kicad-developers team mailing list archive

[Garth Corral <gcorral@xxxxxxxxx>]

Yeah, not shipped with OS X.  It would be something that was built.  Presuming that the new build configured exactly like the old build it would be interesting to see.


Garth


> On Feb 22, 2015, at 3:48 PM, Adam Wolf <adamwolf@xxxxxxxxxxxxxxxxxxxx> wrote:
> 
> Interesting.  Is this something that comes with OS X?  If not, I installed it with brew.  I can uninstall it and reinstall it, and capture that log.
> 
> Let me know.
> 
> Adam Wolf
> 
> On Feb 22, 2015 5:47 PM, "Garth Corral" <gcorral@xxxxxxxxx <mailto:gcorral@xxxxxxxxx>> wrote:
> 
> More interesting would be the build log for pixman which, according to the attached log, is coming from /usr/local/lib.
> 
> Garth
> 
>> On Feb 22, 2015, at 3:31 PM, Adam Wolf <adamwolf@xxxxxxxxxxxxxxxxxxxx <mailto:adamwolf@xxxxxxxxxxxxxxxxxxxx>> wrote:
>> 
>> The builds are being done on a Mac Mini.
>> 
>>       Model Name: Mac mini
>>       Model Identifier: Macmini6,1
>>       Processor Name: Intel Core i5
>>       Processor Speed: 2.5 GHz
>>       Number of Processors: 1
>>       Total Number of Cores: 2
>>       L2 Cache (per Core): 256 KB
>>       L3 Cache: 3 MB
>>       Memory: 16 GB
>> 
>> The official Mac name for it is "Mac Mini (late 2012)".
>> 
>> Attached is the full build log from Jenkins.  Note, I cleanly rebuild *everything* every time, including wx and boost and everything, so the log is quite long.
>> 
>> Adam Wolf
>> Cofounder and Engineer
>> W&L
>> 
>> On Sun, Feb 22, 2015 at 4:13 PM, Bernhard Stegmaier <stegmaier@xxxxxxxxxxxxx <mailto:stegmaier@xxxxxxxxxxxxx>> wrote:
>> Sounds reasonable… from a quick look into the source pixman seems to check for MMX/SSE2/SSE3 and some non-x86 things during configure.
>> 
>> Maybe the same problem here:
>>   https://bugs.launchpad.net/kicad/+bug/1424406 <https://bugs.launchpad.net/kicad/+bug/1424406>
>> 
>> @Adam:
>> What is your build machine/cluster?
>> 
>> 
>> Regards,
>> Bernhard
>> 
>>> On 22 Feb 2015, at 21:12, Garth Corral <gcorral@xxxxxxxxx <mailto:gcorral@xxxxxxxxx>> wrote:
>>> 
>>> I can only speculate, but by the looks of that stack, I’m going to guess that somewhere in the pixman rendering code there is conditionally compiled instruction extensions, such as SSE*, that your cpu does not support.  The nightly builds probably compile this in based on some configuration test, and your builds do not.
>>> 
>>> What is the cpu type and age of your system?
>>> 
>>> 
>>> Garth
>>> 
>>> 
>>>> On Feb 22, 2015, at 11:14 AM, Bernhard Stegmaier <stegmaier@xxxxxxxxxxxxx <mailto:stegmaier@xxxxxxxxxxxxx>> wrote:
>>>> 
>>>> Hi,
>>>> 
>>>> OK, didn’t get that.
>>>> From my side there is really not much more to help.
>>>> 
>>>> The only thing that I could imagine is if Wayne could do a Debug-Build for you and then you could check if you still get that crash and if there is some other information we could get from that.
>>>> 
>>>> The bundle is self contained, so apart from the system libraries (which should be the same on each 10.10.2) there is in theory nothing on your machine that should break it.
>>>> 
>>>> What machine is it?
>>>> Something special about it that could cause pixman to crash on start?
>>>> Did you have any special pixman version/configuration with your build?
>>>> 
>>>> 
>>>> Regards,
>>>> Bernhard
>>>> 
>>>>> On 22.02.2015, at 20:06, Johannes Maibaum <jmaibaum@xxxxxxxxx <mailto:jmaibaum@xxxxxxxxx>> wrote:
>>>>> 
>>>>> Hi Bernard,
>>>>> 
>>>>> sorry, I wasn't clear enough, I think. The version information I provided with my last email was *not* from the nightlies. It was from a working built on my machine, e.g. a build that does *not* crash.
>>>>> 
>>>>> I thought to provide this information a starting point for further analysis of the crash with the nightly which is of course built with Boost 1.54, and from r5441.
