← Back to team overview

lubuntu-desktop team mailing list archive

Testing alpha2 on msi wind U100

 

Hai all,

Its working very well, After the first time booting I had an error while
login,there was something with the startlxde.What I did was changing Desktop
session from default to Lubuntu.

I remember  the Ubuntu Koala Karmic had some display problem with Msi Wind.
It was the backlight
that starts flickering.. I realize here was the same problem but it was only
for couple of seconds after the boot.

And in the Koala Karmic there was some problem too with  detecting devices
on usb... but here It didnt notice of it....

About the Wicd, Its still a problem connecting WIFI,I still got that "cannot
obtain IP adress" in WEP mode.

I plugged my modem Huawei E220 in my netbook. And it was detected. But I
dont know no anymore
how to use vwdial but It would be nice there is some thing to use it to
connect my 3G modem....

Bluetooth I switched on but no sign of blue in the corner... So I have to
install to progam... any suggestion please...

Further as netbook user I am very satified with the this Alpha stage 2.
Normally I really relay WIFI,my modem 3G and bluetooth. If hope these 3
things can be fixed or can be more improved. There are 3 files attached with
technical info's.I hope it will be enough to get Lubuntu better....

keep up the good work

Regards Josef A. Beroeat
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-11-generic (buildd@palmer) (gcc version 4.4.3 20100116 (prerelease) (Ubuntu 4.4.2-9ubuntu4) ) #15-Ubuntu SMP Tue Jan 19 18:16:27 UTC 2010 (Ubuntu 2.6.32-11.15-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f5b2000 (usable)
[    0.000000]  BIOS-e820: 000000007f5b2000 - 000000007f5d5000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f5d5000 - 000000007f5e6000 (reserved)
[    0.000000]  BIOS-e820: 000000007f5e6000 - 000000007f5e9000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f5e9000 - 000000007f605000 (reserved)
[    0.000000]  BIOS-e820: 000000007f605000 - 000000007f606000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f606000 - 000000007f608000 (reserved)
[    0.000000]  BIOS-e820: 000000007f608000 - 000000007f611000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f611000 - 000000007f617000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f617000 - 000000007f700000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x7f5b2 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DBFFF write-protect
[    0.000000]   DC000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask 080000000 write-back
[    0.000000]   1 base 07F700000 mask 0FFF00000 uncachable
[    0.000000]   2 base 07F800000 mask 0FF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009ec00 (usable)
[    0.000000]  modified: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f5b2000 (usable)
[    0.000000]  modified: 000000007f5b2000 - 000000007f5d5000 (ACPI NVS)
[    0.000000]  modified: 000000007f5d5000 - 000000007f5e6000 (reserved)
[    0.000000]  modified: 000000007f5e6000 - 000000007f5e9000 (ACPI NVS)
[    0.000000]  modified: 000000007f5e9000 - 000000007f605000 (reserved)
[    0.000000]  modified: 000000007f605000 - 000000007f606000 (ACPI NVS)
[    0.000000]  modified: 000000007f606000 - 000000007f608000 (reserved)
[    0.000000]  modified: 000000007f608000 - 000000007f611000 (ACPI data)
[    0.000000]  modified: 000000007f611000 - 000000007f617000 (ACPI NVS)
[    0.000000]  modified: 000000007f617000 - 000000007f700000 (reserved)
[    0.000000]  modified: 00000000ffb00000 - 00000000ffc00000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[    0.000000] RAMDISK: 377df000 - 37fefc05
[    0.000000] Allocated new RAMDISK: 00914000 - 01124c05
[    0.000000] Move RAMDISK from 00000000377df000 - 0000000037fefc04 to 00914000 - 01124c04
[    0.000000] ACPI: RSDP 000f03c0 00024 (v02 MSI_NB)
[    0.000000] ACPI: XSDT 7f60ff10 0005C (v01 MSI_NB MEGABOOK 06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 7f5e6c10 000F4 (v04 MSI_NB MEGABOOK 06222004 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 7F611E40/000000007F611D40, using 32 (20090903/tbfadt-486)
[    0.000000] ACPI: DSDT 7f608010 053CA (v01 MSI_NB MEGABOOK 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 7f611e40 00040
[    0.000000] ACPI: APIC 7f610e90 0005C (v02 MSI_NB MEGABOOK 06222004 MSFT 00010013)
[    0.000000] ACPI: MCFG 7f615c90 0003C (v01 MSI_NB MEGABOOK 06222004 MSFT 00000097)
