kernel-packages team mailing list archive

Thread
Date
[Bug 1366418] Re: Bluetooth BCM43142A0 doesn’t work

To: kernel-packages@xxxxxxxxxxxxxxxxxxx
From: ghortor <ghortor_72@xxxxxxxxxxx>
Date: Fri, 16 Jan 2015 21:02:28 -0000
Reply-to: Bug 1366418 <1366418@xxxxxxxxxxxxxxxxxx>
Sender: bounces@xxxxxxxxxxxxx
Unfortunately, the solutions suggested previously on message #4 and #6
don’t work. I’ve tried to do an hex2hcd of the .hex file used by my
windows, then put it in /lib/firmware with the good name and it didn‘t
work at all, bluetooth is still unusable.

For the solution proposed in #6, I don’t really understand how to rename
the .hcd, if the name matters, I might have done an error, but if not,
it simply doesn’t seem to work.

The solution that looked the most promising was to use ndiswrapper on
the windows driver, device seems to be recognized, but still not working
unfortunately.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1366418

Title:
  Bluetooth BCM43142A0 doesn’t work

Status in bluez package in Ubuntu:
  Confirmed

Bug description:
  I’ve installed ubuntu 14.04 and my computer’s builtin bluetooth
  (computer is an Asus x550ln) doesn’t work at all. Bluetooth is not
  displayed in the menu bar, if I open the bluetooth UI and switch on,
  nothing happens and the result of “hcitool dev” is empty.

  I have tried to install the windows driver with ndiswrapper, and the
  bluetooth device seems to be detected as an usb bluetooth device but
  still not working. I then add the device to the bluetooth usb device
  and was able to activate bluetooth in the UI but it does not detect
  any other devices (I’ve tested with a smartphone).

  The driver I have installed can be found in asus page =>
  http://www.asus.com/fr/Notebooks_Ultrabooks/X550LN/HelpDesk_Download/
  Select Windows OS, then “bluetooth” section, take the Broadcom driver
  (should be the first one).

  If you extract this archive, you will find a file named “bcbtums-
  win8x64-brcm.inf” which I installed using the following command:

  ndiswrapper -i bcbtums-win8x64-brcm.inf

  Then, the result of “ndiswrapper -l” is:

  bcbtums-win8x64-brcm : driver installed
  	device (04CA:2006) present

  in usb-devices, I find a device which was not present before
  installation (I might have activated btusb before on this paste):

  T:  Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  3 Spd=12  MxCh= 0
  D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=04ca ProdID=2006 Rev=01.12
  S:  Manufacturer=Broadcom Corp
  S:  Product=BCM43142A0
  S:  SerialNumber=B8EE6593D989
  C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
  I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
  I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
  I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

  then, “echo "04ca 2006" > /sys/bus/usb/drivers/btusb/new_id”, and I
  can switch usb on, but no device will be detected and I’ve found this
  in the dmesg:

  [2200.843126] Bluetooth: hci0 command 0x1003 tx timeout

  which looks pretty much like a “bluetooth not working” message which I
  don’t understand in details.

  I leave here my full dmesg:

  [    0.253889] NetLabel:  domain hash size = 128
  [    0.253890] NetLabel:  protocols = UNLABELED CIPSOv4
  [    0.253901] NetLabel:  unlabeled traffic allowed by default
  [    0.253959] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  [    0.253965] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
  [    0.255995] Switched to clocksource hpet
  [    0.260468] AppArmor: AppArmor Filesystem Enabled
  [    0.260488] pnp: PnP ACPI init
  [    0.260500] ACPI: bus type PNP registered
  [    0.260592] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
  [    0.260596] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
  [    0.260642] pnp 00:01: [dma 4]
  [    0.260658] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
  [    0.260678] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
  [    0.260782] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
  [    0.260924] system 00:04: [io  0x0680-0x069f] has been reserved
  [    0.260927] system 00:04: [io  0xffff] has been reserved
  [    0.260928] system 00:04: [io  0xffff] has been reserved
  [    0.260930] system 00:04: [io  0xffff] has been reserved
  [    0.260932] system 00:04: [io  0x1c00-0x1cfe] has been reserved
  [    0.260934] system 00:04: [io  0x1d00-0x1dfe] has been reserved
  [    0.260935] system 00:04: [io  0x1e00-0x1efe] has been reserved
  [    0.260937] system 00:04: [io  0x1f00-0x1ffe] has been reserved
  [    0.260939] system 00:04: [io  0x1800-0x18fe] could not be reserved
  [    0.260941] system 00:04: [io  0x164e-0x164f] has been reserved
  [    0.260943] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.260969] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
  [    0.261012] system 00:06: [io  0x1854-0x1857] has been reserved
  [    0.261014] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  [    0.261059] system 00:07: [io  0x04d0-0x04d1] has been reserved
  [    0.261061] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.261089] system 00:08: [io  0x0240-0x0259] has been reserved
  [    0.261091] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.261144] pnp 00:09: Plug and Play ACPI device, IDs FLT0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
  [    0.261179] pnp 00:0a: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
  [    0.261509] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.261757] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
  [    0.261759] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
  [    0.261761] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
  [    0.261763] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
  [    0.261765] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
  [    0.261766] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
  [    0.261768] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
  [    0.261770] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
  [    0.261772] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
  [    0.261774] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
  [    0.261776] system 00:0c: [mem 0xf7fdf000-0xf7fdffff] has been reserved
  [    0.261778] system 00:0c: [mem 0xf7fe0000-0xf7feffff] has been reserved
  [    0.261780] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.261857] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
  [    0.262166] pnp: PnP ACPI: found 14 devices
  [    0.262168] ACPI: bus type PNP unregistered
  [    0.268251] pci 0000:00:1c.0: PCI bridge to [bus 01]
  [    0.268263] pci 0000:00:1c.2: PCI bridge to [bus 02]
  [    0.268266] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
  [    0.268270] pci 0000:00:1c.2:   bridge window [mem 0xf7900000-0xf79fffff]
  [    0.268277] pci 0000:00:1c.3: PCI bridge to [bus 03]
  [    0.268282] pci 0000:00:1c.3:   bridge window [mem 0xf7800000-0xf78fffff]
  [    0.268289] pci 0000:00:1c.4: PCI bridge to [bus 04]
  [    0.268291] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
  [    0.268295] pci 0000:00:1c.4:   bridge window [mem 0xf6000000-0xf70fffff]
  [    0.268299] pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
  [    0.268305] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
  [    0.268307] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
  [    0.268308] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
  [    0.268310] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
  [    0.268312] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
  [    0.268313] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
  [    0.268315] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
  [    0.268316] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
  [    0.268318] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
  [    0.268320] pci_bus 0000:02: resource 1 [mem 0xf7900000-0xf79fffff]
  [    0.268322] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
  [    0.268323] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
  [    0.268325] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf70fffff]
  [    0.268327] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
  [    0.268357] NET: Registered protocol family 2
  [    0.268521] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  [    0.268676] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  [    0.268804] TCP: Hash tables configured (established 65536 bind 65536)
  [    0.268821] TCP: reno registered
  [    0.268835] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  [    0.268864] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  [    0.268929] NET: Registered protocol family 1
  [    0.268939] pci 0000:00:02.0: Boot video device
  [    0.269275] PCI: CLS 64 bytes, default 64
  [    0.269328] Trying to unpack rootfs image as initramfs...
  [    0.611379] Freeing initrd memory: 18708K (ffff880035b66000 - ffff880036dab000)
  [    0.611384] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  [    0.611386] software IO TLB [mem 0xb59f8000-0xb99f8000] (64MB) mapped at [ffff8800b59f8000-ffff8800b99f7fff]
  [    0.611562] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
  [    0.611567] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
  [    0.611572] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
  [    0.611579] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
  [    0.611627] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
  [    0.611629] Scanning for low memory corruption every 60 seconds
  [    0.611853] Initialise system trusted keyring
  [    0.611897] audit: initializing netlink socket (disabled)
  [    0.611905] type=2000 audit(1410041999.604:1): initialized
  [    0.642389] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  [    0.643400] zbud: loaded
  [    0.643543] VFS: Disk quotas dquot_6.5.2
  [    0.643579] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  [    0.643954] fuse init (API version 7.22)
  [    0.644018] msgmni has been set to 15732
  [    0.644063] Key type big_key registered
  [    0.644417] Key type asymmetric registered
  [    0.644420] Asymmetric key parser 'x509' registered
  [    0.644456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  [    0.644490] io scheduler noop registered
  [    0.644492] io scheduler deadline registered (default)
  [    0.644516] io scheduler cfq registered
  [    0.644696] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
  [    0.644830] pcieport 0000:00:1c.2: irq 57 for MSI/MSI-X
  [    0.644954] pcieport 0000:00:1c.3: irq 58 for MSI/MSI-X
  [    0.645073] pcieport 0000:00:1c.4: irq 59 for MSI/MSI-X
  [    0.645146] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
  [    0.645150] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
  [    0.645164] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
  [    0.645166] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
  [    0.645167] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
  [    0.645171] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
  [    0.645184] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
  [    0.645186] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
  [    0.645189] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
  [    0.645202] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
  [    0.645204] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
  [    0.645207] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
  [    0.645217] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  [    0.645230] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  [    0.645268] efifb: probing for efifb
  [    0.645720] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90004f00000, using 3072k, total 3072k
  [    0.645722] efifb: mode is 1024x768x32, linelength=4096, pages=1
  [    0.645722] efifb: scrolling: redraw
  [    0.645724] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  [    0.647970] Console: switching to colour frame buffer device 128x48
  [    0.650150] fb0: EFI VGA frame buffer device
  [    0.650166] intel_idle: MWAIT substates: 0x11142120
  [    0.650167] intel_idle: v0.4 model 0x45
  [    0.650168] intel_idle: lapic_timer_reliable_states 0xffffffff
  [    0.650296] ipmi message handler version 39.2
  [    0.660278] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  [    0.660324] ACPI: AC Adapter [AC0] (off-line)
  [    0.660423] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
  [    0.661053] ACPI: Lid Switch [LID]
  [    0.661085] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
  [    0.661090] ACPI: Sleep Button [SLPB]
  [    0.661116] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  [    0.661119] ACPI: Power Button [PWRF]
  [    0.663353] thermal LNXTHERM:00: registered as thermal_zone0
  [    0.663355] ACPI: Thermal Zone [THRM] (29 C)
  [    0.663382] GHES: HEST is not enabled!
  [    0.663459] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  [    0.665226] Linux agpgart interface v0.103
  [    0.666452] brd: module loaded
  [    0.667101] loop: module loaded
  [    0.667396] libphy: Fixed MDIO Bus: probed
  [    0.667469] tun: Universal TUN/TAP device driver, 1.6
  [    0.667470] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
  [    0.667532] PPP generic driver version 2.4.2
  [    0.667588] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  [    0.667592] ehci-pci: EHCI PCI platform driver
  [    0.667698] ehci-pci 0000:00:1d.0: EHCI Host Controller
  [    0.667703] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
  [    0.667716] ehci-pci 0000:00:1d.0: debug port 2
  [    0.671613] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
  [    0.671635] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a23000
  [    0.680324] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
  [    0.680363] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  [    0.680365] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  [    0.680367] usb usb1: Product: EHCI Host Controller
  [    0.680368] usb usb1: Manufacturer: Linux 3.13.0-35-generic ehci_hcd
  [    0.680370] usb usb1: SerialNumber: 0000:00:1d.0
  [    0.681145] hub 1-0:1.0: USB hub found
  [    0.681152] hub 1-0:1.0: 2 ports detected
  [    0.681534] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
  [    0.681540] ACPI: Battery Slot [BAT0] (battery present)
  [    0.681615] ehci-platform: EHCI generic platform driver
  [    0.681622] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  [    0.681623] ohci-pci: OHCI PCI platform driver
  [    0.681631] ohci-platform: OHCI generic platform driver
  [    0.681637] uhci_hcd: USB Universal Host Controller Interface driver
  [    0.681747] xhci_hcd 0000:00:14.0: xHCI Host Controller
  [    0.681752] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
  [    0.681828] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  [    0.681844] xhci_hcd 0000:00:14.0: irq 60 for MSI/MSI-X
  [    0.681897] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  [    0.681898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  [    0.681900] usb usb2: Product: xHCI Host Controller
  [    0.681902] usb usb2: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
  [    0.681903] usb usb2: SerialNumber: 0000:00:14.0
  [    0.682037] hub 2-0:1.0: USB hub found
  [    0.682047] hub 2-0:1.0: 9 ports detected
  [    0.684665] xhci_hcd 0000:00:14.0: xHCI Host Controller
  [    0.684670] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
  [    0.684700] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
  [    0.684702] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  [    0.684703] usb usb3: Product: xHCI Host Controller
  [    0.684705] usb usb3: Manufacturer: Linux 3.13.0-35-generic xhci_hcd
  [    0.684706] usb usb3: SerialNumber: 0000:00:14.0
  [    0.684840] hub 3-0:1.0: USB hub found
  [    0.684848] hub 3-0:1.0: 4 ports detected
  [    0.692403] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  [    0.694807] i8042: Detected active multiplexing controller, rev 1.1
  [    0.696716] serio: i8042 KBD port at 0x60,0x64 irq 1
  [    0.696721] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  [    0.696742] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  [    0.696756] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  [    0.696768] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  [    0.697037] mousedev: PS/2 mouse device common for all mice
  [    0.697330] rtc_cmos 00:05: RTC can wake from S4
  [    0.697466] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
  [    0.697495] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  [    0.697556] device-mapper: uevent: version 1.0.3
  [    0.697615] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
  [    0.697620] ledtrig-cpu: registered to indicate activity on CPUs
  [    0.697622] EFI Variables Facility v0.08 2004-May-17
  [    0.699907] TCP: cubic registered
  [    0.699986] NET: Registered protocol family 10
  [    0.700142] NET: Registered protocol family 17
  [    0.700160] Key type dns_resolver registered
  [    0.700460] Loading compiled-in X.509 certificates
  [    0.701376] Loaded X.509 cert 'Magrathea: Glacier signing key: b1414ae96c1b0ebb7c141fa405c1f6c98e8a66f0'
  [    0.701385] registered taskstats version 1
  [    0.703429] Key type trusted registered
  [    0.705112] Key type encrypted registered
  [    0.706725] AppArmor: AppArmor sha1 policy hashing enabled
  [    0.706728] IMA: No TPM chip found, activating TPM-bypass!
  [    0.707180] regulator-dummy: disabling
  [    0.707235]   Magic number: 14:75:350
  [    0.707331] rtc_cmos 00:05: setting system clock to 2014-09-06 22:19:59 UTC (1410041999)
  [    0.708023] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  [    0.708024] EDD information not available.
  [    0.708061] PM: Hibernation image not present or could not be loaded.
  [    0.708761] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
  [    0.708763] Write protecting the kernel read-only data: 12288k
  [    0.710370] Freeing unused kernel memory: 808K (ffff880002736000 - ffff880002800000)
  [    0.711578] Freeing unused kernel memory: 692K (ffff880002b53000 - ffff880002c00000)
  [    0.722330] systemd-udevd[115]: starting version 204
  [    0.736038] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  [    0.743435] rtsx_pci 0000:02:00.0: irq 61 for MSI/MSI-X
  [    0.743448] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 61
  [    0.745042] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  [    0.745052] r8169 0000:02:00.1: can't disable ASPM; OS doesn't have ASPM control
  [    0.745235] ahci 0000:00:1f.2: version 3.0
  [    0.745315] ahci 0000:00:1f.2: irq 62 for MSI/MSI-X
  [    0.745332] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
  [    0.752730] r8169 0000:02:00.1: irq 63 for MSI/MSI-X
  [    0.752926] r8169 0000:02:00.1 eth0: RTL8411 at 0xffffc90000c8c000, 78:24:af:23:b7:80, XID 1c800800 IRQ 63
  [    0.752929] r8169 0000:02:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
  [    0.760330] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
  [    0.760334] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo only pio slum part deso sadm sds apst 
  [    0.760628] scsi0 : ahci
  [    0.760685] scsi1 : ahci
  [    0.760726] scsi2 : ahci
  [    0.760767] scsi3 : ahci
  [    0.760790] ata1: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22100 irq 62
  [    0.760792] ata2: SATA max UDMA/133 abar m2048@0xf7a22000 port 0xf7a22180 irq 62
  [    0.760793] ata3: DUMMY
  [    0.760794] ata4: DUMMY
  [    0.921079] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input11
  [    0.992540] usb 1-1: new high-speed USB device number 2 using ehci-pci
  [    1.080569] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  [    1.086827] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
  [    1.086832] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  [    1.093148] ata1.00: configured for UDMA/133
  [    1.093355] scsi 0:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 2BA3 PQ: 0 ANSI: 5
  [    1.093519] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  [    1.093523] sd 0:0:0:0: [sda] 4096-byte physical blocks
  [    1.093543] sd 0:0:0:0: Attached scsi generic sg0 type 0
  [    1.093556] sd 0:0:0:0: [sda] Write Protect is off
  [    1.093558] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  [    1.093568] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  [    1.125009] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
  [    1.125013] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  [    1.125276] hub 1-1:1.0: USB hub found
  [    1.125333] hub 1-1:1.0: 8 ports detected
  [    1.149052]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
  [    1.149506] sd 0:0:0:0: [sda] Attached SCSI disk
  [    1.292731] usb 2-5: new high-speed USB device number 2 using xhci_hcd
  [    1.331488] usb 2-5: New USB device found, idVendor=0bda, idProduct=57b4
  [    1.331492] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
  [    1.331494] usb 2-5: Product: USB Camera
  [    1.331496] usb 2-5: Manufacturer: 04081-00051400E5GN23
  [    1.331498] usb 2-5: SerialNumber: 200901010001
  [    1.412773] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [    1.415988] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8FBS, 1.00, max UDMA/100
  [    1.418480] ata2.00: configured for UDMA/100
  [    1.423658] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8FBS   1.00 PQ: 0 ANSI: 5
  [    1.429108] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  [    1.429111] cdrom: Uniform CD-ROM driver Revision: 3.20
  [    1.429251] sr 1:0:0:0: Attached scsi CD-ROM sr0
  [    1.429329] sr 1:0:0:0: Attached scsi generic sg1 type 5
  [    1.444783] usb 2-6: new full-speed USB device number 3 using xhci_hcd
  [    1.462727] usb 2-6: New USB device found, idVendor=04ca, idProduct=2006
  [    1.462730] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  [    1.462732] usb 2-6: Product: BCM43142A0
  [    1.462734] usb 2-6: Manufacturer: Broadcom Corp
  [    1.462735] usb 2-6: SerialNumber: B8EE6593D989
  [    1.487527] mmc0: new SDHC card at address d555
  [    1.489441] mmcblk0: mmc0:d555 SD08G 7.60 GiB 
  [    1.490304]  mmcblk0: p1
  [    1.532836] usb 1-1.3: new low-speed USB device number 3 using ehci-pci
  [    1.608834] tsc: Refined TSC clocksource calibration: 2593.995 MHz
  [    1.629137] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c077
  [    1.629140] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  [    1.629142] usb 1-1.3: Product: USB Optical Mouse
  [    1.629144] usb 1-1.3: Manufacturer: Logitech
  [    1.631803] hidraw: raw HID events driver (C) Jiri Kosina
  [    1.634737] usbcore: registered new interface driver usbhid
  [    1.634741] usbhid: USB HID core driver
  [    1.636075] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input12
  [    1.636171] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.3/input0
  [    2.482144] random: nonblocking pool is initialized
  [    2.490183] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
  [    2.609696] Switched to clocksource tsc
  [    3.804056] init: plymouth-upstart-bridge main process (184) terminated with status 1
  [    3.804066] init: plymouth-upstart-bridge main process ended, respawning
  [    3.805917] init: plymouth-upstart-bridge main process (195) terminated with status 1
  [    3.805930] init: plymouth-upstart-bridge main process ended, respawning
  [    3.807673] init: plymouth-upstart-bridge main process (197) terminated with status 1
  [    3.807682] init: plymouth-upstart-bridge main process ended, respawning
  [    3.809444] init: plymouth-upstart-bridge main process (198) terminated with status 1
  [    3.809452] init: plymouth-upstart-bridge main process ended, respawning
  [    3.810754] init: plymouth-upstart-bridge main process (200) terminated with status 1
  [    3.810762] init: plymouth-upstart-bridge main process ended, respawning
  [    3.812332] init: plymouth-upstart-bridge main process (201) terminated with status 1
  [    3.812343] init: plymouth-upstart-bridge main process ended, respawning
  [    3.813607] init: plymouth-upstart-bridge main process (203) terminated with status 1
  [    3.813614] init: plymouth-upstart-bridge main process ended, respawning
  [    3.815042] init: plymouth-upstart-bridge main process (204) terminated with status 1
  [    3.815049] init: plymouth-upstart-bridge main process ended, respawning
  [    3.816362] init: plymouth-upstart-bridge main process (206) terminated with status 1
  [    3.816368] init: plymouth-upstart-bridge main process ended, respawning
  [    3.817652] init: plymouth-upstart-bridge main process (207) terminated with status 1
  [    3.817661] init: plymouth-upstart-bridge main process ended, respawning
  [    3.819066] init: plymouth-upstart-bridge main process (209) terminated with status 1
  [    3.819074] init: plymouth-upstart-bridge respawning too fast, stopped
  [    5.062186] Adding 19530748k swap on /dev/sda6.  Priority:-1 extents:1 across:19530748k FS
  [    5.990487] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [    6.521541] systemd-udevd[315]: starting version 204
  [    7.894941] lp: driver loaded but no devices found
  [    8.049001] ppdev: user-space parallel port driver
  [    9.854642] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
  [   10.435788] wmi: Mapper loaded
  [   10.558331] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \GPIS 1 (20131115/utaddress-251)
  [   10.558339] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 2 (20131115/utaddress-251)