>>>>> 
>>>>> 
>>>>> Best,
>>>>> 
>>>>> Johannes
>>>>> 
>>>>>> Am 22.02.2015 um 19:22 schrieb Bernhard Stegmaier <stegmaier@xxxxxxxxxxxxx <mailto:stegmaier@xxxxxxxxxxxxx>>:
>>>>>> 
>>>>>> … I also was too fast with my response, adding list again…
>>>>>> 
>>>>>>> On 22.02.2015, at 19:21, Bernhard Stegmaier <stegmaier@xxxxxxxxxxxxx <mailto:stegmaier@xxxxxxxxxxxxx>> wrote:
>>>>>>> 
>>>>>>> Hi Johannes,
>>>>>>> 
>>>>>>> it is lib-pixmap what seems to be crashing, but that is weird.
>>>>>>> I found some similar reports of crashes with Mozilla/Firefox/etc., but none of them with a root-cause or more information.
>>>>>>> 
>>>>>>> However, something *is* wrong:
>>>>>>>> Boost version: 1.57.0
>>>>>>> 
>>>>>>> Adam’s build doesn’t use 1.57, but 1.54 currently being built with KiCad…
>>>>>>> 
>>>>>>> And also the build version is not what Adam built:
>>>>>>>> Version: (2015-02-06 BZR 5410)-product Release build
>>>>>>> 
>>>>>>> So, whatever you are running, it doesn’t seem to be the downloaded nightly?
>>>>>>> 
>>>>>>> 
>>>>>>> Regards,
>>>>>>> Bernhard
>>>>>>> 
>>>>>>> 
>>>>>>>> On 22.02.2015, at 19:20, Johannes Maibaum <jmaibaum@xxxxxxxxx <mailto:jmaibaum@xxxxxxxxx>> wrote:
>>>>>>>> 
>>>>>>>> Hi Bernhard,
>>>>>>>> 
>>>>>>>> the crash happens both when starting pcbnew standalone, and when starting pcbnew or the footprint editor from the main Kicad app. Unfortunately, I don't have another Mac to cross check. On my 10.10.2 machine, it crashes every time.
>>>>>>>> 
>>>>>>>> I did however check my latest own build again, which has no problems with either pcbnew or the footprint editor. It was built two weeks ago, from r5410, and with python scripting enabled. I don't know if this does help you, but here is the version information string for this working build:
>>>>>>>> 
>>>>>>>> Application: kicad
>>>>>>>> Version: (2015-02-06 BZR 5410)-product Release build
>>>>>>>> wxWidgets: Version 3.0.2 (debug,UTF-8,compiler with C++ ABI 1002,GCC 4.2.1,STL containers,compatible with 2.8)
>>>>>>>> Platform: Mac OS X (Darwin 14.1.0 x86_64), 64 bit, Little endian, wxMac
>>>>>>>> Boost version: 1.57.0
>>>>>>>>    USE_WX_GRAPHICS_CONTEXT=OFF
>>>>>>>>    USE_WX_OVERLAY=ON
>>>>>>>>    KICAD_SCRIPTING=ON
>>>>>>>>    KICAD_SCRIPTING_MODULES=ON
>>>>>>>>    KICAD_SCRIPTING_WXPYTHON=ON
>>>>>>>>    USE_FP_LIB_TABLE=HARD_CODED_ON
>>>>>>>>    BUILD_GITHUB_PLUGIN=ON
>>>>>>>>    KICAD_USE_WEBKIT=OFF
>>>>>>>> 
>>>>>>>> 
>>>>>>>> Best,
>>>>>>>> 
>>>>>>>> Johannes
>>>>>>>> 
>>>>>>>>> Am 22.02.2015 um 18:12 schrieb Bernhard Stegmaier <stegmaier@xxxxxxxxxxxxx <mailto:stegmaier@xxxxxxxxxxxxx>>:
>>>>>>>>> 
>>>>>>>>> Hi,
>>>>>>>>> 
>>>>>>>>> does it crash only for standalone pcbnew, or also for that being launched via KiCad launcher, or both?
>>>>>>>>> I justed checked on both my 10.10.1 and 10.10.2 machines and don’t have any problems.
>>>>>>>>> 
>>>>>>>>> The only thing I just noticed is that pcbnew can’t load a file via KiCad launcher if started from a path with a space in it (e.g., /Volumes/My Disk/KiCad…) … but yours seems to be completely another story.
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> Regards
>>>>>>>>> Bernhard
>>>>>>>>> 
>>>>>>>>>> On 22 Feb 2015, at 14:05, Johannes Maibaum <jmaibaum@xxxxxxxxx <mailto:jmaibaum@xxxxxxxxx>> wrote:
>>>>>>>>>> 
>>>>>>>>>> Hi Adam,
>>>>>>>>>> 
>>>>>>>>>> first, I'd like to thank you, Wayne and Layne, and of course all the other OSX devs for finally bringing "official" OSX builds back to the Kicad main page, great work! This is an amazing improvement for all OSX folks.
>>>>>>>>>> 
>>>>>>>>>> But, testing the latest of the nightly builds, PCBNew and the Footprint editor both crash on startup on my machine (crash log for PCBNew is attached). All other apps work fine.
