Just as an aside, last night's build failed, for the first time in a
while--but the diff pairs should still work fine.
Adam Wolf
On Tue, Mar 17, 2015 at 11:06 AM, Nick Østergaard <oe.nick@xxxxxxxxx
<mailto:oe.nick@xxxxxxxxx>> wrote:
2015-03-17 16:50 GMT+01:00 Bob Gustafson <bobgus@xxxxxxx
<mailto:bobgus@xxxxxxx>>:
> Hi Adam
>
> As written in the kicad build documentation, I patched the
> wxPython/wxWidgets code and built that (also added the doPatch
for the patch
> files that were not included in the virgin osx_build_wx.sh
file). All patch
> files were used successfully (including the added ones -
> macos_scrolledwindow and macos_yosemite).
>
> I also turned on most of the scripting build switches (why not..)
>
> I used a custom kicad-configure.sh script to turn on these
switches (see
> attached). From there it was just ‘make’ and ‘sudo make
install’. No compile
> errors, but as I have reported before, lots of warnings and
notes (using
> clang - which is also available on Fedora21)
>
> I have the console output saved from all of these steps if that
would be of
> interest.
>
> As you point out, the gesture/trackpad patches are not in the
patches/
> directory, so were not included. These patch files could perhaps
be included
> or not by commenting out appropriate doPatch lines in
osx_build_wx.sh
>
>
> I tried your nightlies before, but didn’t see any trackpad panning
> improvement - will try again.
>
> I will also try the nightly with Python support you mentioned in
a previous
> email. I thought about that last night after I sent the email
report.
>
> My motivation is to get a working KiCad that I can use to build
a board for
> a legacy piece of gear. I see these beautiful youtube videos of
paired board
> traces and wiggly matched delay traces - am disappointed that I
can’t have
> the same action on my OSX platform. Perhaps I should concentrate
on my
> Fedora21 box instead, although it seems that the build
instructions for that
> platform are more or less identical to OSX.
The differential pairs and length tuning stuff do not depend on python
scripting as far as I know and should be available in the latest
nightlies.
> I'm guessing that some of the OSX problems may be caused by a
mix of carbon
> and cocoa library calls. Many of the error reports have carbon
references.
> Also, try out the KiCad->About menu item.
>
> I will fish around in the DEBUG folder and look for the Python
support
> build.
>
> Because of the clumsiness of scrollbars, having two finger
panning is more
> or less essential on the OSX platform. When are you planning to
try out
> those patches in your nightly builds? The OpenGL option, without
scrollbars,
> needs those patches.
>
> Thanks very much for your efforts all
>
> Bob G
>
> On Mar 16, 2015, at 23:59, Adam Wolf
<adamwolf@xxxxxxxxxxxxxxxxxxxx
<mailto:adamwolf@xxxxxxxxxxxxxxxxxxxx>> wrote:
>
> Hi Bob,
>
> Did you add any patches? If you didn't, there definitely won't
be any
> gesture/trackpad support. It isn't ready for merging yet due to
behavior on
> other platforms.
>
> Are you looking for issues or trying to get a usable KiCad? If
the latter,
> I suggest the nightlies. I, and quite a few other people, use
them to make
> real boards! (There are even nightlies with Python support in
the DEBUG
> folder.)
>
> Adam Wolf
> Cofounder and Engineer
> W&L
>
>
> On Mon, Mar 16, 2015 at 11:46 PM, Bob Gustafson <bobgus@xxxxxxx
<mailto:bobgus@xxxxxxx>> wrote:
> Application: kicad
> Version: (2015-03-16 BZR 5522)-product Debug build
> wxWidgets: Version 3.0.2 (debug,UTF-8,compiler with C++ ABI 1002,GCC
> 4.2.1,STL containers,compatible with 2.8)
> Platform: Mac OS X (Darwin 14.1.0 x86_64), 64 bit, Little
endian, wxMac
> Boost version: 1.57.0
> USE_WX_GRAPHICS_CONTEXT=OFF
> USE_WX_OVERLAY=ON
> KICAD_SCRIPTING=ON
> KICAD_SCRIPTING_MODULES=ON
> KICAD_SCRIPTING_WXPYTHON=ON
> USE_FP_LIB_TABLE=HARD_CODED_ON
> BUILD_GITHUB_PLUGIN=ON
> KICAD_USE_WEBKIT=ON
>
>
> pcbnewinitPythonScripting() failed (error 0: Undefined error: 0)
>
> ***** Error importing the wxPython API! **** 20:43:52
> pcbnewinitPythonScripting() failed: (error 0: Undefined error: 0)
> 20:43:52
>
> ----
>
> There are a number of other error conditions - see attached
screen dumps and
> logs
>
> -----
>
> I see that the Contents/Contents typo was removed somewhere in
the 5513-5522
> changes.
>
> -----
>
> I am not able to pan anywhere using two finger gestures. When I
try, the
> newPCB zooms in and out.
>
> Hope this is helpful
>
> Bob G
>
> _______________________________________________
> Mailing list: https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
<mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> Unsubscribe : https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
> More help : https://help.launchpad.net/ListHelp
>
>
>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
<mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> Unsubscribe : https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
> More help : https://help.launchpad.net/ListHelp
>
