kicad-developers team mailing list archive
-
kicad-developers team
-
Mailing list archive
-
Message #33658
Re: GUI garbage...?
Okay...
Reason found:
wxpython 3.0.2.0-7 on Arch Linux was updated on 2018-01-28 (last week) and built against wxgtk3 again.
Before (3.0.2.0-6) it was built against wxgtk2...
See:
https://git.archlinux.org/svntogit/community.git/commit/trunk?h=packages/wxpython&id=3f1f64acdcd28ca7789e03ecc2b1b0f79e8bf6d1
The change-note says:
"Rebuild with wxgtk3 again, kicad is no longer a blocker"
Regards,
Clemens
On 2018-02-03 14:56, Clemens Koller wrote:
> Ouch... after a rebuild from latest I am now running into the GUI garbage as well!
>
> I had to change my LD_LIBRARY_PATH from:
> LD_LIBRARY_PATH=$LD_LIBRARY_PATH:~/SW/lib
> to
> LD_LIBRARY_PATH=$LD_LIBRARY_PATH:~/SW/lib64
> as well to be able to find libkicad_3dsg.so.2.0.0.
>
> What's going on here?
>
> Regards,
>
> Clemens
>
> On 2018-02-03 13:39, Iñigo wrote:
>> Hi,
>>
>> Very same behavior here, on Manjaro with KiCad from AUR.
>>
>> If I close the Pcbnew windows KiCad closes completely.
>>
>>
>> On 03/02/18 13:26, Clemens Koller wrote:
>>> Hi, Nick!
>>>
>>> On 2018-02-03 01:02, Nick Østergaard wrote:
>>>> are you sure you didn't rebuild wxpython with gtk2?
>>> I cannot tell right out of the box if the KiCad build picks wxpython or wxpython2.8.
>>> Note, that I am installing KiCad-git into ~/SW and not into my system and run it with:
>>> LD_LIBRARY_PATH=$LD_LIBRARY_PATH:~/SW/lib PYTHONPATH=~/SW/lib/python2.7/site-packages/ ./kicad
>>> This might make is special.
>>>
>>> There are AFAICT no tweaks on the host. I'm installing the packages from the official repositories and from AUR as is.
>>>
>>> Details, how they are built can be found i.e. at:
>>> https://www.archlinux.org/packages/community/x86_64/wxpython/
>>>
>>> Note the separate wxgtk2.8 and a wxpython2.8. They are built from AUR (the arch linux user repository) as you can see here:
>>> https://aur.archlinux.org/packages/wxgtk2.8/
>>> https://aur.archlinux.org/packages/wxpython2.8/
>>>
>>> Below, some ldd and lsof outputs...
>>>
>>> Regards,
>>>
>>> Clemens
>>>
>>> $ ldd ./kicad
>>> linux-vdso.so.1 (0x00007ffca1178000)
>>> libwx_gtk2u_gl-3.0.so.0 => /usr/lib/libwx_gtk2u_gl-3.0.so.0 (0x00007f5b1f41e000)
>>> libwx_gtk2u_aui-3.0.so.0 => /usr/lib/libwx_gtk2u_aui-3.0.so.0 (0x00007f5b1f18b000)
>>> libwx_gtk2u_adv-3.0.so.0 => /usr/lib/libwx_gtk2u_adv-3.0.so.0 (0x00007f5b1edb7000)
>>> libwx_gtk2u_html-3.0.so.0 => /usr/lib/libwx_gtk2u_html-3.0.so.0 (0x00007f5b1eae7000)
>>> libwx_gtk2u_core-3.0.so.0 => /usr/lib/libwx_gtk2u_core-3.0.so.0 (0x00007f5b1e2bd000)
>>> libwx_baseu_net-3.0.so.0 => /usr/lib/libwx_baseu_net-3.0.so.0 (0x00007f5b1e079000)
>>> libwx_baseu-3.0.so.0 => /usr/lib/libwx_baseu-3.0.so.0 (0x00007f5b1dbe3000)
>>> libwx_baseu_xml-3.0.so.0 => /usr/lib/libwx_baseu_xml-3.0.so.0 (0x00007f5b1d9d3000)
>>> libwx_gtk2u_stc-3.0.so.0 => /usr/lib/libwx_gtk2u_stc-3.0.so.0 (0x00007f5b1d595000)
>>> libGLEW.so.2.1 => /usr/lib/libGLEW.so.2.1 (0x00007f5b1d2ed000)
>>> libcairo.so.2 => /usr/lib/libcairo.so.2 (0x00007f5b1cfcb000)
>>> libpixman-1.so.0 => /usr/lib/libpixman-1.so.0 (0x00007f5b1cd23000)
