kicad-developers team mailing list archive
-
kicad-developers team
-
Mailing list archive
-
Message #38557
Re: 5.0.2 stable release.
The two macOS builds were successful, and I'll be uploading them within 2
or 3 hours. I would like another person to install them and see if things
seem OK, and then we can say they're good!
Please note that these do have the dark mode patch cherrypicked.
Adam
On Sat, Dec 8, 2018, 10:45 AM Nick Østergaard <oe.nick@xxxxxxxxx wrote:
> How goes Adam?
>
> I moved the windows builds from testing to stable now.
> On Fri, 7 Dec 2018 at 15:08, Adam Wolf <adamwolf@xxxxxxxxxxxxxxxxxxxx>
> wrote:
> >
> > Alright, I can do that then. I'll be kicking off the test builds
> shortly.
> >
> > Adam
> >
> > On Fri, Dec 7, 2018 at 8:05 AM Maciej Suminski <maciej.suminski@xxxxxxx>
> wrote:
> >>
> >> Yes, it will. The patch changes only a few Info.plist files that are
> >> rarely modified.
> >>
> >> Cheers,
> >> Orson
> >>
> >> On 12/7/18 2:46 PM, Adam Wolf wrote:
> >> > I could patch just the macOS build. Do we know if it will apply
> cleanly?
> >> > (I am away from my dev machine at the moment.)
> >> >
> >> > Adam
> >> >
> >> > On Fri, Dec 7, 2018, 7:29 AM Wayne Stambaugh <stambaughw@xxxxxxxxx
> wrote:
> >> >
> >> >> I wasn't planning on cherry picking any more commits into the 5.0
> branch
> >> >> since we are getting ready to start the march to a 5.1 release.
> Would
> >> >> it possible to just patch the macos build?
> >> >>
> >> >> On 12/7/2018 8:25 AM, Adam Wolf wrote:
> >> >>> I also thought it had been merged a while ago, otherwise I would
> have
> >> >>> said something too.
> >> >>>
> >> >>> Adam
> >> >>>
> >> >>> On Fri, Dec 7, 2018, 7:25 AM Adam Wolf <
> adamwolf@xxxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:adamwolf@xxxxxxxxxxxxxxxxxxxx> wrote:
> >> >>>
> >> >>> It will be fine on my end. Please get it merged into 5.0.2 as
> soon
> >> >>> as you can and let me know here :)
> >> >>>
> >> >>> Adam
> >> >>>
> >> >>> On Fri, Dec 7, 2018, 3:06 AM Maciej Suminski
> >> >>> <maciej.suminski@xxxxxxx <mailto:maciej.suminski@xxxxxxx>
> wrote:
> >> >>>
> >> >>> There is one more macOS-specific patch that probably should
> have
> >> >>> been
> >> >>> included in 5.0.2 to address problems with Mojave dark
> mode. As
> >> >>> far as I
> >> >>> understand, it does not require a rebuild, only replacement
> of
> >> >>> configuration files.
> >> >>>
> >> >>> Adam, do you think you can still add the patch to the macOS
> >> >>> package? I
> >> >>> apologize for late notice, I was sure that the patch had
> been
> >> >>> merged a
> >> >>> long time ago.
> >> >>>
> >> >>> Cheers,
> >> >>> Orson
> >> >>>
> >> >>> On 12/7/18 12:07 AM, Adam Wolf wrote:
> >> >>> > Thanks!
> >> >>> >
> >> >>> > On Thu, Dec 6, 2018 at 5:03 PM Nick Østergaard
> >> >>> <oe.nick@xxxxxxxxx <mailto:oe.nick@xxxxxxxxx>> wrote:
> >> >>> >
> >> >>> >> I think he thinks of the precompiled docs, yes, in the
> same
> >> >>> location as
> >> >>> >> usual.
> >> >>> >>
> >> >>> >>
> http://downloads.kicad-pcb.org/docs/kicad-doc-5.0.2.tar.gz
> >> >>> >> On Thu, 6 Dec 2018 at 23:24, Wayne Stambaugh
> >> >>> <stambaughw@xxxxxxxxx <mailto:stambaughw@xxxxxxxxx>> wrote:
> >> >>> >>>
> >> >>> >>> The doc repo is tagged for 5.0.2 so you should be able
> to
> >> >>> download an
> >> >>> >>> archive file from github.
> >> >>> >>>
> >> >>> >>> Cheers,
> >> >>> >>>
> >> >>> >>> Wayne
> >> >>> >>>
> >> >>> >>> On 12/6/2018 5:17 PM, Adam Wolf wrote:
> >> >>> >>>> Is there a 5.0.2 docs tarball?
> >> >>> >>>>
> >> >>> >>>> Adam
> >> >>> >>>>
> >> >>> >>>> On Tue, Dec 4, 2018 at 8:02 AM Wayne Stambaugh
> >> >>> <stambaughw@xxxxxxxxx <mailto:stambaughw@xxxxxxxxx>
> >> >>> >>>> <mailto:stambaughw@xxxxxxxxx
> >> >>> <mailto:stambaughw@xxxxxxxxx>>> wrote:
> >> >>> >>>>
> >> >>> >>>> Everything should be tagged and ready to fire up
> those
> >> >>> package
> >> >>> >> builders.
> >> >>> >>>> Unless there is an issue, I will make the release
> >> >>> announcement
> >> >>> >> Sunday.
> >> >>> >>>> Great work everyone!
> >> >>> >>>>
> >> >>> >>>> Cheers,
> >> >>> >>>>
> >> >>> >>>> Wayne
> >> >>> >>>>
> >> >>> >>>> On 12/4/2018 1:23 AM, Rene Pöschl wrote:
> >> >>> >>>> > The libs are now tagged.
> >> >>> >>>> >
> >> >>> >>>> > On 03/12/18 13:49, Wayne Stambaugh wrote:
> >> >>> >>>> >> I saw that the translation and doc repos were
> tagged
> >> >>> for 5.0.2.
> >> >>> >>>> Where
> >> >>> >>>> >> do we stand on the library repos?
> >> >>> >>>> >>
> >> >>> >>>> >> On 11/26/2018 6:49 PM, Evan Shultz wrote:
> >> >>> >>>> >>> I should have also mentioned that the
> outstanding
> >> >> items
> >> >>> >>>> milestoned for
> >> >>> >>>> >>> 5.0.2 are actual fixes which we would like to
> >> >>> include. We've
> >> >>> >> been
> >> >>> >>>> >>> careful not to pushing breaking changes
> flippantly
> >> >>> so tagging
> >> >>> >>>> the head
> >> >>> >>>> >>> of each library should be safe and an
> improvement.
> >> >>> Breaking
> >> >>> >> changes
> >> >>> >>>> >>> haven't been intentionally made since 5.0.0
> unless
> >> >>> it was to
> >> >>> >> fix an
> >> >>> >>>> >>> issue that might ruin a design (wrong pinout,
> >> >>> footprint pins
> >> >>> >>>> swapped,
> >> >>> >>>> >>> etc.).
> >> >>> >>>> >>>
> >> >>> >>>> >>> On Mon, Nov 26, 2018 at 3:08 PM Evan Shultz
> >> >>> >>>> <evan.shultz@xxxxxxxxx <mailto:
> evan.shultz@xxxxxxxxx>
> >> >>> <mailto:evan.shultz@xxxxxxxxx <mailto:evan.shultz@xxxxxxxxx
> >>
> >> >>> >>>> >>> <mailto:evan.shultz@xxxxxxxxx
> >> >>> <mailto:evan.shultz@xxxxxxxxx> <mailto:
> evan.shultz@xxxxxxxxx
> >> >>> <mailto:evan.shultz@xxxxxxxxx>>>>
> >> >>> >>>> wrote:
> >> >>> >>>> >>>
> >> >>> >>>> >>> Yay!
> >> >>> >>>> >>>
> >> >>> >>>> >>> We (librarians) have a few outstanding
> items
> >> >>> in the
> >> >>> >> library
> >> >>> >>>> we want
> >> >>> >>>> >>> to close before 5.0.2, but it should only
> be a
> >> >>> couple of
> >> >>> >>>> days and
> >> >>> >>>> >>> well within the one week timeline you
> >> >>> requested. Thanks
> >> >>> >>>> mostly to
> >> >>> >>>> >>> Antonio, we're now using the milestone
> feature
> >> >>> of GH so
> >> >>> >> you
> >> >>> >>>> can see
> >> >>> >>>> >>> what's left
> >> >>> >>>> at
> https://github.com/KiCad/kicad-symbols/milestone/6
> >> >>> >>>> >>> and
> >> >>> https://github.com/KiCad/kicad-footprints/milestone/1
> >> >>> >> (for
> >> >>> >>>> >>> symbols and footprints, at least).
> >> >>> >>>> >>>
> >> >>> >>>> >>> On Mon, Nov 26, 2018 at 3:05 PM Wayne
> Stambaugh
> >> >>> >>>> >>> <stambaughw@xxxxxxxxx
> >> >>> <mailto:stambaughw@xxxxxxxxx> <mailto:stambaughw@xxxxxxxxx
> >> >>> <mailto:stambaughw@xxxxxxxxx>>
> >> >>> >>>> <mailto:stambaughw@xxxxxxxxx
> >> >>> <mailto:stambaughw@xxxxxxxxx> <mailto:stambaughw@xxxxxxxxx
> >> >>> <mailto:stambaughw@xxxxxxxxx>>>>
> >> >>> >> wrote:
> >> >>> >>>> >>>
> >> >>> >>>> >>> I just tagged and pushed 5.0.2 so we
> need
> >> >>> to decide
> >> >>> >> what we
> >> >>> >>>> >>> want
> >> >>> >>>> >>> to do
> >> >>> >>>> >>> about tagging the library and
> translation
> >> >>> repos.
> >> >>> >> Rene, any
> >> >>> >>>> >>> thoughts on
> >> >>> >>>> >>> the library repos. I know there have
> been
> >> >>> a lot of
> >> >>> >> changes
> >> >>> >>>> >>> since 5.0.1
> >> >>> >>>> >>> but as long as the existing symbols
> have
> >> >>> changed too
> >> >>> >>>> >>> significantly, I'm
> >> >>> >>>> >>> fine with tagging the current head of
> each
> >> >>> library.
> >> >>> >>>> >>>
> >> >>> >>>> >>> On 11/26/2018 5:55 PM, Nick Østergaard
> >> >> wrote:
> >> >>> >>>> >>> > Are we expecting to tag 5.0.1 as
> 5.0.2
> >> >>> for the
> >> >>> >> libraries
> >> >>> >>>> >>> or are we
> >> >>> >>>> >>> > getting a minor library update as
> well?
> >> >>> >>>> >>> > On Mon, 26 Nov 2018 at 20:32, Wayne
> >> >>> Stambaugh
> >> >>> >>>> >>> <stambaughw@xxxxxxxxx
> >> >>> <mailto:stambaughw@xxxxxxxxx> <mailto:stambaughw@xxxxxxxxx
> >> >>> <mailto:stambaughw@xxxxxxxxx>>
> >> >>> >>>> <mailto:stambaughw@xxxxxxxxx
> >> >>> <mailto:stambaughw@xxxxxxxxx> <mailto:stambaughw@xxxxxxxxx
> >> >>> <mailto:stambaughw@xxxxxxxxx>>>>
> >> >>> >> wrote:
> >> >>> >>>> >>> >>
> >> >>> >>>> >>> >> I just noticed a few last minute
> >> >>> changes were made
> >> >>> >>>> to the
> >> >>> >>>> >>> 5.0
> >> >>> >>>> >>> branch.
> >> >>> >>>> >>> >> Is there anything else pending or
> am I
> >> >>> good to go
> >> >>> >> with
> >> >>> >>>> >>> tagging 5.0.2?
> >> >>> >>>> >>> >>
> >> >>> >>>> >>> >> Cheers,
> >> >>> >>>> >>> >>
> >> >>> >>>> >>> >> Wayne
> >> >>> >>>> >>> >>
> >> >>> >>>> >>> >> On 11/25/2018 2:01 PM, Wayne
> Stambaugh
> >> >>> wrote:
> >> >>> >>>> >>> >>> I plan on tagging 5.0.2 tomorrow
> >> >>> unless is a show
> >> >>> >>>> stopper
> >> >>> >>>> >>> bug that I am
> >> >>> >>>> >>> >>> not aware of. My goal is to give
> the
> >> >>> library,
> >> >>> >> doc, and
> >> >>> >>>> >>> translations a
> >> >>> >>>> >>> >>> week to get tagged for 5.0.2 and
> >> >>> another week for
> >> >>> >> the
> >> >>> >>>> >>> installers to get
> >> >>> >>>> >>> >>> built so I can make the release
> >> >>> announcement on
> >> >>> >> 12/9.
> >> >>> >>>> >>> Please let me
> >> >>> >>>> >>> >>> know if this doesn't fit into your
> >> >>> schedule so we
> >> >>> >>>> can make
> >> >>> >>>> >>> other plans.
> >> >>> >>>> >>> >>>
> >> >>> >>>> >>> >>> Once 5.0.2 is released, I would
> like
> >> >>> to string
> >> >>> >>>> freeze the
> >> >>> >>>> >>> development
> >> >>> >>>> >>> >>> branch to start getting ready of
> 5.1
> >> >>> release
> >> >>> >>>> candidates by
> >> >>> >>>> >>> the beginning
> >> >>> >>>> >>> >>> of the year. If you have any UI
> >> >>> string changes
> >> >>> >>>> that you
> >> >>> >>>> >>> are
> >> >>> >>>> >>> planning to
> >> >>> >>>> >>> >>> make, now would be a good time.
> >> >>> >>>> >>> >>>
> >> >>> >>>> >>> >>> Thank you again everyone for your
> hard
> >> >>> work.
> >> >>> >> KiCad
> >> >>> >>>> >>> continues to
> >> >>> >>>> >>> >>> steadily improve due to your
> efforts.
> >> >>> >>>> >>> >>>
> >> >>> >>>> >>> >>> Cheers,
> >> >>> >>>> >>> >>>
> >> >>> >>>> >>> >>> Wayne
> >> >>> >>>> >>> >>>
> >> >>> >>>> >>> >>
> >> >>> >>>> >>> >>
> >> >>> _______________________________________________
> >> >>> >>>> >>> >> Mailing list:
> >> >>> >> https://launchpad.net/~kicad-developers
> >> >>> >>>> >>> >> Post to :
> >> >>> kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
> >> >>> >>>> >>>
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>>
> >> >>> >>>> >>> >> Unsubscribe :
> >> >>> >> https://launchpad.net/~kicad-developers
> >> >>> >>>> >>> >> More help :
> >> >>> https://help.launchpad.net/ListHelp
> >> >>> >>>> >>>
> >> >>> >>>> >>>
> >> >>> _______________________________________________
> >> >>> >>>> >>> Mailing list:
> >> >>> https://launchpad.net/~kicad-developers
> >> >>> >>>> >>> Post to :
> >> >>> kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
> >> >>> >>>> >>>
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>>
> >> >>> >>>> >>> Unsubscribe :
> >> >>> https://launchpad.net/~kicad-developers
> >> >>> >>>> >>> More help :
> >> >>> https://help.launchpad.net/ListHelp
> >> >>> >>>> >>>
> >> >>> >>>> >> _______________________________________________
> >> >>> >>>> >> Mailing list:
> >> >> https://launchpad.net/~kicad-developers
> >> >>> >>>> >> Post to :
> kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
> >> >>> >>>> >> Unsubscribe :
> >> >> https://launchpad.net/~kicad-developers
> >> >>> >>>> >> More help :
> https://help.launchpad.net/ListHelp
> >> >>> >>>> >
> >> >>> >>>> >
> >> >>> >>>> >
> >> >>> >>>> > _______________________________________________
> >> >>> >>>> > Mailing list:
> https://launchpad.net/~kicad-developers
> >> >>> >>>> > Post to :
> kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
> >> >>> >>>> > Unsubscribe :
> https://launchpad.net/~kicad-developers
> >> >>> >>>> > More help :
> https://help.launchpad.net/ListHelp
> >> >>> >>>>
> >> >>> >>>> _______________________________________________
> >> >>> >>>> Mailing list:
> https://launchpad.net/~kicad-developers
> >> >>> >>>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
> >> >>> >>>> Unsubscribe :