>>>>>>>>>> 
>>>>>>>>>> Before installing the nightly, I uninstalled my own build of Kicad, and I am pretty sure to having wiped every Kicad file relating to my build (including all the library folders). But perhaps I have missed something.
>>>>>>>>>> 
>>>>>>>>>> I can provide you with more information if you tell me what to do.
>>>>>>>>>> 
>>>>>>>>>> 
>>>>>>>>>> Cheers,
>>>>>>>>>> Johannes
>>>>>>>>>> 
>>>>>>>>>> <PCBNew-crashlog-OSX-nightly-Feb-22.txt>
>>>>>>>>>> 
>>>>>>>>>>> Am 21.02.2015 um 18:29 schrieb Adam Wolf <adamwolf@xxxxxxxxxxxxxxxxxxxx <mailto:adamwolf@xxxxxxxxxxxxxxxxxxxx>>:
>>>>>>>>>>> 
>>>>>>>>>>> Hi folks,
>>>>>>>>>>> 
>>>>>>>>>>> You can find the latest OS X nightlies at http://downloads.kicad-pcb.org/osx/ <http://downloads.kicad-pcb.org/osx/>, and Nick linked it from http://downloads.kicad-pcb.org/osx/ <http://downloads.kicad-pcb.org/osx/>.
>>>>>>>>>>> 
>>>>>>>>>>> There's plenty of work still left to do for me on Kicad, but I am excited to cross this one off the list.
>>>>>>>>>>> 
>>>>>>>>>>> I'll be idling on the IRC channel more actively to help support users with this.
>>>>>>>>>>> 
>>>>>>>>>>> I'll be announcing on the Kicad user list shortly.
>>>>>>>>>>> 
>>>>>>>>>>> Thanks everyone!  Even though this was a lot of work from us at Wayne and Layne, what we did was only a drop in the bucket compared to what has already been done by the dev team and the OS X devs!
>>>>>>>>>>> 
>>>>>>>>>>> Adam Wolf
>>>>>>>>>>> Cofounder and Engineer
>>>>>>>>>>> W&L
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Mailing list: https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>>>>>>>>> Post to     : kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>>>>>>>>>>> Unsubscribe : https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>>>>>>>>> More help   : https://help.launchpad.net/ListHelp <https://help.launchpad.net/ListHelp>
>>>>>>>>>> 
>>>>>>>>>> _______________________________________________
>>>>>>>>>> Mailing list: https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>>>>>>>> Post to     : kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>>>>>>>>>> Unsubscribe : https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>>>>>>>> More help   : https://help.launchpad.net/ListHelp <https://help.launchpad.net/ListHelp>
>>>>>>>>> 
>>>>>>>> 
>>>>>>> 
>>>>>> 
>>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Mailing list: https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>> Post to     : kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>>>> Unsubscribe : https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>> More help   : https://help.launchpad.net/ListHelp <https://help.launchpad.net/ListHelp>
>>> 
>> 
>> 
>> _______________________________________________
>> Mailing list: https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>> Post to     : kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> Unsubscribe : https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>> More help   : https://help.launchpad.net/ListHelp <https://help.launchpad.net/ListHelp>
>> 
>> 
>> <consoleText.txt.zip>_______________________________________________
>> Mailing list: https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>> Post to     : kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> Unsubscribe : https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>> More help   : https://help.launchpad.net/ListHelp <https://help.launchpad.net/ListHelp>
> 
> _______________________________________________
> Mailing list: https://launchpad.net/~kicad-developers
> Post to     : kicad-developers@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help   : https://help.launchpad.net/ListHelp

Attachment: smime.p7s
Description: S/MIME cryptographic signature