>>> libGL.so.1 => /usr/lib/libGL.so.1 (0x00007f5b1ca98000)
>>> libGLU.so.1 => /usr/lib/libGLU.so.1 (0x00007f5b1c818000)
>>> libcurl.so.4 => /usr/lib/libcurl.so.4 (0x00007f5b1c59b000)
>>> libssl.so.1.1 => /usr/lib/libssl.so.1.1 (0x00007f5b1c331000)
>>> libcrypto.so.1.1 => /usr/lib/libcrypto.so.1.1 (0x00007f5b1beb4000)
>>> libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x00007f5b1bb2d000)
>>> libm.so.6 => /usr/lib/libm.so.6 (0x00007f5b1b7e1000)
>>> libgomp.so.1 => /usr/lib/libgomp.so.1 (0x00007f5b1b5b3000)
>>> libgcc_s.so.1 => /usr/lib/libgcc_s.so.1 (0x00007f5b1b39c000)
>>> libpthread.so.0 => /usr/lib/libpthread.so.0 (0x00007f5b1b17e000)
>>> libc.so.6 => /usr/lib/libc.so.6 (0x00007f5b1adc7000)
>>> libgtk-x11-2.0.so.0 => /usr/lib/libgtk-x11-2.0.so.0 (0x00007f5b1a78a000)
>>> libgdk-x11-2.0.so.0 => /usr/lib/libgdk-x11-2.0.so.0 (0x00007f5b1a4d6000)
>>> libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x00007f5b1a281000)
>>> libX11.so.6 => /usr/lib/libX11.so.6 (0x00007f5b19f42000)
>>> libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0 (0x00007f5b19d1e000)
>>> libpango-1.0.so.0 => /usr/lib/libpango-1.0.so.0 (0x00007f5b19acf000)
>>> libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x00007f5b197ba000)
>>> libnotify.so.4 => /usr/lib/libnotify.so.4 (0x00007f5b195b2000)
>>> libpangocairo-1.0.so.0 => /usr/lib/libpangocairo-1.0.so.0 (0x00007f5b193a5000)
>>> libXxf86vm.so.1 => /usr/lib/libXxf86vm.so.1 (0x00007f5b1919f000)
>>> libSM.so.6 => /usr/lib/libSM.so.6 (0x00007f5b18f97000)
>>> libpng16.so.16 => /usr/lib/libpng16.so.16 (0x00007f5b18d61000)
>>> libjpeg.so.8 => /usr/lib/libjpeg.so.8 (0x00007f5b18af9000)
>>> libtiff.so.5 => /usr/lib/libtiff.so.5 (0x00007f5b18871000)
>>> libz.so.1 => /usr/lib/libz.so.1 (0x00007f5b1865a000)
>>> libdl.so.2 => /usr/lib/libdl.so.2 (0x00007f5b18456000)
>>> /lib64/ld-linux-x86-64.so.2 => /usr/lib64/ld-linux-x86-64.so.2 (0x00007f5b1f9c7000)
>>> libexpat.so.1 => /usr/lib/libexpat.so.1 (0x00007f5b18224000)
>>> libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x00007f5b17fdf000)
>>> libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x00007f5b17d16000)
>>> libxcb-shm.so.0 => /usr/lib/libxcb-shm.so.0 (0x00007f5b17b12000)
>>> libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007f5b178e9000)
>>> libxcb-render.so.0 => /usr/lib/libxcb-render.so.0 (0x00007f5b176db000)
>>> libXrender.so.1 => /usr/lib/libXrender.so.1 (0x00007f5b174d0000)
>>> libXext.so.6 => /usr/lib/libXext.so.6 (0x00007f5b172be000)
>>> librt.so.1 => /usr/lib/librt.so.1 (0x00007f5b170b6000)
>>> libGLX.so.0 => /usr/lib/libGLX.so.0 (0x00007f5b16e85000)
>>> libGLdispatch.so.0 => /usr/lib/libGLdispatch.so.0 (0x00007f5b16bcf000)
>>> libnghttp2.so.14 => /usr/lib/libnghttp2.so.14 (0x00007f5b169aa000)
>>> libidn2.so.0 => /usr/lib/libidn2.so.0 (0x00007f5b1678d000)
>>> libpsl.so.5 => /usr/lib/libpsl.so.5 (0x00007f5b1657f000)
>>> libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2 (0x00007f5b16331000)
>>> libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x00007f5b16049000)
>>> libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x00007f5b15e16000)