[    0.000000] ACPI: SLIC 7f612c10 00176 (v01 MSI_NB MEGABOOK 06222004 MSFT 00000097)
[    0.000000] ACPI: SSDT 7f605510 004CE (v02  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 7f5e8a10 00232 (v02  PmRef  Cpu0Tst 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 7f611a10 000A0 (v02  PmRef  Cpu1Tst 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1149MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00011000 - 00017f00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 000090ff98]    TEXT DATA BSS ==> [0000100000 - 000090ff98]
[    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
[    0.000000]   #5 [0000910000 - 00009131cc]              BRK ==> [0000910000 - 00009131cc]
[    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
[    0.000000]   #7 [0000914000 - 0001124c05]      NEW RAMDISK ==> [0000914000 - 0001124c05]
[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f5b2
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0007f5b2
[    0.000000] On node 0 totalpages: 521536
[    0.000000] free_area_init_node: node 0, pgdat c07cd060, node_mem_map c1126200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2300 pages used for memmap
[    0.000000]   HighMem zone: 292024 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7f700000 (gap: 7f700000:80400000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s35896 r0 d21448 u2097152
[    0.000000] pcpu-alloc: s35896 r0 d21448 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517460
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-11-generic root=UUID=c8b8ae1b-a685-49ac-9386-9311940a38fd ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10432680 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f5b2)
[    0.000000] Memory: 2041056k/2086600k available (4777k kernel code, 44016k reserved, 2227k data, 660k init, 1177296k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07d8000 - 0xc087d000   ( 660 kB)
[    0.000000]       .data : 0xc05aa54f - 0xc07d7468   (2227 kB)
[    0.000000]       .text : 0xc0100000 - 0xc05aa54f   (4777 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:424
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1599.797 MHz processor.
[    0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.59 BogoMIPS (lpj=6399188)
[    0.004046] Security Framework initialized
[    0.004087] AppArmor: AppArmor initialized
[    0.004104] Mount-cache hash table entries: 512
[    0.004354] Initializing cgroup subsys ns
[    0.004364] Initializing cgroup subsys cpuacct
[    0.004375] Initializing cgroup subsys memory
[    0.004390] Initializing cgroup subsys devices
[    0.004396] Initializing cgroup subsys freezer
[    0.004402] Initializing cgroup subsys net_cls
[    0.004440] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.004447] CPU: L2 cache: 512K
[    0.004453] CPU: Physical Processor ID: 0
[    0.004458] CPU: Processor Core ID: 0
[    0.004465] mce: CPU supports 5 MCE banks
[    0.004482] CPU0: Thermal monitoring enabled (TM2)
[    0.004491] using mwait in idle threads.
[    0.004503] Performance Events: Atom events, Intel PMU driver.
[    0.004521] ... version:                3
[    0.004526] ... bit width:              40
[    0.004530] ... generic registers:      2
[    0.004536] ... value mask:             000000ffffffffff
[    0.004541] ... max period:             000000007fffffff
[    0.004546] ... fixed-purpose events:   3
[    0.004551] ... event mask:             0000000700000003
[    0.004560] Checking 'hlt' instruction... OK.
[    0.024018] ACPI: Core revision 20090903
[    0.039239] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.039250] ftrace: allocating 22759 entries in 45 pages
[    0.040389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.080580] CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] Calibrating delay using timer specific routine.. 3200.19 BogoMIPS (lpj=6400393)
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[    0.008000] CPU: L2 cache: 512K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 0
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.168149] CPU1: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
[    0.168180] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.172033] Brought up 2 CPUs
[    0.172041] Total of 2 processors activated (6399.79 BogoMIPS).
[    0.172278] CPU0 attaching sched-domain:
[    0.172288]  domain 0: span 0-1 level SIBLING
