← Back to team overview

kicad-developers team mailing list archive

Re: Odd board

 

Looks like a different bug (2.9mm drill is smaller than 3.2mm pad).

I can’t reproduce it on 5.0rc2 Mac.  Not sure if that’s because it’s fixed in 5.0, or it only shows up on Windows, or it’s something specific to Michael’s setup.

> On 16 Apr 2018, at 22:44, Michael McCormack <mike@xxxxxxxxxx> wrote:
> 
> This is the module snipped from the board file:
> 
>   (module Ori:MountingHole_3.2mm_M3_ISO14580 (layer F.Cu) (tedit 59C8FBCE) (tstamp 5AC4E91C)
>     (at 138.25 141.050001)
>     (descr "Mounting Hole 3.2mm, no annular, M3, ISO14580")
>     (tags "mounting hole 3.2mm no annular m3 iso14580")
>     (path /583B5C0A)
>     (fp_text reference M1 (at 0 -3.75) (layer F.SilkS) hide
>       (effects (font (size 1 1) (thickness 0.15)))
>     )
>     (fp_text value "M3_Mounting Hole" (at 0 3.75) (layer F.Fab)
>       (effects (font (size 1 1) (thickness 0.15)))
>     )
>     (fp_circle (center 0 0) (end 2.75 0) (layer Cmts.User) (width 0.15))
>     (fp_circle (center 0 0) (end 3 0) (layer F.CrtYd) (width 0.05))
>     (pad "" np_thru_hole circle (at 0 0) (size 3.2 3.2) (drill 2.9) (layers *.Cu *.Mask)
>       (clearance 2))
>   )
> 
> I am using 4.0.7 under Windows 10, if you decode this is the known bug I sincerely apologize for having wasted your time.  I did not see a bug that I thought was the same thing.  If not, I will mail it to any and all of you to look at.  I won't obfuscate, I'd be afraid to disturb the problem.  I see no real problem sharing the board with Kicad developers but can also understand why my employer is not keen to have our boards posted on the internet.
> 
> Cheers
> Mike
> 
> 
> On Mon, Apr 16, 2018 at 5:13 PM, Jon Evans <jon@xxxxxxxxxxxxx <mailto:jon@xxxxxxxxxxxxx>> wrote:
> That sounds like a bug (if there is invalid data like that, we should deal with it in a better way)
> It sounds like it might be easy to make a trivial test case to attach to a bug report without using your employer's board as-is
> (maybe by removing everything manually from the kicad_pcb file except for the hole in question and the board outline?)
> 
> I can't take a look at this right this moment, but I could in the next few days if no one else jumps on it first.
> 
> -Jon
> 
> On Mon, Apr 16, 2018 at 4:35 PM, Michael McCormack <mike@xxxxxxxxxx <mailto:mike@xxxxxxxxxx>> wrote:
> This might not be quite the right place to post this, but, I've found something that is a slightly problematic with Kicad and board file.  I have a PCB that has a NPH hole located off the board, I can't see it or select it inside PCBNew, however, it gets a hole in the gerbers and I can find it in the kicad_pcb file if I open the file with a text editor.
> 
> As it is my employer's board, I can't see them being OK with me creating a bug report and posting the board file for just anyone to see; but, as I have used Kicad myself probably a decade I'd send it to someone to evaluate if it would help the project.
> 
> Is anyone interested?
> 
> _______________________________________________
> Mailing list: https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
> Post to     : kicad-developers@xxxxxxxxxxxxxxxxxxx <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> Unsubscribe : https://launchpad.net/~kicad-developers <https://launchpad.net/~kicad-developers>
> More help   : https://help.launchpad.net/ListHelp <https://help.launchpad.net/ListHelp>
> 
> 
> 


Follow ups

References