>>> libcom_err.so.2 => /usr/lib/libcom_err.so.2 (0x00007f5b15c12000)
>>> libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x00007f5b15a0e000)
>>> libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x00007f5b15808000)
>>> libatk-1.0.so.0 => /usr/lib/libatk-1.0.so.0 (0x00007f5b155e2000)
>>> libgio-2.0.so.0 => /usr/lib/libgio-2.0.so.0 (0x00007f5b15236000)
>>> libpangoft2-1.0.so.0 => /usr/lib/libpangoft2-1.0.so.0 (0x00007f5b15022000)
>>> libXinerama.so.1 => /usr/lib/libXinerama.so.1 (0x00007f5b14e1f000)
>>> libXi.so.6 => /usr/lib/libXi.so.6 (0x00007f5b14c0e000)
>>> libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0x00007f5b14a03000)
>>> libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0x00007f5b147f9000)
>>> libXcomposite.so.1 => /usr/lib/libXcomposite.so.1 (0x00007f5b145f6000)
>>> libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0x00007f5b143f3000)
>>> libffi.so.6 => /usr/lib/libffi.so.6 (0x00007f5b141ea000)
>>> libthai.so.0 => /usr/lib/libthai.so.0 (0x00007f5b13fe0000)
>>> libpcre.so.1 => /usr/lib/libpcre.so.1 (0x00007f5b13d6d000)
>>> libICE.so.6 => /usr/lib/libICE.so.6 (0x00007f5b13b50000)
>>> libuuid.so.1 => /usr/lib/libuuid.so.1 (0x00007f5b13949000)
>>> liblzma.so.5 => /usr/lib/liblzma.so.5 (0x00007f5b13723000)
>>> libbz2.so.1.0 => /usr/lib/libbz2.so.1.0 (0x00007f5b13513000)
>>> libharfbuzz.so.0 => /usr/lib/libharfbuzz.so.0 (0x00007f5b1326b000)
>>> libXau.so.6 => /usr/lib/libXau.so.6 (0x00007f5b13067000)
>>> libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007f5b12e61000)
>>> libunistring.so.2 => /usr/lib/libunistring.so.2 (0x00007f5b12adf000)
>>> libkrb5support.so.0 => /usr/lib/libkrb5support.so.0 (0x00007f5b128d2000)
>>> libkeyutils.so.1 => /usr/lib/libkeyutils.so.1 (0x00007f5b126ce000)
>>> libresolv.so.2 => /usr/lib/libresolv.so.2 (0x00007f5b124b7000)
>>> libmount.so.1 => /usr/lib/libmount.so.1 (0x00007f5b12261000)
>>> libdatrie.so.1 => /usr/lib/libdatrie.so.1 (0x00007f5b12059000)
>>> libgraphite2.so.3 => /usr/lib/libgraphite2.so.3 (0x00007f5b11e2d000)
>>> libblkid.so.1 => /usr/lib/libblkid.so.1 (0x00007f5b11bdf000)
>>>
>>> $ lsof -p $(pidof kicad) |grep mem
>>> kicad 1849 admin mem REG 8,33 178632 2415755 /usr/lib/libtinfo.so.6.0
>>> kicad 1849 admin mem REG 8,33 363064 2365496 /usr/lib/libreadline.so.7.0
>>> kicad 1849 admin mem REG 8,33 226936 2417093 /usr/lib/libncursesw.so.6.0
>>> kicad 1849 admin mem REG 8,33 7071160 2434677 /usr/lib/libngspice.so.0.0.0
>>> kicad 1849 admin mem REG 8,34 9411944 4871520 /home/admin/SW/bin/_eeschema.kiface
>>> kicad 1849 admin mem REG 8,33 22232 1266 /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-png.so
>>> kicad 1849 admin mem REG 8,33 705684 159551 /usr/share/fonts/TTF/DejaVuSans-Bold.ttf
>>> kicad 1849 admin mem REG 8,33 251584 2408214 /usr/lib/gvfs/libgvfscommon.so
>>> kicad 1849 admin mem REG 8,33 206768 2514480 /usr/lib/gio/modules/libgvfsdbus.so
>>> kicad 1849 admin mem REG 8,33 757076 140158 /usr/share/fonts/TTF/DejaVuSans.ttf
>>> kicad 1849 admin mem REG 8,33 555112 164609 /var/cache/fontconfig/f6b893a7224233d96cb72fd88691c0b4-le64.cache-7
