kicad-developers team mailing list archive
-
kicad-developers team
-
Mailing list archive
-
Message #38558
Re: 5.0.2 stable release.
They're here. http://downloads.kicad-pcb.org/osx/testing/
Adam
On Sat, Dec 8, 2018 at 12:46 PM Adam Wolf <adamwolf@xxxxxxxxxxxxxxxxxxxx>
wrote:
> The two macOS builds were successful, and I'll be uploading them within 2
> or 3 hours. I would like another person to install them and see if things
> seem OK, and then we can say they're good!
>
> Please note that these do have the dark mode patch cherrypicked.
>
> Adam
>
> On Sat, Dec 8, 2018, 10:45 AM Nick Østergaard <oe.nick@xxxxxxxxx wrote:
>
>> How goes Adam?
>>
>> I moved the windows builds from testing to stable now.
>> On Fri, 7 Dec 2018 at 15:08, Adam Wolf <adamwolf@xxxxxxxxxxxxxxxxxxxx>
>> wrote:
>> >
>> > Alright, I can do that then. I'll be kicking off the test builds
>> shortly.
>> >
>> > Adam
>> >
>> > On Fri, Dec 7, 2018 at 8:05 AM Maciej Suminski <maciej.suminski@xxxxxxx>
>> wrote:
>> >>
>> >> Yes, it will. The patch changes only a few Info.plist files that are
>> >> rarely modified.
>> >>
>> >> Cheers,
>> >> Orson
>> >>
>> >> On 12/7/18 2:46 PM, Adam Wolf wrote:
>> >> > I could patch just the macOS build. Do we know if it will apply
>> cleanly?
>> >> > (I am away from my dev machine at the moment.)
>> >> >
>> >> > Adam
>> >> >
>> >> > On Fri, Dec 7, 2018, 7:29 AM Wayne Stambaugh <stambaughw@xxxxxxxxx
>> wrote:
>> >> >
>> >> >> I wasn't planning on cherry picking any more commits into the 5.0
>> branch
>> >> >> since we are getting ready to start the march to a 5.1 release.
>> Would
>> >> >> it possible to just patch the macos build?
>> >> >>
>> >> >> On 12/7/2018 8:25 AM, Adam Wolf wrote:
>> >> >>> I also thought it had been merged a while ago, otherwise I would
>> have
>> >> >>> said something too.
>> >> >>>
>> >> >>> Adam
>> >> >>>
>> >> >>> On Fri, Dec 7, 2018, 7:25 AM Adam Wolf <
>> adamwolf@xxxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:adamwolf@xxxxxxxxxxxxxxxxxxxx> wrote:
>> >> >>>
>> >> >>> It will be fine on my end. Please get it merged into 5.0.2 as
>> soon
>> >> >>> as you can and let me know here :)
>> >> >>>
>> >> >>> Adam
>> >> >>>
>> >> >>> On Fri, Dec 7, 2018, 3:06 AM Maciej Suminski
>> >> >>> <maciej.suminski@xxxxxxx <mailto:maciej.suminski@xxxxxxx>
>> wrote:
>> >> >>>
>> >> >>> There is one more macOS-specific patch that probably
>> should have
>> >> >>> been
>> >> >>> included in 5.0.2 to address problems with Mojave dark
>> mode. As
>> >> >>> far as I
>> >> >>> understand, it does not require a rebuild, only
>> replacement of
>> >> >>> configuration files.
>> >> >>>
>> >> >>> Adam, do you think you can still add the patch to the macOS
>> >> >>> package? I
>> >> >>> apologize for late notice, I was sure that the patch had
>> been
>> >> >>> merged a
>> >> >>> long time ago.
>> >> >>>
>> >> >>> Cheers,
>> >> >>> Orson
>> >> >>>
>> >> >>> On 12/7/18 12:07 AM, Adam Wolf wrote:
>> >> >>> > Thanks!
>> >> >>> >
>> >> >>> > On Thu, Dec 6, 2018 at 5:03 PM Nick Østergaard
>> >> >>> <oe.nick@xxxxxxxxx <mailto:oe.nick@xxxxxxxxx>> wrote:
>> >> >>> >
>> >> >>> >> I think he thinks of the precompiled docs, yes, in the
>> same
>> >> >>> location as
>> >> >>> >> usual.
