linaro-pkg team mailing list archive

[John Rigby <john.rigby@xxxxxxxxxxxxx>]

** Changed in: u-boot-linaro
       Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Linaro
Maintainers, which is the registrant for Linaro Linux.
https://bugs.launchpad.net/bugs/803142

Title:
  Beagle RC builds fails at u-boot/kernel boundary

Status in Linaro Android:
  Fix Released
Status in Linaro Linux:
  Invalid
Status in Linaro U-Boot:
  Fix Released

Bug description:
  Android Generic Beagle
  https://android-build.linaro.org/builds/~patrik-ryd/dev1106genericb/

  fails to boot the kernel. It hangs here:

  
  $cat minicom_beagle.txt

  
  Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
  Reading boot sector
  Loading u-boot.bin from mmc

  
  U-Boot 2011.06-rc3-00021-gb80e315 (Jun 28 2011 - 13:13:37)

  OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
  OMAP3 Beagle board + LPDDR/NAND
  I2C:   ready
  DRAM:  256 MiB
  NAND:  256 MiB
  MMC:   OMAP SD/MMC: 0
  *** Warning - bad CRC, using default environment

  In:    serial
  Out:   serial
  Err:   serial
  Beagle Rev C4
  timed out in wait_for_pin: I2C_STAT=0
  I2C read: I/O error
  Unrecognized expansion board: 0
  Die ID #716400240000000004039f220201b020
  Hit any key to stop autoboot:  0 
  SD/MMC found on device 0
  reading uEnv.txt

  ** Unable to read "uEnv.txt" from mmc 0:1 **
  reading uImage

  3494652 bytes read
  Booting from mmc ...
  ## Booting kernel from Legacy Image at 82000000 ...
     Image Name:   Linux-2.6.38.7-g5b2e099
     Image Type:   ARM Linux Kernel Image (uncompressed)
     Data Size:    3494588 Bytes = 3.3 MiB
     Load Address: 80008000
     Entry Point:  80008000
     Verifying Checksum ... OK
     Loading Kernel Image ... OK
  OK

  Starting kernel ...

  Uncompressing Linux... done, booting the kernel.


  and

  
  here


  $cat minicom_beagle_xm.txt

  
  Texas Instruments X-Loader 1.4.4ss (Mar  8 2011 - 08:51:11)
  Beagle xM
  Reading boot sector
  Loading u-boot.bin from mmc

  
  U-Boot 2011.06-rc3-00021-gb80e315 (Jun 28 2011 - 13:13:37)

  OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
  OMAP3 Beagle board + LPDDR/NAND
  I2C:   ready
  DRAM:  512 MiB
  NAND:  0 MiB
  MMC:   OMAP SD/MMC: 0
  *** Warning - readenv() failed, using default environment

  In:    serial
  Out:   serial
  Err:   serial
  Beagle unknown 0x02
  No EEPROM on expansion board
  Die ID #4bac00029ff800000160a7450701c00a
  Hit any key to stop autoboot:  0 
  SD/MMC found on device 0
  reading uEnv.txt

  ** Unable to read "uEnv.txt" from mmc 0:1 **
  reading uImage

  3494652 bytes read
  Booting from mmc ...
  ## Booting kernel from Legacy Image at 82000000 ...
     Image Name:   Linux-2.6.38.7-g5b2e099
     Image Type:   ARM Linux Kernel Image (uncompressed)
     Data Size:    3494588 Bytes = 3.3 MiB
     Load Address: 80008000
     Entry Point:  80008000
     Verifying Checksum ... OK
     Loading Kernel Image ... OK
  OK

  Starting kernel ...

  Uncompressing Linux... done, booting the kernel.

To manage notifications about this bug go to:
https://bugs.launchpad.net/linaro-android/+bug/803142/+subscriptions