>>> kicad 1849 admin mem REG 8,33 46928 2361498 /usr/lib/libnss_files-2.26.so
>>> kicad 1849 admin mem REG 8,33 183928 2385695 /usr/lib/gtk-2.0/2.10.0/engines/libclearlooks.so
>>> kicad 1849 admin mem REG 8,33 26216 2383502 /usr/lib/libogg.so.0.8.3
>>> kicad 1849 admin mem REG 8,33 183016 2383510 /usr/lib/libvorbis.so.0.4.8
>>> kicad 1849 admin mem REG 8,33 41704 2390309 /usr/lib/libltdl.so.7.3.1
>>> kicad 1849 admin mem REG 8,33 87824 2397459 /usr/lib/libtdb.so.1.3.15
>>> kicad 1849 admin mem REG 8,33 35272 2383514 /usr/lib/libvorbisfile.so.3.3.7
>>> kicad 1849 admin mem REG 8,33 72888 2397724 /usr/lib/libcanberra.so.0.2.5
>>> kicad 1849 admin mem REG 8,33 18896 2397726 /usr/lib/libcanberra-gtk.so.0.1.9
>>> kicad 1849 admin mem REG 8,33 23176 2397734 /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so
>>> kicad 1849 admin mem REG 8,33 9984 2361605 /usr/lib/gconv/UTF-32.so
>>> kicad 1849 admin mem REG 8,33 3264112 2404912 /usr/lib/locale/locale-archive
>>> kicad 1849 admin mem REG 8,33 314168 2395388 /usr/lib/libblkid.so.1.1.0
>>> kicad 1849 admin mem REG 8,33 178456 2433470 /usr/lib/libgraphite2.so.3.0.1
>>> kicad 1849 admin mem REG 8,33 31024 2377397 /usr/lib/libdatrie.so.1.3.3
>>> kicad 1849 admin mem REG 8,33 346456 2395389 /usr/lib/libmount.so.1.1.0
>>> kicad 1849 admin mem REG 8,33 84016 2361484 /usr/lib/libresolv-2.26.so
>>> kicad 1849 admin mem REG 8,33 14616 2369423 /usr/lib/libkeyutils.so.1.6
>>> kicad 1849 admin mem REG 8,33 51176 2369464 /usr/lib/libkrb5support.so.0.1
>>> kicad 1849 admin mem REG 8,33 1574720 2371908 /usr/lib/libunistring.so.2.1.0
>>> kicad 1849 admin mem REG 8,33 22688 2377428 /usr/lib/libXdmcp.so.6.0.0
>>> kicad 1849 admin mem REG 8,33 14512 2377431 /usr/lib/libXau.so.6.0.0
>>> kicad 1849 admin mem REG 8,33 686008 2362609 /usr/lib/libharfbuzz.so.0.10705.0
>>> kicad 1849 admin mem REG 8,33 66960 2365606 /usr/lib/libbz2.so.1.0.6
>>> kicad 1849 admin mem REG 8,33 154344 2370738 /usr/lib/liblzma.so.5.2.3
>>> kicad 1849 admin mem REG 8,33 26552 2371740 /usr/lib/libuuid.so.1.3.0
>>> kicad 1849 admin mem REG 8,33 102568 2382293 /usr/lib/libICE.so.6.3.0
>>> kicad 1849 admin mem REG 8,33 469216 2367778 /usr/lib/libpcre.so.1.2.9
>>> kicad 1849 admin mem REG 8,33 40752 2377403 /usr/lib/libthai.so.0.3.0
>>> kicad 1849 admin mem REG 8,33 35280 2390307 /usr/lib/libffi.so.6.0.4
>>> kicad 1849 admin mem REG 8,33 10280 2381145 /usr/lib/libXdamage.so.1.1.0
>>> kicad 1849 admin mem REG 8,33 10256 2381645 /usr/lib/libXcomposite.so.1.0.0
>>> kicad 1849 admin mem REG 8,33 38512 2381520 /usr/lib/libXcursor.so.1.0.2
>>> kicad 1849 admin mem REG 8,33 43352 2381535 /usr/lib/libXrandr.so.2.2.0
>>> kicad 1849 admin mem REG 8,33 68040 2381628 /usr/lib/libXi.so.6.1.0
>>> kicad 1849 admin mem REG 8,33 10392 2381525 /usr/lib/libXinerama.so.1.0.0
>>> kicad 1849 admin mem REG 8,33 79464 2381468 /usr/lib/libpangoft2-1.0.so.0.4000.13
>>> kicad 1849 admin mem REG 8,33 1743440 2434220 /usr/lib/libgio-2.0.so.0.5400.3
>>> kicad 1849 admin mem REG 8,33 153272 2377342 /usr/lib/libatk-1.0.so.0.22610.1
>>> kicad 1849 admin mem REG 8,33 22624 2381136 /usr/lib/libXfixes.so.3.1.0
