linaro-release team mailing list archive
-
linaro-release team
-
Mailing list archive
-
Message #00266
[Bug 788896] Re: Can't boot image created from panda-x11-base hwpack and linaro-n-ubuntu-desktop on Pandaboard A2
Paul, this may be bug 746133.
Now about this bug, flashed 4 different SD cards with hwpack_linaro-
panda_20110526-1_armel_supported.tar.gz and linaro-natty-nano-
tar-20110526-0.tar.gz (kingston class 4, micro center class 6, patriot
lx class 10, patriot class4) and only 2 worked with my A2 (micro center
and patriot lx). Interesting enough that all 4 cards worked fine with A1
and EA1, so it could be a hardware problem.
** Changed in: linaro-images
Status: New => Incomplete
--
You received this bug notification because you are a member of Linaro
Release Team, which is a direct subscriber.
https://bugs.launchpad.net/bugs/788896
Title:
Can't boot image created from panda-x11-base hwpack and linaro-n
-ubuntu-desktop on Pandaboard A2
Status in Linaro Image Builds:
Incomplete
Bug description:
Created an image using the 11.05 release candidate based on
panda-x11-base and linaro-n-ubuntu-desktop and I'm unable to boot with
my Pandaboard A2.
Same SD card works fine with my EA1 and A1 Pandaboards.
Command used to create the image:
$ sudo linaro-media-create --mmc /dev/sdb --dev panda --rootfs ext3 --hwpack hwpack_linaro-panda-x11-base_20110526-0_armel_supported.tar.gz --binary linaro-n-ubuntu-desktop-tar-20110526-0.tar.gz --hwpack-force-yes
Hwpack: http://releases.linaro.org/platform/linaro-n/hwpacks/latest/hwpack_linaro-panda-x11-base_20110526-0_armel_supported.tar.gz
Image: http://releases.linaro.org/platform/linaro-n/ubuntu-desktop/latest/linaro-n-ubuntu-desktop-tar-20110526-0.tar.gz
Seems that even X-Loader is not able to initialize, as I can't see any
serial nor LED activity.