>> >> >>> >>
>> >> >>> >>
>> http://downloads.kicad-pcb.org/docs/kicad-doc-5.0.2.tar.gz
>> >> >>> >> On Thu, 6 Dec 2018 at 23:24, Wayne Stambaugh
>> >> >>> <stambaughw@xxxxxxxxx <mailto:stambaughw@xxxxxxxxx>>
>> wrote:
>> >> >>> >>>
>> >> >>> >>> The doc repo is tagged for 5.0.2 so you should be able
>> to
>> >> >>> download an
>> >> >>> >>> archive file from github.
>> >> >>> >>>
>> >> >>> >>> Cheers,
>> >> >>> >>>
>> >> >>> >>> Wayne
>> >> >>> >>>
>> >> >>> >>> On 12/6/2018 5:17 PM, Adam Wolf wrote:
>> >> >>> >>>> Is there a 5.0.2 docs tarball?
>> >> >>> >>>>
>> >> >>> >>>> Adam
>> >> >>> >>>>
>> >> >>> >>>> On Tue, Dec 4, 2018 at 8:02 AM Wayne Stambaugh
>> >> >>> <stambaughw@xxxxxxxxx <mailto:stambaughw@xxxxxxxxx>
>> >> >>> >>>> <mailto:stambaughw@xxxxxxxxx
>> >> >>> <mailto:stambaughw@xxxxxxxxx>>> wrote:
>> >> >>> >>>>
>> >> >>> >>>> Everything should be tagged and ready to fire up
>> those
>> >> >>> package
>> >> >>> >> builders.
>> >> >>> >>>> Unless there is an issue, I will make the release
>> >> >>> announcement
>> >> >>> >> Sunday.
>> >> >>> >>>> Great work everyone!
>> >> >>> >>>>
>> >> >>> >>>> Cheers,
>> >> >>> >>>>
>> >> >>> >>>> Wayne
>> >> >>> >>>>
>> >> >>> >>>> On 12/4/2018 1:23 AM, Rene Pöschl wrote:
>> >> >>> >>>> > The libs are now tagged.
>> >> >>> >>>> >
>> >> >>> >>>> > On 03/12/18 13:49, Wayne Stambaugh wrote:
>> >> >>> >>>> >> I saw that the translation and doc repos were
>> tagged
>> >> >>> for 5.0.2.
>> >> >>> >>>> Where
>> >> >>> >>>> >> do we stand on the library repos?
>> >> >>> >>>> >>
>> >> >>> >>>> >> On 11/26/2018 6:49 PM, Evan Shultz wrote:
>> >> >>> >>>> >>> I should have also mentioned that the
>> outstanding
>> >> >> items
>> >> >>> >>>> milestoned for
>> >> >>> >>>> >>> 5.0.2 are actual fixes which we would like to
>> >> >>> include. We've
>> >> >>> >> been
>> >> >>> >>>> >>> careful not to pushing breaking changes
>> flippantly
>> >> >>> so tagging
>> >> >>> >>>> the head
>> >> >>> >>>> >>> of each library should be safe and an
>> improvement.
>> >> >>> Breaking
>> >> >>> >> changes
>> >> >>> >>>> >>> haven't been intentionally made since 5.0.0
>> unless
>> >> >>> it was to
>> >> >>> >> fix an
>> >> >>> >>>> >>> issue that might ruin a design (wrong pinout,
>> >> >>> footprint pins
>> >> >>> >>>> swapped,
>> >> >>> >>>> >>> etc.).
>> >> >>> >>>> >>>
>> >> >>> >>>> >>> On Mon, Nov 26, 2018 at 3:08 PM Evan Shultz
>> >> >>> >>>> <evan.shultz@xxxxxxxxx <mailto:
>> evan.shultz@xxxxxxxxx>
>> >> >>> <mailto:evan.shultz@xxxxxxxxx <mailto:
>> evan.shultz@xxxxxxxxx>>
>> >> >>> >>>> >>> <mailto:evan.shultz@xxxxxxxxx
>> >> >>> <mailto:evan.shultz@xxxxxxxxx> <mailto:
>> evan.shultz@xxxxxxxxx
>> >> >>> <mailto:evan.shultz@xxxxxxxxx>>>>
>> >> >>> >>>> wrote:
>> >> >>> >>>> >>>
>> >> >>> >>>> >>> Yay!
>> >> >>> >>>> >>>
>> >> >>> >>>> >>> We (librarians) have a few outstanding
>> items
>> >> >>> in the
>> >> >>> >> library
>> >> >>> >>>> we want
>> >> >>> >>>> >>> to close before 5.0.2, but it should
>> only be a
>> >> >>> couple of
>> >> >>> >>>> days and
>> >> >>> >>>> >>> well within the one week timeline you
>> >> >>> requested. Thanks
>> >> >>> >>>> mostly to
>> >> >>> >>>> >>> Antonio, we're now using the milestone
>> feature
>> >> >>> of GH so
>> >> >>> >> you
>> >> >>> >>>> can see
>> >> >>> >>>> >>> what's left
>> >> >>> >>>> at
>> https://github.com/KiCad/kicad-symbols/milestone/6
>> >> >>> >>>> >>> and
>> >> >>> https://github.com/KiCad/kicad-footprints/milestone/1
>> >> >>> >> (for
>> >> >>> >>>> >>> symbols and footprints, at least).
>> >> >>> >>>> >>>
>> >> >>> >>>> >>> On Mon, Nov 26, 2018 at 3:05 PM Wayne
>> Stambaugh
>> >> >>> >>>> >>> <stambaughw@xxxxxxxxx
>> >> >>> <mailto:stambaughw@xxxxxxxxx> <mailto:stambaughw@xxxxxxxxx
>> >> >>> <mailto:stambaughw@xxxxxxxxx>>
>> >> >>> >>>> <mailto:stambaughw@xxxxxxxxx
>> >> >>> <mailto:stambaughw@xxxxxxxxx> <mailto:stambaughw@xxxxxxxxx
>> >> >>> <mailto:stambaughw@xxxxxxxxx>>>>
>> >> >>> >> wrote:
>> >> >>> >>>> >>>
>> >> >>> >>>> >>> I just tagged and pushed 5.0.2 so we
>> need
>> >> >>> to decide
>> >> >>> >> what we
>> >> >>> >>>> >>> want
>> >> >>> >>>> >>> to do
>> >> >>> >>>> >>> about tagging the library and
>> translation
>> >> >>> repos.
>> >> >>> >> Rene, any
>> >> >>> >>>> >>> thoughts on
>> >> >>> >>>> >>> the library repos. I know there
>> have been
>> >> >>> a lot of
>> >> >>> >> changes
>> >> >>> >>>> >>> since 5.0.1
>> >> >>> >>>> >>> but as long as the existing symbols
>> have
>> >> >>> changed too
>> >> >>> >>>> >>> significantly, I'm
>> >> >>> >>>> >>> fine with tagging the current head
>> of each
>> >> >>> library.
>> >> >>> >>>> >>>
>> >> >>> >>>> >>> On 11/26/2018 5:55 PM, Nick
>> Østergaard
>> >> >> wrote:
>> >> >>> >>>> >>> > Are we expecting to tag 5.0.1 as
>> 5.0.2
>> >> >>> for the
>> >> >>> >> libraries
>> >> >>> >>>> >>> or are we
>> >> >>> >>>> >>> > getting a minor library update as
>> well?
>> >> >>> >>>> >>> > On Mon, 26 Nov 2018 at 20:32, Wayne
>> >> >>> Stambaugh
>> >> >>> >>>> >>> <stambaughw@xxxxxxxxx
>> >> >>> <mailto:stambaughw@xxxxxxxxx> <mailto:stambaughw@xxxxxxxxx
>> >> >>> <mailto:stambaughw@xxxxxxxxx>>
>> >> >>> >>>> <mailto:stambaughw@xxxxxxxxx
>> >> >>> <mailto:stambaughw@xxxxxxxxx> <mailto:stambaughw@xxxxxxxxx
>> >> >>> <mailto:stambaughw@xxxxxxxxx>>>>
>> >> >>> >> wrote:
>> >> >>> >>>> >>> >>
>> >> >>> >>>> >>> >> I just noticed a few last minute
>> >> >>> changes were made
>> >> >>> >>>> to the
>> >> >>> >>>> >>> 5.0
>> >> >>> >>>> >>> branch.
>> >> >>> >>>> >>> >> Is there anything else pending or
>> am I
>> >> >>> good to go
>> >> >>> >> with
>> >> >>> >>>> >>> tagging 5.0.2?
>> >> >>> >>>> >>> >>
>> >> >>> >>>> >>> >> Cheers,
>> >> >>> >>>> >>> >>
>> >> >>> >>>> >>> >> Wayne
>> >> >>> >>>> >>> >>
>> >> >>> >>>> >>> >> On 11/25/2018 2:01 PM, Wayne
>> Stambaugh
>> >> >>> wrote:
>> >> >>> >>>> >>> >>> I plan on tagging 5.0.2 tomorrow
>> >> >>> unless is a show
>> >> >>> >>>> stopper
>> >> >>> >>>> >>> bug that I am
>> >> >>> >>>> >>> >>> not aware of. My goal is to
>> give the
>> >> >>> library,
>> >> >>> >> doc, and
>> >> >>> >>>> >>> translations a
>> >> >>> >>>> >>> >>> week to get tagged for 5.0.2 and
>> >> >>> another week for
>> >> >>> >> the
>> >> >>> >>>> >>> installers to get
>> >> >>> >>>> >>> >>> built so I can make the release
>> >> >>> announcement on
>> >> >>> >> 12/9.
>> >> >>> >>>> >>> Please let me
>> >> >>> >>>> >>> >>> know if this doesn't fit into
>> your
>> >> >>> schedule so we
>> >> >>> >>>> can make
>> >> >>> >>>> >>> other plans.
>> >> >>> >>>> >>> >>>
>> >> >>> >>>> >>> >>> Once 5.0.2 is released, I would
>> like
>> >> >>> to string
>> >> >>> >>>> freeze the
>> >> >>> >>>> >>> development
>> >> >>> >>>> >>> >>> branch to start getting ready of
>> 5.1
>> >> >>> release
>> >> >>> >>>> candidates by
>> >> >>> >>>> >>> the beginning
>> >> >>> >>>> >>> >>> of the year. If you have any UI
>> >> >>> string changes
>> >> >>> >>>> that you
>> >> >>> >>>> >>> are
>> >> >>> >>>> >>> planning to
>> >> >>> >>>> >>> >>> make, now would be a good time.
>> >> >>> >>>> >>> >>>
>> >> >>> >>>> >>> >>> Thank you again everyone for
>> your hard
>> >> >>> work.
>> >> >>> >> KiCad
>> >> >>> >>>> >>> continues to
>> >> >>> >>>> >>> >>> steadily improve due to your
>> efforts.
>> >> >>> >>>> >>> >>>
>> >> >>> >>>> >>> >>> Cheers,
>> >> >>> >>>> >>> >>>
>> >> >>> >>>> >>> >>> Wayne
>> >> >>> >>>> >>> >>>
>> >> >>> >>>> >>> >>
>> >> >>> >>>> >>> >>
>> >> >>> _______________________________________________
>> >> >>> >>>> >>> >> Mailing list:
>> >> >>> >> https://launchpad.net/~kicad-developers
>> >> >>> >>>> >>> >> Post to :
>> >> >>> kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
>> >> >>> >>>> >>>
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>>
>> >> >>> >>>> >>> >> Unsubscribe :
>> >> >>> >> https://launchpad.net/~kicad-developers
>> >> >>> >>>> >>> >> More help :
>> >> >>> https://help.launchpad.net/ListHelp
>> >> >>> >>>> >>>
>> >> >>> >>>> >>>
>> >> >>> _______________________________________________
>> >> >>> >>>> >>> Mailing list:
>> >> >>> https://launchpad.net/~kicad-developers
>> >> >>> >>>> >>> Post to :
>> >> >>> kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
>> >> >>> >>>> >>>
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>>
>> >> >>> >>>> >>> Unsubscribe :
>> >> >>> https://launchpad.net/~kicad-developers
>> >> >>> >>>> >>> More help :
>> >> >>> https://help.launchpad.net/ListHelp
>> >> >>> >>>> >>>
>> >> >>> >>>> >> _______________________________________________
>> >> >>> >>>> >> Mailing list:
>> >> >> https://launchpad.net/~kicad-developers
>> >> >>> >>>> >> Post to :
>> kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
>> >> >>> >>>> >> Unsubscribe :
>> >> >> https://launchpad.net/~kicad-developers
>> >> >>> >>>> >> More help :
>> https://help.launchpad.net/ListHelp
>> >> >>> >>>> >
>> >> >>> >>>> >
>> >> >>> >>>> >
>> >> >>> >>>> > _______________________________________________
>> >> >>> >>>> > Mailing list:
>> https://launchpad.net/~kicad-developers
>> >> >>> >>>> > Post to :
>> kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
>> >> >>> >>>> > Unsubscribe :
>> https://launchpad.net/~kicad-developers
>> >> >>> >>>> > More help :
>> https://help.launchpad.net/ListHelp
>> >> >>> >>>>
>> >> >>> >>>> _______________________________________________
>> >> >>> >>>> Mailing list:
>> https://launchpad.net/~kicad-developers
>> >> >>> >>>> Post to :
>> kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> >> >>> >>>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>>