>>> kicad 1849 admin mem REG 8,33 13992 2430333 /usr/lib/libgmodule-2.0.so.0.5400.3
>>> kicad 1849 admin mem REG 8,33 14016 2365787 /usr/lib/libcom_err.so.2.1
>>> kicad 1849 admin mem REG 8,33 206648 2369481 /usr/lib/libk5crypto.so.3.1
>>> kicad 1849 admin mem REG 8,33 948520 2369492 /usr/lib/libkrb5.so.3.3
>>> kicad 1849 admin mem REG 8,33 319384 2369511 /usr/lib/libgssapi_krb5.so.2.2
>>> kicad 1849 admin mem REG 8,33 54896 2381727 /usr/lib/libpsl.so.5.2.0
>>> kicad 1849 admin mem REG 8,33 116408 2448422 /usr/lib/libidn2.so.0.3.3
>>> kicad 1849 admin mem REG 8,33 152912 2361436 /usr/lib/libnghttp2.so.14.15.1
>>> kicad 1849 admin mem REG 8,33 612176 2369383 /usr/lib/libGLdispatch.so.0.0.0
>>> kicad 1849 admin mem REG 8,33 67272 2369389 /usr/lib/libGLX.so.0.0.0
>>> kicad 1849 admin mem REG 8,33 30920 2361483 /usr/lib/librt-2.26.so
>>> kicad 1849 admin mem REG 8,33 73688 2380691 /usr/lib/libXext.so.6.4.0
>>> kicad 1849 admin mem REG 8,33 43544 2380623 /usr/lib/libXrender.so.1.3.0
>>> kicad 1849 admin mem REG 8,33 55616 2377502 /usr/lib/libxcb-render.so.0.0.0
>>> kicad 1849 admin mem REG 8,33 166864 2377492 /usr/lib/libxcb.so.1.1.0
>>> kicad 1849 admin mem REG 8,33 14448 2377506 /usr/lib/libxcb-shm.so.0.0.0
>>> kicad 1849 admin mem REG 8,33 820928 2371600 /usr/lib/libfreetype.so.6.16.0
>>> kicad 1849 admin mem REG 8,33 280704 2431606 /usr/lib/libfontconfig.so.1.10.1
>>> kicad 1849 admin mem REG 8,33 202416 2370330 /usr/lib/libexpat.so.1.6.7
>>> kicad 1849 admin mem REG 8,33 14160 2361491 /usr/lib/libdl-2.26.so
>>> kicad 1849 admin mem REG 8,33 92056 2365615 /usr/lib/libz.so.1.2.11
>>> kicad 1849 admin mem REG 8,33 554728 2381736 /usr/lib/libtiff.so.5.3.0
>>> kicad 1849 admin mem REG 8,33 423696 2381712 /usr/lib/libjpeg.so.8.1.2
>>> kicad 1849 admin mem REG 8,33 218808 2377413 /usr/lib/libpng16.so.16.34.0
>>> kicad 1849 admin mem REG 8,33 30920 2382294 /usr/lib/libSM.so.6.0.1
>>> kicad 1849 admin mem REG 8,33 22768 2381134 /usr/lib/libXxf86vm.so.1.0.0
>>> kicad 1849 admin mem REG 8,33 50848 2381470 /usr/lib/libpangocairo-1.0.so.0.4000.13
>>> kicad 1849 admin mem REG 8,33 31408 2382986 /usr/lib/libnotify.so.4.0.0
>>> kicad 1849 admin mem REG 8,33 1129568 2430332 /usr/lib/libglib-2.0.so.0.5400.3
>>> kicad 1849 admin mem REG 8,33 321208 2381467 /usr/lib/libpango-1.0.so.0.4000.13
>>> kicad 1849 admin mem REG 8,33 145080 2370737 /usr/lib/libgdk_pixbuf-2.0.so.0.3600.10
>>> kicad 1849 admin mem REG 8,33 1306096 2380618 /usr/lib/libX11.so.6.3.0
>>> kicad 1849 admin mem REG 8,33 345936 2434178 /usr/lib/libgobject-2.0.so.0.5400.3
>>> kicad 1849 admin mem REG 8,33 735416 2382188 /usr/lib/libgdk-x11-2.0.so.0.2400.32
>>> kicad 1849 admin mem REG 8,33 4435016 2382189 /usr/lib/libgtk-x11-2.0.so.0.2400.32
>>> kicad 1849 admin mem REG 8,33 2065784 2361570 /usr/lib/libc-2.26.so
>>> kicad 1849 admin mem REG 8,33 145336 2361590 /usr/lib/libpthread-2.26.so
>>> kicad 1849 admin mem REG 8,33 760728 2404923 /usr/lib/libgcc_s.so.1
>>> kicad 1849 admin mem REG 8,33 1111536 2389850 /usr/lib/libgomp.so.1.0.0
>>> kicad 1849 admin mem REG 8,33 1358184 2361489 /usr/lib/libm-2.26.so
