Hi Wayne and all,
About that my suggestion of Via Stitching. I do some tests and found
that if DRC first fill zones and then do tests it does not break
anything. if you forgot to Fill or Refill zoenes before running DRC.
Regards
Heikki
On Fri, Oct 21, 2016 at 6:41 PM, Heikki Pulkkinen <hei6mail@xxxxxxxxx
<mailto:hei6mail@xxxxxxxxx>> wrote:
Hi Wayne,
If you try this, I send the last full patch of that Via Stitching.
Do not care other patches in mailing list, they are more or less
incomplete.
Regards
Heikki
On Tue, Oct 18, 2016 at 3:22 PM, Wayne Stambaugh
<stambaughw@xxxxxxxxx <mailto:stambaughw@xxxxxxxxx>> wrote:
I will look at when I get a chance. When that will be I
cannot say for
sure. I've just been really busy. I will try to get around
to it this
weekend.
Cheers,
Wayne
On 10/17/2016 3:40 PM, Jakub Kozdon wrote:
> Hi, it looks usable.
>
> Don't know if it is visible for all, but Wayne, what do you
think about it?
>
> Jakub
>
> Dne 16.10.2016 v 19:23 Heikki Pulkkinen napsal(a):
>> Hi,
>>
>> I add array feature to my Via Stitching. And an another
slowly video
>> to watch.
>> https://youtu.be/28nfoZPg2bg
>>
>> Full fixed patch and array test patch. More work have to be
done, but
>> this was easy start.
>>
>> Regards
>>
>> Heikki
>>
>> On Thu, Oct 13, 2016 at 7:23 PM, Heikki Pulkkinen
<hei6mail@xxxxxxxxx <mailto:hei6mail@xxxxxxxxx>
>> <mailto:hei6mail@xxxxxxxxx <mailto:hei6mail@xxxxxxxxx>>> wrote:
>>
>> Hi,
>>
>> Here is demovideo about via stitching. It is slowly,
because of
>> slowly machine. I do some development too, so full patch is
>> attached too.
>>
>> On Tue, Oct 11, 2016 at 5:49 PM, Marcos Chaparro
>> <nitrousnrg@xxxxxxxxx <mailto:nitrousnrg@xxxxxxxxx>
<mailto:nitrousnrg@xxxxxxxxx <mailto:nitrousnrg@xxxxxxxxx>>>
wrote:
>>
>> Hi Heikki,
>> is there any chance to make some screenshots or
video about
>> this? Some of us do compile kicad to get the latest and
>> greatest but never applied a patch for a particular
feature.
>>
>> Regards
>>
>>
>> Marcos
>>
>> On Sat, Oct 8, 2016 at 7:04 AM, Heikki Pulkkinen
>> <hei6mail@xxxxxxxxx <mailto:hei6mail@xxxxxxxxx>
<mailto:hei6mail@xxxxxxxxx <mailto:hei6mail@xxxxxxxxx>>> wrote:
>>
>> Hi,
>>
>> Putting back that my via stitching tool to
routing tool.
>> It is better that way, I think. All via tools
are in same
>> place, and it adds vias to pours only from hotkeys.
>>
>>
>>
>> On Sun, Oct 2, 2016 at 12:28 PM, Heikki Pulkkinen
>> <hei6mail@xxxxxxxxx <mailto:hei6mail@xxxxxxxxx>
<mailto:hei6mail@xxxxxxxxx <mailto:hei6mail@xxxxxxxxx>>> wrote:
>>
>> Hi,
>>
>> Finally Via Stitching without tracks is at
zone tool.
>> I tested it little bit, but more tests are
needed.
>> This patch replace all other patches. Do
not use them,
>> use only this patch. I think this is worth
of try. I
>> am going to use it anyway, even if it do
not get any
>> acceptance. First patch is for Fedora
users. It makes
>> possible to build Kicad in Fedora release
wxWidgets
>> libs whitout building wxWidget from source.
