← Back to team overview

kernel-packages team mailing list archive

[Bug 1395269] WifiSyslog.txt


apport information

** Attachment added: "WifiSyslog.txt"

** Changed in: linux (Ubuntu)
       Status: Incomplete => Confirmed

You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.

  [e1000e] ethtool -t eth0 offline loses routing table

Status in “linux” package in Ubuntu:

Bug description:
  ethtool -t eth0 offline does the tests, but leaves the routing table
  with only the entry for the local network.  I had to sudo route add
  default gw, in my case.  The online test didn't do this.

  Ubuntu 14.04, ethtool 1:3.13-1

  Linux tesla 3.13.0-39-generic #66-Ubuntu SMP Tue Oct 28 13:30:27 UTC
  2014 x86_64 x86_64 x86_64 GNU/Linux

  ethtool -i eth0: 
  driver: e1000e
  version: 2.3.2-k
  firmware-version: 1.1-0
  bus-info: 0000:00:19.0

  relevant kernel log:
  [637008.472410] e1000e 0000:00:19.0 eth0: offline testing starting
  [637009.077985] e1000e 0000:00:19.0 eth0: testing unshared interrupt
  [637022.468941] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
  [637022.572094] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
  [637022.572257] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [637037.432893] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx
  [637037.433003] e1000e 0000:00:19.0 eth0: Link Speed was downgraded by SmartSpeed
  [637037.433005] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
  [637037.433035] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  [637037.982611] net_ratelimit: 3 callbacks suppressed
  [637037.982623] IPv4: martian source from, on dev eth0
  [637037.982628] ll header: 00000000: 00 19 d1 11 b4 9b 00 03 6d 11 34 1b 08 00        ........m.4...

  (the martian packets are from TCP connections that my router is still
  NATing to this machine, even though without its routing table, it's
  not happy to see them.)

   And yes, my e1000e is autonegotiating to 10baseT/Full on the same
  cables and switch that still works at 1000baseT with another machine,
  hence running self-tests...  I thought this machine used to run at
  1000baseT, weird if I went 5 years without noticing my desktop being
  slow.  Not what this bug report is about, though.

   The e1000e hardware is on a DG965WH Intel mobo (ICH8 / g965 graphics, first-gen core2)
  00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
          Subsystem: Intel Corporation Device 0001
          Flags: bus master, fast devsel, latency 0, IRQ 45
          Memory at e0300000 (32-bit, non-prefetchable) [size=128K]
          Memory at e0324000 (32-bit, non-prefetchable) [size=4K]
          I/O ports at 20e0 [size=32]
          Capabilities: [c8] Power Management version 2
          Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
          Kernel driver in use: e1000e

  $ ethtool eth0
  Settings for eth0:
          Supported ports: [ TP ]
          Supported link modes:   10baseT/Half 10baseT/Full 
                                  100baseT/Half 100baseT/Full 
          Supported pause frame use: No
          Supports auto-negotiation: Yes
          Advertised link modes:  10baseT/Full 
          Advertised pause frame use: No
          Advertised auto-negotiation: Yes
          Speed: 10Mb/s
          Duplex: Full
          Port: Twisted Pair
          PHYAD: 1
          Transceiver: internal
          Auto-negotiation: on
          MDI-X: on (auto)
  Cannot get wake-on-lan settings: Operation not permitted
          Current message level: 0x00000007 (7)
                                 drv probe link
          Link detected: yes

  Appears to be the same problem as someone reported to Redhat a while ago, which got marked as fixed for the igb driver
  Not very useful info in their BTS, because the bug that it's a dup of is now flagged private, so nobody can even look at it.

   Possibly this is a per-driver thing, unless the right fix is to have
  ethtool save/restore the routing table entries for that iface.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: ethtool 1:3.13-1
  ProcVersionSignature: Ubuntu 3.13.0-39.66-generic
  Uname: Linux 3.13.0-39-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
  Date: Sat Nov 22 03:00:35 2014
   gcc-4.9-base 4.9.1-0ubuntu1
   libc6 2.19-0ubuntu6.3
   libgcc1 1:4.9.1-0ubuntu1
   multiarch-support 2.19-0ubuntu6.3
  SourcePackage: ethtool
  UpgradeStatus: Upgraded to trusty on 2014-07-14 (130 days ago)
  ApportVersion: 2.14.1-0ubuntu3.5
  Architecture: amd64
   /dev/snd/controlC0:  peter      2715 F.... pulseaudio
   /dev/snd/pcmC0D0p:   peter      2715 F...m pulseaudio
  CRDA: Error: [Errno 2] No such file or directory
  DistroRelease: Ubuntu 14.04
  HibernationDevice: RESUME=UUID=0da07ae0-ff5a-43c6-9702-519aff370fd5
  IwConfig: Error: [Errno 2] No such file or directory
  Package: linux (not installed)
  ProcFB: 0 inteldrmfb
  ProcKernelCmdLine: root=LABEL=t-root2 ro
  ProcVersionSignature: Ubuntu 3.13.0-39.66-generic
   linux-restricted-modules-3.13.0-39-generic N/A
   linux-backports-modules-3.13.0-39-generic  N/A
   linux-firmware                             1.127.4
  RfKill: Error: [Errno 2] No such file or directory
  Tags:  trusty
  Uname: Linux 3.13.0-39-generic x86_64
  UpgradeStatus: Upgraded to trusty on 2014-07-14 (131 days ago)
  UserGroups: adm admin audio cdrom dialout dip floppy fuse lpadmin plugdev sambashare scanner src staff users vboxusers video
  _MarkForUpload: True
  dmi.bios.date: 11/17/2008
  dmi.bios.vendor: Intel Corp.
  dmi.bios.version: MQ96510J.86A.1754.2008.1117.0002
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: DG965WH
  dmi.board.vendor: Intel Corporation
  dmi.board.version: AAD41692-304
  dmi.chassis.type: 3
  dmi.modalias: dmi:bvnIntelCorp.:bvrMQ96510J.86A.1754.2008.1117.0002:bd11/17/2008:svn:pn:pvr:rvnIntelCorporation:rnDG965WH:rvrAAD41692-304:cvn:ct3:cvr:

To manage notifications about this bug go to: