kicad-developers team mailing list archive

[Andrzej Wolski <awolski.kicad@xxxxxxxxx>]

No, this IS an error in the board :)
If you open pad properties and click OK, it won't let you save it as is, 
you will have to enable copper layers.
NPTH pads also HAVE TO exists on copper layers (I don't understand why, 
but they do).

Also, as I already mentioned, current GAL behavior is different from 4.0 
GAL and legacy, so this is a regression.

Andrzej

W dniu 2018-06-22 o 21:44, Seth Hillbrand pisze:
> Ah.  This is not an error in the board.  This is just an NPTH.  If you 
> click on it in GAL, you will see it.
>
> I think the correct patch to this should check the pad type instead of 
> drawing one with no layers.
>
> -S
>
> Am Fr., 22. Juni 2018 um 12:33 Uhr schrieb Andrzej Wolski 
> <awolski.kicad@xxxxxxxxx <mailto:awolski.kicad@xxxxxxxxx>>:
>
>     IIRC you have to leave (layers) to reproduce this.
>
>     This is a board where I found the issue:
>     https://github.com/mntmn/reform/blob/master/electronics/reform-motherboard.kicad_pcb
>     There are two mPCIE connectors in the center, they have NPTH
>     alignment holes, you can see them in legacy mode.
>
>     Andrzej
>
>     W dniu 2018-06-22 o 20:06, Seth Hillbrand pisze:
> >     Andrzej-
> >
> >     I just tested this, editing a file to remove the layers from a
> >     pad and KiCad automatically adds the pad back to all copper
> >     layers.  I see the pad in pcbnew and can edit it.
> >
> >     Can you provide a board that demonstrates the issue?  Maybe it
> >     was only the test board I used?
> >
> >     -S
> >
> >     Am Fr., 22. Juni 2018 um 10:51 Uhr schrieb Andrzej Wolski
> >     <awolski.kicad@xxxxxxxxx <mailto:awolski.kicad@xxxxxxxxx>>:
> >
> >         Hi Seth,
> >
> >         current behavior is that malformed pad holes are always
> >         hidden, so you can't see on the screen something that exists
> >         on your PCB and will be plotted in drill files. This patch
> >         makes those holes visible.
> >
> >         Andrzej
> >
> >         W dniu 2018-06-22 o 17:46, Seth Hillbrand pisze:
> > >         ​Andrzej-
> > >
> > >         Can you explain the issue that this patch addresses?  I read
> > >         the commit message but it looks like malformed pads
> > >         (GetLayerSet().any() == 0) are no longer hidden.  This seems
> > >         counter-intuitive but maybe I'm just not seeing the problem.
> > >
> > >         Thanks!
> > >         Seth​
> > >
> > >
> > >
> > >         Am Fr., 22. Juni 2018 um 03:57 Uhr schrieb Andrzej Wolski
> > >         <awolski.kicad@xxxxxxxxx <mailto:awolski.kicad@xxxxxxxxx>>:
> > >
> > >
> > >             _______________________________________________
> > >             Mailing list: https://launchpad.net/~kicad-developers
> > >             <https://launchpad.net/%7Ekicad-developers>
> > >             Post to     : kicad-developers@xxxxxxxxxxxxxxxxxxx
> > >             <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> > >             Unsubscribe : https://launchpad.net/~kicad-developers
> > >             <https://launchpad.net/%7Ekicad-developers>
> > >             More help   : https://help.launchpad.net/ListHelp