>>> kicad 1849 admin mem REG 8,33 11592384 2389829 /usr/lib/libstdc++.so.6.0.24
>>> kicad 1849 admin mem REG 8,33 2594952 2367801 /usr/lib/libcrypto.so.1.1
>>> kicad 1849 admin mem REG 8,33 434176 2367802 /usr/lib/libssl.so.1.1
>>> kicad 1849 admin mem REG 8,33 510216 2376596 /usr/lib/libcurl.so.4.5.0
>>> kicad 1849 admin mem REG 8,33 522952 2390618 /usr/lib/libGLU.so.1.3.1
>>> kicad 1849 admin mem REG 8,33 562944 2369390 /usr/lib/libGL.so.1.0.0
>>> kicad 1849 admin mem REG 8,33 686856 2380930 /usr/lib/libpixman-1.so.0.34.0
>>> kicad 1849 admin mem REG 8,33 1183104 2381432 /usr/lib/libcairo.so.2.11510.0
>>> kicad 1849 admin mem REG 8,33 665608 2362567 /usr/lib/libGLEW.so.2.1.0
>>> kicad 1849 admin mem REG 8,33 2340728 2397535 /usr/lib/libwx_gtk2u_stc-3.0.so.0.3.0
>>> kicad 1849 admin mem REG 8,33 63336 2414924 /usr/lib/libwx_baseu_xml-3.0.so.0.3.0
>>> kicad 1849 admin mem REG 8,33 2667712 2414922 /usr/lib/libwx_baseu-3.0.so.0.3.0
>>> kicad 1849 admin mem REG 8,33 276328 2414923 /usr/lib/libwx_baseu_net-3.0.so.0.3.0
>>> kicad 1849 admin mem REG 8,33 6413208 2397525 /usr/lib/libwx_gtk2u_core-3.0.so.0.3.0
>>> kicad 1849 admin mem REG 8,33 845664 2397528 /usr/lib/libwx_gtk2u_html-3.0.so.0.3.0
>>> kicad 1849 admin mem REG 8,33 1902480 2397526 /usr/lib/libwx_gtk2u_adv-3.0.so.0.3.0
>>> kicad 1849 admin mem REG 8,33 595816 2397531 /usr/lib/libwx_gtk2u_aui-3.0.so.0.3.0
>>> kicad 1849 admin mem REG 8,33 92008 2397536 /usr/lib/libwx_gtk2u_gl-3.0.so.0.3.0
>>> kicad 1849 admin mem REG 8,33 176640 2361571 /usr/lib/ld-2.26.so
>>> kicad 1849 admin mem REG 8,33 105900 1452059 /usr/share/icons/Adwaita/icon-theme.cache
>>> kicad 1849 admin mem REG 8,33 158196 132145 /usr/share/mime/mime.cache
>>> kicad 1849 admin mem REG 8,33 166768 170257 /var/cache/fontconfig/8d4af663993b81a124ee82e610bb31f9-le64.cache-7
>>> kicad 1849 admin mem REG 8,33 501992 170251 /var/cache/fontconfig/17090aa38d5c6f09fb8c5c354938f1d7-le64.cache-7
>>> kicad 1849 admin mem REG 8,33 502744 167721 /var/cache/fontconfig/df311e82a1a24c41a75c2c930223552e-le64.cache-7
>>> kicad 1849 admin mem REG 8,33 24484 131501 /usr/share/icons/hicolor/icon-theme.cache
>>> kicad 1849 admin mem REG 8,34 2472 4858135 /home/admin/.local/share/mime/mime.cache
>>> kicad 1849 admin mem REG 8,33 45368 159086 /var/cache/fontconfig/e95b4d59d280a3acdc6fb85954763694-le64.cache-7
>>> kicad 1849 admin mem REG 8,33 10504 164409 /var/cache/fontconfig/d4119bf364b3cb6badea4cd5ba92dc93-le64.cache-7
>>> kicad 1849 admin mem REG 8,33 53512 170250 /var/cache/fontconfig/491f45a0a771fef1c10b9b647a97fb82-le64.cache-7
>>> kicad 1849 admin mem REG 8,33 6368 170256 /var/cache/fontconfig/6ba42ae0000f58711b5caaf10d690066-le64.cache-7
>>> kicad 1849 admin mem REG 8,33 19936 170255 /var/cache/fontconfig/e83f37fcf327f1deda509da0f6605954-le64.cache-7
>>> kicad 1849 admin mem REG 8,33 17536 170254 /var/cache/fontconfig/d62e99ef547d1d24cdb1bd22ec1a2976-le64.cache-7
>>> kicad 1849 admin mem REG 8,33 146128 164117 /var/cache/fontconfig/f349e9996a5320f6dd491cedd2b1f964-le64.cache-7
>>>
>>>
>>>
>>> On 2018-02-03 01:02, Nick Østergaard wrote:
>>>> are you sure you didn't rebuild wxpython with gtk2?