I do not
>> know has anybody else that problem, but I had.
>>
>>
>> Heikki
>>
>> On Tue, Sep 27, 2016 at 6:46 PM, Heikki
Pulkkinen
>> <hei6mail@xxxxxxxxx <mailto:hei6mail@xxxxxxxxx>
<mailto:hei6mail@xxxxxxxxx <mailto:hei6mail@xxxxxxxxx>>> wrote:
>>
>> Hi
>>
>> And I really practice. I made
improvement and
>> forgot to copy all. So improvement is
in these two
>> patches. I hope this suggestion is
accepted as a
>> new feature.
>>
>> Heikki
>>
>> On Tue, Sep 27, 2016 at 2:31 PM, Heikki
Pulkkinen
>> <hei6mail@xxxxxxxxx
<mailto:hei6mail@xxxxxxxxx> <mailto:hei6mail@xxxxxxxxx
<mailto:hei6mail@xxxxxxxxx>>>
>> wrote:
>>
>> Hi,
>>
>> As in practice, I made a patch file
of my
>> changes Not only diifs. It is
SHIFT-ALT-V
>> hotkey whitch make buried and blind
vias, as
>> it is in routing too.
>>
>>
>> Heikki
>>
>> On Sun, Sep 25, 2016 at 2:25 PM, Heikki
>> Pulkkinen <hei6mail@xxxxxxxxx
<mailto:hei6mail@xxxxxxxxx>
>> <mailto:hei6mail@xxxxxxxxx <mailto:hei6mail@xxxxxxxxx>>> wrote:
>>
>> Hi,
>>
>> I made some improvements to my
patch of
>> via stitching. Now you can just
point
>> copper pour place and press V,
it make
>> trough via. If you press
SHIFT+CTRL+V it
>> make buried or blind via.It
does not
>> change working layer. Only when
you place
>> buried or blind via from
different layer
>> than it's layer pair is. I
think that it
>> is quite easy to shoot board
full of
>> copper pours connecting vias. It is
>> possible to remove connecting
tracks from
>> old designs. Just delete
connection from
>> pad and use clenup. Only have
to remember
>> that if there are not at least
two copper
>> pours in same netcode in
different layers
>> via is deleted too. Any support?
>>
>>
>> Heikki
>>
>> On Sat, Sep 24, 2016 at 3:06
PM, Heikki
>> Pulkkinen <hei6mail@xxxxxxxxx
<mailto:hei6mail@xxxxxxxxx>
>> <mailto:hei6mail@xxxxxxxxx <mailto:hei6mail@xxxxxxxxx>>> wrote:
>>
>> Hi everybody,
>>
>> This is my suggestion to
via stitching
>> without any tracks. It connects
>> unconnected vias in different copper
>> pours witch has same
netcode. Adding
>> vias is normal routing
process without
>> routing tracks. Start -
Change Layer -
>> End. Tool that do those things
>> automatically would be good, so you
>> can add all vias in same
layer. After
>> adding vias, run "Fill or
Refill All
>> Zones" that "Clenup tracks
and vias"
>> do not remove partly
connected vias.
>>
>>
>> Heikki
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Mailing list:
https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
>> <https://launchpad.net/%7Ekicad-developers
<https://launchpad.net/%7Ekicad-developers>>
>> Post to :
kicad-developers@xxxxxxxxxxxxxxxxxxx
<mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
<mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
>> Unsubscribe :
https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
>> <https://launchpad.net/%7Ekicad-developers
<https://launchpad.net/%7Ekicad-developers>>
>> More help :
https://help.launchpad.net/ListHelp
<https://help.launchpad.net/ListHelp>
>> <https://help.launchpad.net/ListHelp
<https://help.launchpad.net/ListHelp>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
<mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> Unsubscribe : https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
>> More help : https://help.launchpad.net/ListHelp
<https://help.launchpad.net/ListHelp>
>
>
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