> https://launchpad.net/~kicad-developers
> >> >>> >>>> More help : https://help.launchpad.net/ListHelp
> >> >>> >>>>
> >> >>> >>>
> >> >>> >>> _______________________________________________
> >> >>> >>> Mailing list: https://launchpad.net/~kicad-developers
> >> >>> >>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >> >>> >>> Unsubscribe : https://launchpad.net/~kicad-developers
> >> >>> >>> More help : https://help.launchpad.net/ListHelp
> >> >>> >>
> >> >>> >
> >> >>> >
> >> >>> > _______________________________________________
> >> >>> > Mailing list: https://launchpad.net/~kicad-developers
> >> >>> > Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >> >>> > Unsubscribe : https://launchpad.net/~kicad-developers
> >> >>> > More help : https://help.launchpad.net/ListHelp
> >> >>> >
> >> >>>
> >> >>> _______________________________________________
> >> >>> Mailing list: https://launchpad.net/~kicad-developers
> >> >>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
> >> >>> Unsubscribe : https://launchpad.net/~kicad-developers
> >> >>> More help : https://help.launchpad.net/ListHelp
> >> >>>
> >> >>>
> >> >>> _______________________________________________
> >> >>> Mailing list: https://launchpad.net/~kicad-developers
> >> >>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >>> Unsubscribe : https://launchpad.net/~kicad-developers
> >> >>> More help : https://help.launchpad.net/ListHelp
> >> >>>
> >> >>
> >> >> _______________________________________________
> >> >> Mailing list: https://launchpad.net/~kicad-developers
> >> >> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> >> Unsubscribe : https://launchpad.net/~kicad-developers
> >> >> More help : https://help.launchpad.net/ListHelp
> >> >>
> >> >
> >> >
> >> > _______________________________________________
> >> > Mailing list: https://launchpad.net/~kicad-developers
> >> > Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> > Unsubscribe : https://launchpad.net/~kicad-developers
> >> > More help : https://help.launchpad.net/ListHelp
> >> >
> >>
> >> _______________________________________________
> >> Mailing list: https://launchpad.net/~kicad-developers
> >> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
> >> Unsubscribe : https://launchpad.net/~kicad-developers
> >> More help : https://help.launchpad.net/ListHelp
> >
> > _______________________________________________
> > Mailing list: https://launchpad.net/~kicad-developers
> > Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
> > Unsubscribe : https://launchpad.net/~kicad-developers
> > More help : https://help.launchpad.net/ListHelp
>
Follow ups
References
-
5.0.2 stable release.
From: Wayne Stambaugh, 2018-11-25
-
Re: 5.0.2 stable release.
From: Wayne Stambaugh, 2018-11-26
-
Re: 5.0.2 stable release.
From: Evan Shultz, 2018-11-26
-
Re: 5.0.2 stable release.
From: Evan Shultz, 2018-11-26
-
Re: 5.0.2 stable release.
From: Wayne Stambaugh, 2018-12-03
-
Re: 5.0.2 stable release.
From: Rene Pöschl, 2018-12-04
-
Re: 5.0.2 stable release.
From: Wayne Stambaugh, 2018-12-04
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-06
-
Re: 5.0.2 stable release.
From: Wayne Stambaugh, 2018-12-06
-
Re: 5.0.2 stable release.
From: Nick Østergaard, 2018-12-06
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-06
-
Re: 5.0.2 stable release.
From: Maciej Suminski, 2018-12-07
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-07
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-07
-
Re: 5.0.2 stable release.
From: Wayne Stambaugh, 2018-12-07
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-07
-
Re: 5.0.2 stable release.
From: Maciej Suminski, 2018-12-07
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-07
-
Re: 5.0.2 stable release.
From: Nick Østergaard, 2018-12-08
