linaro-pkg team mailing list archive

[Ming Lei <709245@xxxxxxxxxxxxxxxxxx>]

Emeric,

On Wed, Jul 11, 2012 at 1:20 AM, Emeric Vigier
<709245@xxxxxxxxxxxxxxxxxx> wrote:
> Ming Lei,
>
> Delay between URB submission and call-back for a given URB is huge indeed...
> My hardware (panda rev A3) is fine: linaro-12.05 (kernel-3.4) and linaro-11.09's ethernet works just fine.

Yes, so it may be caused by ehci driver or some ehci-omap low level
configuration.

But I have no idea about the root cause since there are very few
information about
the problem.

Maybe you need to use a USB analyzer to trace the bus traffic if you
have it.

Or one easier way is to run 'git bisect' on upstream kernel or stable-tree to
look for the commit which fixes the problem.


Thanks,
--
Ming Lei

-- 
You received this bug notification because you are a member of Linaro
Maintainers, which is the registrant for Linaro Linux.
https://bugs.launchpad.net/bugs/709245

Title:
  ARM SMP scheduler performance bug

Status in Linaro Ubuntu Evaluation Builds:
  Fix Released
Status in Linaro Linux:
  Fix Committed
Status in OEM Priority Project:
  Fix Released
Status in OEM Priority Project maverick series:
  Fix Released
Status in OEM Priority Project natty series:
  Fix Released
Status in OEM Priority Project oneiric series:
  Fix Released
Status in “linux-ti-omap4” package in Ubuntu:
  Fix Released
Status in “linux-ti-omap4” source package in Maverick:
  Fix Released
Status in “linux-ti-omap4” source package in Natty:
  Fix Released
Status in “linux-ti-omap4” source package in Oneiric:
  Fix Released

Bug description:
  Original Bug name: "panda: USB disk IO slow"

  This bug effects ARM Cortex A9 cores, snowball, nvidia, OMAP 4, and
  other Cortex A9 processors.  Problem is in Fedora ARM builds also so
  not limited to Ubuntu.

  My Panda's USB seems to be significantly slower than a Beagle C4.

  hdparm shows buffered reads as ~12MB/s on the Panda, and about ~20-25MB/s on a Beagle C4 from the same
  external Lacie USB disk.

  Kernel is 2.6.37-1002-linaro-omap

  Disk shows as:

  [    5.170440] scsi 0:0:0:0: Direct-Access     LaCie    d2 quadra             PQ: 0 ANSI: 4
  [    5.172546] sd 0:0:0:0: Attached scsi generic sg0 type 0
  [    5.175415] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)

  The board is otherwise idle during the test.

  Doing perf_2.6.37-12 record -a dd if=/dev/sda of=/dev/null bs=4096
  count=100000

  shows :
      81.41%         swapper  [kernel.kallsyms]     [k] default_idle
       6.33%              dd  [kernel.kallsyms]     [k] __copy_to_user
       0.94%         swapper  [kernel.kallsyms]     [k] cpu_idle
       0.51%              dd  [kernel.kallsyms]     [k] __make_request
       0.51%  perf_2.6.37-12  [kernel.kallsyms]     [k] __copy_from_user

  which suggests it's not CPU constrained.

  Dave

To manage notifications about this bug go to:
https://bugs.launchpad.net/linaro-ubuntu/+bug/709245/+subscriptions