Hi Bob,
All the build scripts are in my Launchpad repo. Please search the
archives as I know I've posted them 3 or 4 times and I cannot get the
link easily on my phone.
Adam Wolf
On Tue, Mar 17, 2015 at 12:24 PM, Adam Wolf
<adamwolf@xxxxxxxxxxxxxxxxxxxx <mailto:adamwolf@xxxxxxxxxxxxxxxxxxxx>>
wrote:
No problem. Collin did all the heavy lifting there, adding the
Python support.
Adam Wolf
On Tue, Mar 17, 2015 at 12:24 PM, Bob Gustafson <bobgus@xxxxxxx
<mailto:bobgus@xxxxxxx>> wrote:
Hi Adam
I tried your python enabled nightly in the DEBUG folder.
Lots of my problems have been cleaned up by your nightly -
the' KiCad->About' works without an Alert box popping up - it
looks pretty clean. I tried some of the clicks that gave me
problems before and it looks pretty solid.
Thanks much.
Application: kicad
Version: (2015-03-15 BZR 5517)-product Release build
wxWidgets: Version 3.0.2 (debug,UTF-8,compiler with C++ ABI
1002,GCC 4.2.1,STL containers,compatible with 2.8)
Platform: Mac OS X (Darwin 14.1.0 x86_64), 64 bit, Little
endian, wxMac
Boost version: 1.54.0
USE_WX_GRAPHICS_CONTEXT=OFF
USE_WX_OVERLAY=ON
KICAD_SCRIPTING=ON
KICAD_SCRIPTING_MODULES=ON
KICAD_SCRIPTING_WXPYTHON=ON
USE_FP_LIB_TABLE=HARD_CODED_ON
BUILD_GITHUB_PLUGIN=ON
KICAD_USE_WEBKIT=OFF
The only thing that looks different from my builds is the use
of Boost version 1.54.0 instead of my 1.57.0
I think my 1.57.0 was massaged slightly by one of my builds in
the past - perhaps it has problems.
The newPCB->Tools->Scripting Console does pop up, but as noted
by others before, as soon as you type the 'e' in help - things
go wrong. This is fine - a nightly build (particularly in the
DEBUG folder) is there to show the latest stuff and what needs
to be done.
It would be good to also have an OSX nightly incorporating
whatever is available for panning support too. Since your
nightlies are for OSX only, progress on panning for OSX might
shine a light on the problems for other platforms.
I had a glimmer of success a couple of weeks ago when I did a
merge of Garth's trackpad branch - but this was masked by my
other difficulties (perhaps my Boost 1.57.0 ??).
Are your nightly build scripts available? I could try again
with Garth's files.
Thanks again
Bob G
On 03/17/2015 11:12 AM, Adam Wolf wrote:
Just as an aside, last night's build failed, for the first
time in a while--but the diff pairs should still work fine.
Adam Wolf
On Tue, Mar 17, 2015 at 11:06 AM, Nick Østergaard
<oe.nick@xxxxxxxxx <mailto:oe.nick@xxxxxxxxx>> wrote:
2015-03-17 16:50 GMT+01:00 Bob Gustafson <bobgus@xxxxxxx
<mailto:bobgus@xxxxxxx>>:
> Hi Adam
>
> As written in the kicad build documentation, I patched the
> wxPython/wxWidgets code and built that (also added the
doPatch for the patch
> files that were not included in the virgin
osx_build_wx.sh file). All patch
> files were used successfully (including the added ones -
> macos_scrolledwindow and macos_yosemite).
>
> I also turned on most of the scripting build switches
(why not..)
>
> I used a custom kicad-configure.sh script to turn on
these switches (see
> attached). From there it was just ‘make’ and ‘sudo make
install’. No compile
> errors, but as I have reported before, lots of warnings
and notes (using
> clang - which is also available on Fedora21)
>
> I have the console output saved from all of these steps
if that would be of
> interest.