>> >> >>> >>>> Unsubscribe :
>> https://launchpad.net/~kicad-developers
>> >> >>> >>>> More help : https://help.launchpad.net/ListHelp
>> >> >>> >>>>
>> >> >>> >>>
>> >> >>> >>> _______________________________________________
>> >> >>> >>> Mailing list: https://launchpad.net/~kicad-developers
>> >> >>> >>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> >> >>> >>> Unsubscribe : https://launchpad.net/~kicad-developers
>> >> >>> >>> More help : https://help.launchpad.net/ListHelp
>> >> >>> >>
>> >> >>> >
>> >> >>> >
>> >> >>> > _______________________________________________
>> >> >>> > Mailing list: https://launchpad.net/~kicad-developers
>> >> >>> > Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> >> >>> > Unsubscribe : https://launchpad.net/~kicad-developers
>> >> >>> > More help : https://help.launchpad.net/ListHelp
>> >> >>> >
>> >> >>>
>> >> >>> _______________________________________________
>> >> >>> Mailing list: https://launchpad.net/~kicad-developers
>> >> >>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> <mailto:kicad-developers@xxxxxxxxxxxxxxxxxxx>
>> >> >>> Unsubscribe : https://launchpad.net/~kicad-developers
>> >> >>> More help : https://help.launchpad.net/ListHelp
>> >> >>>
>> >> >>>
>> >> >>> _______________________________________________
>> >> >>> Mailing list: https://launchpad.net/~kicad-developers
>> >> >>> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >>> Unsubscribe : https://launchpad.net/~kicad-developers
>> >> >>> More help : https://help.launchpad.net/ListHelp
>> >> >>>
>> >> >>
>> >> >> _______________________________________________
>> >> >> Mailing list: https://launchpad.net/~kicad-developers
>> >> >> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> >> Unsubscribe : https://launchpad.net/~kicad-developers
>> >> >> More help : https://help.launchpad.net/ListHelp
>> >> >>
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > Mailing list: https://launchpad.net/~kicad-developers
>> >> > Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> > Unsubscribe : https://launchpad.net/~kicad-developers
>> >> > More help : https://help.launchpad.net/ListHelp
>> >> >
>> >>
>> >> _______________________________________________
>> >> Mailing list: https://launchpad.net/~kicad-developers
>> >> Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
>> >> Unsubscribe : https://launchpad.net/~kicad-developers
>> >> More help : https://help.launchpad.net/ListHelp
>> >
>> > _______________________________________________
>> > Mailing list: https://launchpad.net/~kicad-developers
>> > Post to : kicad-developers@xxxxxxxxxxxxxxxxxxx
>> > Unsubscribe : https://launchpad.net/~kicad-developers
>> > More help : https://help.launchpad.net/ListHelp
>>
>
Follow ups
References
-
5.0.2 stable release.
From: Wayne Stambaugh, 2018-11-25
-
Re: 5.0.2 stable release.
From: Wayne Stambaugh, 2018-11-26
-
Re: 5.0.2 stable release.
From: Evan Shultz, 2018-11-26
-
Re: 5.0.2 stable release.
From: Evan Shultz, 2018-11-26
-
Re: 5.0.2 stable release.
From: Wayne Stambaugh, 2018-12-03
-
Re: 5.0.2 stable release.
From: Rene Pöschl, 2018-12-04
-
Re: 5.0.2 stable release.
From: Wayne Stambaugh, 2018-12-04
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-06
-
Re: 5.0.2 stable release.
From: Wayne Stambaugh, 2018-12-06
-
Re: 5.0.2 stable release.
From: Nick Østergaard, 2018-12-06
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-06
-
Re: 5.0.2 stable release.
From: Maciej Suminski, 2018-12-07
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-07
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-07
-
Re: 5.0.2 stable release.
From: Wayne Stambaugh, 2018-12-07
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-07
-
Re: 5.0.2 stable release.
From: Maciej Suminski, 2018-12-07
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-07
-
Re: 5.0.2 stable release.
From: Nick Østergaard, 2018-12-08
-
Re: 5.0.2 stable release.
From: Adam Wolf, 2018-12-08