[    0.172294]   groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[    0.172308]   domain 1: span 0-1 level MC
[    0.172314]    groups: 0-1 (cpu_power = 1178)
[    0.172328] CPU1 attaching sched-domain:
[    0.172333]  domain 0: span 0-1 level SIBLING
[    0.172338]   groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[    0.172350]   domain 1: span 0-1 level MC
[    0.172355]    groups: 0-1 (cpu_power = 1178)
[    0.172754] devtmpfs: initialized
[    0.173565] regulator: core version 0.5
[    0.173601] Time:  7:48:44  Date: 01/26/10
[    0.173697] NET: Registered protocol family 16
[    0.173960] EISA bus registered
[    0.173981] ACPI: bus type pci registered
[    0.174114] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.174122] PCI: Not using MMCONFIG.
[    0.258768] PCI: Using configuration type 1 for base access
[    0.258895] Trying to unpack rootfs image as initramfs...
[    0.268457] bio: create slab <bio-0> at 0
[    0.270077] ACPI: EC: Look up EC in DSDT
[    0.273401] ACPI: Executed 1 blocks of module-level executable AML code
[    0.279718] ACPI: BIOS _OSI(Linux) query ignored
[    0.285681] ACPI: Interpreter enabled
[    0.285712] ACPI: (supports S0 S1 S3 S4 S5)
[    0.285789] ACPI: Using IOAPIC for interrupt routing
[    0.285916] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.286355] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.286363] PCI: Using MMCONFIG for extended config space
[    0.296815] ACPI: EC: GPE storm detected, transactions will use polling mode
[    0.312668] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.313291] ACPI: No dock devices found.
[    0.314074] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.314271] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfe80000-0xdfefffff]
[    0.314286] pci 0000:00:02.0: reg 14 io port: [0xd0f0-0xd0f7]
[    0.314298] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff]
[    0.314311] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdff00000-0xdff3ffff]
[    0.314381] pci 0000:00:02.1: reg 10 32bit mmio: [0xdfe00000-0xdfe7ffff]
[    0.314521] pci 0000:00:1b.0: reg 10 64bit mmio: [0xffe00000-0xffe03fff]
[    0.314594] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.314605] pci 0000:00:1b.0: PME# disabled
[    0.314707] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.314717] pci 0000:00:1c.0: PME# disabled
[    0.314819] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.314829] pci 0000:00:1c.1: PME# disabled
[    0.314908] pci 0000:00:1d.0: reg 20 io port: [0xd080-0xd09f]
[    0.314986] pci 0000:00:1d.1: reg 20 io port: [0xd060-0xd07f]
[    0.315064] pci 0000:00:1d.2: reg 20 io port: [0xd040-0xd05f]
[    0.315141] pci 0000:00:1d.3: reg 20 io port: [0xd020-0xd03f]
[    0.315225] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdff40000-0xdff403ff]
[    0.315299] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.315310] pci 0000:00:1d.7: PME# disabled
[    0.315513] pci 0000:00:1f.0: Force enabled HPET at 0xfed03000
[    0.315532] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.315544] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[    0.315555] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 004c (mask 0007)
[    0.315642] pci 0000:00:1f.2: reg 10 io port: [0xd0e0-0xd0e7]
[    0.315656] pci 0000:00:1f.2: reg 14 io port: [0xd0d0-0xd0d3]
[    0.315670] pci 0000:00:1f.2: reg 18 io port: [0xd0c0-0xd0c7]
[    0.315683] pci 0000:00:1f.2: reg 1c io port: [0xd0b0-0xd0b3]
[    0.315697] pci 0000:00:1f.2: reg 20 io port: [0xd0a0-0xd0af]
[    0.315737] pci 0000:00:1f.2: PME# supported from D3hot
[    0.315747] pci 0000:00:1f.2: PME# disabled
[    0.315815] pci 0000:00:1f.3: reg 20 io port: [0xd000-0xd01f]
[    0.315923] pci 0000:01:00.0: reg 10 io port: [0xc000-0xc0ff]
[    0.315955] pci 0000:01:00.0: reg 18 64bit mmio pref: [0xffd10000-0xffd10fff]
[    0.315979] pci 0000:01:00.0: reg 20 64bit mmio pref: [0xffd00000-0xffd0ffff]
[    0.316026] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfd00000-0xdfd0ffff]
[    0.316090] pci 0000:01:00.0: supports D1 D2
[    0.316098] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.316110] pci 0000:01:00.0: PME# disabled
[    0.316197] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
[    0.316208] pci 0000:00:1c.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
[    0.316222] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xffd00000-0xffdfffff]