>
> As you point out, the gesture/trackpad patches are not
in the patches/
> directory, so were not included. These patch files
could perhaps be included
> or not by commenting out appropriate doPatch lines in
osx_build_wx.sh
>
>
> I tried your nightlies before, but didn’t see any
trackpad panning
> improvement - will try again.
>
> I will also try the nightly with Python support you
mentioned in a previous
> email. I thought about that last night after I sent the
email report.
>
> My motivation is to get a working KiCad that I can use
to build a board for
> a legacy piece of gear. I see these beautiful youtube
videos of paired board
> traces and wiggly matched delay traces - am
disappointed that I can’t have
> the same action on my OSX platform. Perhaps I should
concentrate on my
> Fedora21 box instead, although it seems that the build
instructions for that
> platform are more or less identical to OSX.
The differential pairs and length tuning stuff do not
depend on python
scripting as far as I know and should be available in the
latest
nightlies.
> I'm guessing that some of the OSX problems may be
caused by a mix of carbon
> and cocoa library calls. Many of the error reports have
carbon references.
> Also, try out the KiCad->About menu item.
>
> I will fish around in the DEBUG folder and look for the
Python support
> build.
>
> Because of the clumsiness of scrollbars, having two
finger panning is more
> or less essential on the OSX platform. When are you
planning to try out
> those patches in your nightly builds? The OpenGL
option, without scrollbars,
> needs those patches.
>
> Thanks very much for your efforts all
>
> Bob G
>
> On Mar 16, 2015, at 23:59, Adam Wolf
<adamwolf@xxxxxxxxxxxxxxxxxxxx
<mailto:adamwolf@xxxxxxxxxxxxxxxxxxxx>> wrote:
>
> Hi Bob,
>
> Did you add any patches? If you didn't, there
definitely won't be any
> gesture/trackpad support. It isn't ready for merging
yet due to behavior on
> other platforms.
>
> Are you looking for issues or trying to get a usable
KiCad? If the latter,
> I suggest the nightlies. I, and quite a few other
people, use them to make
> real boards! (There are even nightlies with Python
support in the DEBUG
> folder.)
>
> Adam Wolf
> Cofounder and Engineer
> W&L
>
>
> On Mon, Mar 16, 2015 at 11:46 PM, Bob Gustafson
<bobgus@xxxxxxx <mailto:bobgus@xxxxxxx>> wrote:
> Application: kicad
> Version: (2015-03-16 BZR 5522)-product Debug build
> wxWidgets: Version 3.0.2 (debug,UTF-8,compiler with C++
ABI 1002,GCC
> 4.2.1,STL containers,compatible with 2.8)
> Platform: Mac OS X (Darwin 14.1.0 x86_64), 64 bit,
Little endian, wxMac
> Boost version: 1.57.0
> USE_WX_GRAPHICS_CONTEXT=OFF
> USE_WX_OVERLAY=ON
> KICAD_SCRIPTING=ON
> KICAD_SCRIPTING_MODULES=ON
> KICAD_SCRIPTING_WXPYTHON=ON
> USE_FP_LIB_TABLE=HARD_CODED_ON
> BUILD_GITHUB_PLUGIN=ON
> KICAD_USE_WEBKIT=ON
>
>
> pcbnewinitPythonScripting() failed (error 0: Undefined
error: 0)
>
> ***** Error importing the wxPython API! **** 20:43:52
> pcbnewinitPythonScripting() failed: (error 0: Undefined
error: 0)
> 20:43:52
>
> ----
>
> There are a number of other error conditions - see
attached screen dumps and
> logs
>
> -----
>
> I see that the Contents/Contents typo was removed
somewhere in the 5513-5522
> changes.
>
> -----
>
> I am not able to pan anywhere using two finger
gestures. When I try, the
> newPCB zooms in and out.
>
> Hope this is helpful
>
> Bob G
>
> _______________________________________________
> Mailing list: https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
<mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> Unsubscribe : https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
> More help : https://help.launchpad.net/ListHelp
>
>
>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
<mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> Unsubscribe : https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
> More help : https://help.launchpad.net/ListHelp
>