  [   10.558345] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  [   10.558350] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
  [   10.558354] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
  [   10.558359] ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 3 (20131115/utaddress-251)
  [   10.558363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  [   10.558365] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
  [   10.558369] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GP01 2 (20131115/utaddress-251)
  [   10.558373] ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 3 (20131115/utaddress-251)
  [   10.558377] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
  [   10.558379] lpc_ich: Resource conflict(s) found affecting gpio_ich
  [   10.724754] mei_me 0000:00:16.0: irq 64 for MSI/MSI-X
  [   11.022926] cfg80211: Calling CRDA to update world regulatory domain
  [   11.032464] [drm] Initialized drm 1.1.0 20060810
  [   11.263369] lib80211: common routines for IEEE802.11 drivers
  [   11.263379] lib80211_crypt: registered algorithm 'NULL'
  [   11.431588] wl: module license 'MIXED/Proprietary' taints kernel.
  [   11.431592] Disabling lock debugging due to kernel taint
  [   11.432922] wl: module verification failed: signature and/or  required key missing - tainting kernel
  [   11.462792] INFO @wl_cfg80211_attach : Registered CFG80211 phy
  [   11.688500] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:04:00.0 on minor 0
  [   11.688515] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  331.38  Wed Jan  8 19:32:30 PST 2014
  [   11.712334] [drm] Memory usable by graphics device = 2048M
  [   11.712337] checking generic (d0000000 300000) vs hw (d0000000 10000000)
  [   11.712338] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
  [   11.712361] Console: switching to colour dummy device 80x25
  [   11.763141] i915 0000:00:02.0: irq 65 for MSI/MSI-X
  [   11.763151] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  [   11.763152] [drm] Driver supports precise vblank timestamp query.
  [   11.833640] fbcon: inteldrmfb (fb0) is primary device
  [   11.905043] lib80211_crypt: registered algorithm 'TKIP'
  [   11.939267] asus_wmi: ASUS WMI generic driver loaded
  [   12.007365] wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
  [   12.219319] asus_wmi: Initialization: 0x1
  [   12.219351] asus_wmi: BIOS WMI version: 7.9
  [   12.219379] asus_wmi: SFUN value: 0x4a0877
  [   12.220140] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input13
  [   12.228378] asus_wmi: Backlight controlled by ACPI video driver
  [   12.538414] Linux video capture interface: v2.00
  [   12.655696] intel_rapl: domain uncore energy ctr 1975:1975 not working, skip
  [   12.748048] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b4)
  [   12.754051] input: USB Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input14
  [   12.754124] usbcore: registered new interface driver uvcvideo
  [   12.754125] USB Video Class driver (1.1.1)
  [   12.977835] cfg80211: World regulatory domain updated:
  [   12.977836] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  [   12.977839] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   12.977840] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   12.977841] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  [   12.977843] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   12.977844] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  [   13.433147] type=1400 audit(1410034812.216:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=420 comm="apparmor_parser"
  [   13.433151] type=1400 audit(1410034812.216:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
  [   13.433154] type=1400 audit(1410034812.216:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=420 comm="apparmor_parser"
  [   13.433330] type=1400 audit(1410034812.216:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=419 comm="apparmor_parser"
  [   13.433337] type=1400 audit(1410034812.216:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=419 comm="apparmor_parser"
  [   13.433342] type=1400 audit(1410034812.216:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=419 comm="apparmor_parser"
  [   13.433350] type=1400 audit(1410034812.216:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=498 comm="apparmor_parser"
  [   13.433356] type=1400 audit(1410034812.216:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=498 comm="apparmor_parser"
  [   13.433360] type=1400 audit(1410034812.216:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=498 comm="apparmor_parser"
  [   13.433532] type=1400 audit(1410034812.216:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=420 comm="apparmor_parser"
  [   13.452164] Console: switching to colour frame buffer device 170x48
  [   13.454805] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  [   13.454806] i915 0000:00:02.0: registered panic notifier
  [   13.455184] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
  [   13.469600] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
  [   13.472226] acpi device:23: registered as cooling_device5
  [   13.472261] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input15
  [   13.473408] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
  [   13.476028] acpi device:79: registered as cooling_device6
  [   13.484214] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input16
  [   13.484281] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
  [   13.484448] HDA driver get symbol successfully from i915 module