>>>>
>>>> Den 3. feb. 2018 00.55 skrev "Clemens Koller" <cko@xxxxxxxxx <mailto:cko@xxxxxxxxx>>:
>>>>
>>>> Hi, Chris!
>>>>
>>>> I don't run into the issues on Arch Linux. No special tweaks. Installed packages are i.e.:
>>>>
>>>> $ pacman -Q | grep "wx"
>>>> wxformbuilder-svn 3.5.2.RC2.r2225-1
>>>> wxgtk-common 3.0.3.1-11
>>>> wxgtk2 3.0.3.1-11
>>>> wxgtk2.8 2.8.12.1-6
>>>> wxgtk3 3.0.3.1-11
>>>> wxpython 3.0.2.0-7
>>>> wxpython2.8 2.8.12.1-3
>>>>
>>>>
>>>> About KiCad:
>>>> Application: kicad
>>>> Version: (2018-01-22 revision c702646c2)-master, release build
>>>> Libraries:
>>>> wxWidgets 3.0.3
>>>> libcurl/7.58.0 OpenSSL/1.1.0g zlib/1.2.11 libidn2/2.0.4 libpsl/0.19.1 (+libidn2/2.0.4) nghttp2/1.29.0
>>>> Platform: Linux 4.14.15-1-ARCH x86_64, 64 bit, Little endian, wxGTK
>>>> Build Info:
>>>> wxWidgets: 3.0.3 (wchar_t,wx containers,compatible with 2.8) GTK+ 2.24
>>>> Boost: 1.66.0
>>>> Curl: 7.57.0
>>>> Compiler: GCC 7.2.1 with C++ ABI 1011
>>>>
>>>> Build settings:
>>>> USE_WX_GRAPHICS_CONTEXT=OFF
>>>> USE_WX_OVERLAY=OFF
>>>> KICAD_SCRIPTING=ON
>>>> KICAD_SCRIPTING_MODULES=ON
>>>> KICAD_SCRIPTING_WXPYTHON=ON
>>>> KICAD_SCRIPTING_ACTION_MENU=ON
>>>> BUILD_GITHUB_PLUGIN=ON
>>>> KICAD_USE_OCE=ON
>>>> KICAD_SPICE=ON
>>>>
>>>> Greets,
>>>> Clemens
>>>>
>>>>
>>>> On 2018-02-02 23:54, Chris Pavlina wrote:
>>>> > Okay, I can confirm this works, looks like they did switch wxpython from
>>>> > gtk2 to gtk3. Really annoying, given gtk2 and gtk3 are different
>>>> > packages libraries that use them ought to be too...
>>>> >
>>>> > Sorry for the noise, guess my distro is to blame.
>>>> >
>>>> >
>>>> > On Fri, Feb 02, 2018 at 11:55:46PM +0200, Janis Skujenieks wrote:
>>>> >> I don't know exactly, but in forum post he resolved by downgrading wxpython
>>>> >> to 3.0.2.0-6.
>>>> >> https://forum.kicad.info/t/arch-linux-problem-with-wxpython-3-0-2-0-7-reverting-to-3-0-2-0-6-works-fine-kicad-nightly/9493 <https://forum.kicad.info/t/arch-linux-problem-with-wxpython-3-0-2-0-7-reverting-to-3-0-2-0-6-works-fine-kicad-nightly/9493>
>>>> >>
>>>> >> I haven't had time to upgrade my system.
>>>> >>
>>>> >>
>>>> >> On Fri, Feb 2, 2018 at 11:45 PM, Chris Pavlina <pavlina.chris@xxxxxxxxx <mailto:pavlina.chris@xxxxxxxxx>>
>>>> >> wrote:
>>>> >>
>>>> >>> I'm confused - nickoe comments on that bug to rebuild with gtk2, but
>>>> >>> both the version info posted in the bug report and my own system
>>>> >>> indicate gtk2...
