Hi Orson,
Please find attached a small patch that handles multiple pad connections.
Regards
Russell
On Sat, Sep 23, 2017 at 11:03 AM Russell Oliver <roliver8143@xxxxxxxxx
<mailto:roliver8143@xxxxxxxxx>> wrote:
Hi,
Maciej : I had a look at the rounding issue and I couldn't find an
obvious reason for it.
It might be due to the translation of all components to the middle
of the sheet, but I round that off to the nearest 100mil.
I'll take a look at that pin mapping problem, I think your
solution of multiple pins will work fine.
Regards
Russell
On Sat, Sep 23, 2017 at 1:20 AM Maciej Sumiński
<maciej.suminski@xxxxxxx <mailto:maciej.suminski@xxxxxxx>> wrote:
On 09/20/2017 05:38 PM, jp charras wrote:
> Le 20/09/2017 à 17:32, Maciej Sumiński a écrit :
>> On 09/20/2017 05:29 PM, jp charras wrote:
>> [snip]
>>> After tests with 2 schematics I found a rounding issue in
coordinates (especially wires and pins):
>>> Many coordinates are very near (1 mil, therefore one
Eeschema unit) the 50 mils grid but not exactly
>>> on grid (for instance 499 instead of 500 mils)
>>> The a few values I checked are smaller (one mil) than the
grid coordinate, so I am thinking this is
>>> a rounding issue.
>>
>> Would you share an example schematic file, so we could
investigate the
>> problem?
>>
>> Regards,
>> Orson
>
> Attached the 2 schematics I tested.
> They can be found on Github.
Jean-Pierre,
Could you help me find pins/wires that are not connected due
to rounding
errors? I did my best, but I cannot find anything neither by
looking at
the files saved in KiCad format nor in ERC reports.
I noticed only missing junction marks on some of the T-shaped wire
connections, but they are missing in the original Eagle files,
so I
assume it is fine.
There is a minor bug that causes small squares on pins (as if
they were
not connected), but as soon you move a single component, they all
disappear. This should be investigated, but it is not a
rounding problem.
Regards,
Orson
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
<mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
Unsubscribe : https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
More help : https://help.launchpad.net/ListHelp
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