  [   13.484606] snd_hda_intel 0000:00:1b.0: irq 66 for MSI/MSI-X
  [   13.492149] snd_hda_intel 0000:00:03.0: irq 67 for MSI/MSI-X
  [   13.543995] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
  [   13.544063] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
  [   13.544115] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
  [   13.545270] SKU: Nid=0x1d sku_cfg=0x40479a2d
  [   13.545272] SKU: port_connectivity=0x1
  [   13.545272] SKU: enable_pcbeep=0x0
  [   13.545273] SKU: check_sum=0x00000007
  [   13.545274] SKU: customization=0x0000009a
  [   13.545274] SKU: external_amp=0x5
  [   13.545275] SKU: platform_type=0x1
  [   13.545276] SKU: swap=0x0
  [   13.545276] SKU: override=0x1
  [   13.545486] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
  [   13.545487]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  [   13.545488]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
  [   13.545488]    mono: mono_out=0x0
  [   13.545489]    inputs:
  [   13.545490]      Internal Mic=0x1a
  [   13.545491]      Mic=0x19
  [   13.545492] realtek: No valid SSID, checking pincfg 0x40479a2d for NID 0x1d
  [   13.545493] realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0233
  [   13.552208] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
  [   13.552266] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
  [   13.828436] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
  [   16.301537] init: failsafe main process (677) killed by TERM signal
  [   19.015979] init: avahi-cups-reload main process (775) terminated with status 1
  [   19.103349] Bluetooth: Core ver 2.17
  [   19.103363] NET: Registered protocol family 31
  [   19.103365] Bluetooth: HCI device and connection manager initialized
  [   19.103371] Bluetooth: HCI socket layer initialized
  [   19.103374] Bluetooth: L2CAP socket layer initialized
  [   19.103377] Bluetooth: SCO socket layer initialized
  [   19.129046] audit_printk_skb: 24 callbacks suppressed
  [   19.129049] type=1400 audit(1410034817.908:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=768 comm="apparmor_parser"
  [   19.129055] type=1400 audit(1410034817.908:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=768 comm="apparmor_parser"
  [   19.129413] type=1400 audit(1410034817.908:22): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=768 comm="apparmor_parser"
  [   19.845205] Bluetooth: RFCOMM TTY layer initialized
  [   19.845215] Bluetooth: RFCOMM socket layer initialized
  [   19.845220] Bluetooth: RFCOMM ver 1.11
  [   20.157249] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  [   20.157253] Bluetooth: BNEP filters: protocol multicast
  [   20.157261] Bluetooth: BNEP socket layer initialized
  [   24.470690] type=1400 audit(1410034823.244:23): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=925 comm="apparmor_parser"
  [   24.470696] type=1400 audit(1410034823.244:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=925 comm="apparmor_parser"
  [   24.470699] type=1400 audit(1410034823.244:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=925 comm="apparmor_parser"
  [   24.471568] type=1400 audit(1410034823.248:26): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=925 comm="apparmor_parser"
  [   24.471573] type=1400 audit(1410034823.248:27): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=925 comm="apparmor_parser"
  [   24.471712] type=1400 audit(1410034823.248:28): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=925 comm="apparmor_parser"
  [   24.519246] type=1400 audit(1410034823.296:29): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=929 comm="apparmor_parser"
  [   24.519258] type=1400 audit(1410034823.296:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=885 comm="apparmor_parser"
  [   24.522201] type=1400 audit(1410034823.296:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=930 comm="apparmor_parser"
  [   24.522206] type=1400 audit(1410034823.296:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=930 comm="apparmor_parser"
  [   25.201408] r8169 0000:02:00.1 eth0: link down
  [   25.201449] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [   25.201678] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  [   28.319507] bbswitch: version 0.7
  [   28.319515] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
  [   28.319523] bbswitch: Found discrete VGA device 0000:04:00.0: \_SB_.PCI0.RP05.PEGP
  [   28.319532] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   28.319608] bbswitch: detected an Optimus _DSM function
  [   28.319617] bbswitch: Succesfully loaded. Discrete card 0000:04:00.0 is on
  [   34.593422] vgaarb: this pci device is not a vga device
  [   34.664276] nvidia 0000:04:00.0: irq 68 for MSI/MSI-X
  [   34.670798] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670840] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670865] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670888] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670910] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670933] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670967] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   34.670990] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   35.066389] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
  [   35.397175] vgaarb: this pci device is not a vga device
  [   71.644481] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  [  527.975488] systemd-hostnamed[2991]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
  [ 1841.644295] usbcore: registered new interface driver btusb
  [ 2200.843126] Bluetooth: hci0 command 0x1003 tx timeout

