2014 x86_64 x86_64 x86_64 GNU/Linux
ethtool -i eth0:
driver: e1000e
version: 2.3.2-k
firmware-version: 1.1-0
bus-info: 0000:00:19.0
relevant kernel log:
[637008.472410] e1000e 0000:00:19.0 eth0: offline testing starting
[637009.077985] e1000e 0000:00:19.0 eth0: testing unshared interrupt
[637022.468941] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[637022.572094] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[637022.572257] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[637037.432893] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx
[637037.433003] e1000e 0000:00:19.0 eth0: Link Speed was downgraded by SmartSpeed
[637037.433005] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[637037.433035] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[637037.982611] net_ratelimit: 3 callbacks suppressed
[637037.982623] IPv4: martian source 10.0.0.17 from 80.73.161.44, on dev eth0
[637037.982628] ll header: 00000000: 00 19 d1 11 b4 9b 00 03 6d 11 34 1b 08 00 ........m.4...
(the martian packets are from TCP connections that my router is still
NATing to this machine, even though without its routing table, it's
not happy to see them.)
And yes, my e1000e is autonegotiating to 10baseT/Full on the same
cables and switch that still works at 1000baseT with another machine,
hence running self-tests... I thought this machine used to run at
1000baseT, weird if I went 5 years without noticing my desktop being
slow. Not what this bug report is about, though.
The e1000e hardware is on a DG965WH Intel mobo (ICH8 / g965 graphics, first-gen core2)
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
Subsystem: Intel Corporation Device 0001
Flags: bus master, fast devsel, latency 0, IRQ 45
Memory at e0300000 (32-bit, non-prefetchable) [size=128K]
Memory at e0324000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 20e0 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Kernel driver in use: e1000e
$ ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Full
100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 10Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: on (auto)
Cannot get wake-on-lan settings: Operation not permitted
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
Appears to be the same problem as someone reported to Redhat a while ago, which got marked as fixed for the igb driver
https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=661976
Not very useful info in their BTS, because the bug that it's a dup of is now flagged private, so nobody can even look at it.
Possibly this is a per-driver thing, unless the right fix is to have
ethtool save/restore the routing table entries for that iface.
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: ethtool 1:3.13-1
ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8
Uname: Linux 3.13.0-39-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.5
Architecture: amd64
Date: Sat Nov 22 03:00:35 2014
Dependencies:
gcc-4.9-base 4.9.1-0ubuntu1
libc6 2.19-0ubuntu6.3
libgcc1 1:4.9.1-0ubuntu1
multiarch-support 2.19-0ubuntu6.3
SourcePackage: ethtool
UpgradeStatus: Upgraded to trusty on 2014-07-14 (130 days ago)
---
ApportVersion: 2.14.1-0ubuntu3.5
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: peter 2715 F.... pulseaudio
/dev/snd/pcmC0D0p: peter 2715 F...m pulseaudio
CRDA: Error: [Errno 2] No such file or directory
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=UUID=0da07ae0-ff5a-43c6-9702-519aff370fd5
IwConfig: Error: [Errno 2] No such file or directory
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: root=LABEL=t-root2 ro
ProcVersionSignature: Ubuntu 3.13.0-39.66-generic 3.13.11.8
RelatedPackageVersions:
linux-restricted-modules-3.13.0-39-generic N/A
linux-backports-modules-3.13.0-39-generic N/A
linux-firmware 1.127.4
RfKill: Error: [Errno 2] No such file or directory
Tags: trusty
Uname: Linux 3.13.0-39-generic x86_64
UpgradeStatus: Upgraded to trusty on 2014-07-14 (131 days ago)
UserGroups: adm admin audio cdrom dialout dip floppy fuse lpadmin plugdev sambashare scanner src staff users vboxusers video
_MarkForUpload: True
dmi.bios.date: 11/17/2008
dmi.bios.vendor: Intel Corp.
dmi.bios.version: MQ96510J.86A.1754.2008.1117.0002
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: DG965WH
dmi.board.vendor: Intel Corporation
dmi.board.version: AAD41692-304
dmi.chassis.type: 3
dmi.modalias: dmi:bvnIntelCorp.:bvrMQ96510J.86A.1754.2008.1117.0002:bd11/17/2008:svn:pn:pvr:rvnIntelCorporation:rnDG965WH:rvrAAD41692-304:cvn:ct3:cvr:
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1395269/+subscriptions