>>>> >>>
>>>> >>> On Fri, Feb 02, 2018 at 11:32:58PM +0200, Janis Skujenieks wrote:
>>>> >>>> I think you may have this problem
>>>> >>>> https://bugs.launchpad.net/kicad/+bug/1746753 <https://bugs.launchpad.net/kicad/+bug/1746753>
>>>> >>>>
>>>> >>>> On Fri, Feb 2, 2018 at 11:00 PM, Chris Pavlina <pavlina.chris@xxxxxxxxx <mailto:pavlina.chris@xxxxxxxxx>>
>>>> >>>> wrote:
>>>> >>>>
>>>> >>>>> Mostly empty toolbars, one missing toolbar, and a completely black,
>>>> >>>>> blank schematic.
>>>> >>>>>
>>>> >>>>> Arch Linux
>>>> >>>>> gtk2 2.24.32-1
>>>> >>>>> wxgtk2 3.0.3.1-11
>>>> >>>>>
>>>> >>>>> On Fri, Feb 02, 2018 at 03:53:03PM -0500, Kevin Cozens wrote:
>>>> >>>>>> On 2018-02-02 03:24 PM, Chris Pavlina wrote:
>>>> >>>>>>> https://misc.c4757p.com/kicad-is-very-broken.png <https://misc.c4757p.com/kicad-is-very-broken.png>
>>>> >>>>>>>
>>>> >>>>>>> Anyone have any idea what could possibly cause this...?
>>>> >>>>>>
>>>> >>>>>> What are we supposed to see in that image? Which operating system are
>>>> >>>>> you using?
>>>> >>>>>>
>>>> >>>>>> --
>>>> >>>>>> Cheers!
>>>> >>>>>>
>>>> >>>>>> Kevin.
>>>> >>>>>>
>>>> >>>>>> http://www.ve3syb.ca/ ; |"Nerds make the shiny things that
>>>> >>>>> distract
>>>> >>>>>> Owner of Elecraft K2 #2172 | the mouth-breathers, and that's why
>>>> >>>>> we're
>>>> >>>>>> | powerful!"
>>>> >>>>>> #include <disclaimer/favourite> | --Chris Hardwick
>>>> >>>>>>
>>>> >>>>>> _______________________________________________
>>>> >>>>>> Mailing list: https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>> >>>>>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>>>> >>>>>> Unsubscribe : https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>> >>>>>> More help : https://help.launchpad.net/ListHelp <https://help.launchpad.net/ListHelp>
>>>> >>>>>
>>>> >>>>> _______________________________________________
>>>> >>>>> Mailing list: https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>> >>>>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>>>> >>>>> Unsubscribe : https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>> >>>>> More help : https://help.launchpad.net/ListHelp <https://help.launchpad.net/ListHelp>
>>>> >>>>>
>>>> >>>
>>>> >
>>>> > _______________________________________________
>>>> > Mailing list: https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>> > Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>>>> > Unsubscribe : https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>> > More help : https://help.launchpad.net/ListHelp <https://help.launchpad.net/ListHelp>
>>>> >
>>>>
>>>> _______________________________________________
>>>> Mailing list: https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>>>> Unsubscribe : https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
>>>> More help : https://help.launchpad.net/ListHelp <https://help.launchpad.net/ListHelp>
>>>>
>>> _______________________________________________
>>> Mailing list: https://launchpad.net/~kicad-developers
>>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
>>> Unsubscribe : https://launchpad.net/~kicad-developers
>>> More help : https://help.launchpad.net/ListHelp
>>
>>
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~kicad-developers
>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> More help : https://help.launchpad.net/ListHelp
>>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help : https://help.launchpad.net/ListHelp
>
Follow ups
References
-
GUI garbage...?
From: Chris Pavlina, 2018-02-02
-
Re: GUI garbage...?
From: Kevin Cozens, 2018-02-02
-
Re: GUI garbage...?
From: Chris Pavlina, 2018-02-02
-
Re: GUI garbage...?
From: Janis Skujenieks, 2018-02-02
-
Re: GUI garbage...?
From: Chris Pavlina, 2018-02-02
-
Re: GUI garbage...?
From: Janis Skujenieks, 2018-02-02
-
Re: GUI garbage...?
From: Chris Pavlina, 2018-02-02
-
Re: GUI garbage...?
From: Clemens Koller, 2018-02-02
-
Re: GUI garbage...?
From: Nick Østergaard, 2018-02-03
-
Re: GUI garbage...?
From: Clemens Koller, 2018-02-03
-
Re: GUI garbage...?
From: Iñigo, 2018-02-03
-
Re: GUI garbage...?
From: Clemens Koller, 2018-02-03