  
  And the usb-devices result command when enabling ndiswrapper bcbtums driver:

  T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
  D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  P:  Vendor=1d6b ProdID=0002 Rev=03.13
  S:  Manufacturer=Linux 3.13.0-35-generic ehci_hcd
  S:  Product=EHCI Host Controller
  S:  SerialNumber=0000:00:1d.0
  C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

  T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 8
  D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=8087 ProdID=8000 Rev=00.04
  C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

  T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#=  3 Spd=1.5 MxCh= 0
  D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
  P:  Vendor=046d ProdID=c077 Rev=72.00
  S:  Manufacturer=Logitech
  S:  Product=USB Optical Mouse
  C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid

  T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 9
  D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=1d6b ProdID=0002 Rev=03.13
  S:  Manufacturer=Linux 3.13.0-35-generic xhci_hcd
  S:  Product=xHCI Host Controller
  S:  SerialNumber=0000:00:14.0
  C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

  T:  Bus=02 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
  D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=0bda ProdID=57b4 Rev=00.12
  S:  Manufacturer=04081-00051400E5GN23
  S:  Product=USB Camera
  S:  SerialNumber=200901010001
  C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
  I:  If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo

  T:  Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  3 Spd=12  MxCh= 0
  D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
  P:  Vendor=04ca ProdID=2006 Rev=01.12
  S:  Manufacturer=Broadcom Corp
  S:  Product=BCM43142A0
  S:  SerialNumber=B8EE6593D989
  C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
  I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
  I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
  I:  If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

  T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 4
  D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
  P:  Vendor=1d6b ProdID=0003 Rev=03.13
  S:  Manufacturer=Linux 3.13.0-35-generic xhci_hcd
  S:  Product=xHCI Host Controller
  S:  SerialNumber=0000:00:14.0
  C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

  If a solution can be found… :-)

  I tried some solutions I’ve found on the web, but nothing seems to
  work, my best hope was here
  https://forums.openmandriva.org/en/discussion/421/driver-for-wireless-
  bcm43142a0-solved but didn’t work for me. Moreover, I feel like this
  device is more a wifi device than a bluetooth device, but my wifi
  device works fine ! Is it possible that a wifi device is used for
  bluetooth ? I know so less about all that…

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1366418/+subscriptions
References

[Bug 1366418] [NEW] Bluetooth BCM43142A0 doesn’t work
From: ghortor, 2014-09-06