[    0.316300] pci 0000:02:00.0: reg 10 io port: [0xb000-0xb0ff]
[    0.316316] pci 0000:02:00.0: reg 14 32bit mmio: [0xdfc00000-0xdfc03fff]
[    0.316403] pci 0000:02:00.0: supports D1 D2
[    0.316411] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.316422] pci 0000:02:00.0: PME# disabled
[    0.316502] pci 0000:00:1c.1: bridge io port: [0xb000-0xbfff]
[    0.316512] pci 0000:00:1c.1: bridge 32bit mmio: [0xdfc00000-0xdfcfffff]
[    0.316593] pci 0000:00:1e.0: transparent bridge
[    0.316630] pci_bus 0000:00: on NUMA node 0
[    0.316650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.317170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.317361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.347161] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.347459] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.347753] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.348075] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.348370] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.348667] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.348957] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.349247] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.349580] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.349610] vgaarb: loaded
[    0.349955] SCSI subsystem initialized
[    0.350194] libata version 3.00 loaded.
[    0.350442] usbcore: registered new interface driver usbfs
[    0.350486] usbcore: registered new interface driver hub
[    0.350570] usbcore: registered new device driver usb
[    0.351209] ACPI: WMI: Mapper loaded
[    0.351217] PCI: Using ACPI for IRQ routing
[    0.351596] NetLabel: Initializing
[    0.351603] NetLabel:  domain hash size = 128
[    0.351609] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.351642] NetLabel:  unlabeled traffic allowed by default
[    0.351914] hpet clockevent registered
[    0.351923] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.351936] hpet0: at MMIO 0xfed03000, IRQs 2, 8, 0
[    0.351952] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.356326] Switching to clocksource tsc
[    0.360957] AppArmor: AppArmor Filesystem Enabled
[    0.361000] pnp: PnP ACPI init
[    0.361039] ACPI: bus type pnp registered
[    0.373113] pnp: PnP ACPI: found 11 devices
[    0.373123] ACPI: ACPI bus type pnp unregistered
[    0.373134] PnPBIOS: Disabled by ACPI PNP
[    0.373179] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[    0.373191] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.373201] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.373212] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.373240] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[    0.373263] system 00:09: ioport range 0x400-0x47f has been reserved
[    0.373273] system 00:09: ioport range 0x1180-0x119f has been reserved
[    0.373283] system 00:09: ioport range 0x500-0x53f has been reserved
[    0.373294] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.373305] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.373315] system 00:09: iomem range 0xfed20000-0xfed23fff has been reserved
[    0.373339] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[    0.373349] system 00:09: iomem range 0xfc800400-0xfc800fff has been reserved
[    0.408497] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.408511] pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
[    0.408524] pci 0000:00:1c.0:   MEM window: 0xdfd00000-0xdfdfffff
[    0.408536] pci 0000:00:1c.0:   PREFETCH window: 0x000000ffd00000-0x000000ffdfffff
[    0.408550] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[    0.408559] pci 0000:00:1c.1:   IO window: 0xb000-0xbfff
[    0.408571] pci 0000:00:1c.1:   MEM window: 0xdfc00000-0xdfcfffff
[    0.408582] pci 0000:00:1c.1:   PREFETCH window: 0x00000080000000-0x000000801fffff
[    0.408596] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.408603] pci 0000:00:1e.0:   IO window: disabled
[    0.408614] pci 0000:00:1e.0:   MEM window: disabled
[    0.408622] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.408656]   alloc irq_desc for 16 on node -1
[    0.408664]   alloc kstat_irqs on node -1
[    0.408682] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.408694] pci 0000:00:1c.0: setting latency timer to 64
[    0.408713]   alloc irq_desc for 17 on node -1
[    0.408719]   alloc kstat_irqs on node -1
[    0.408731] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.408742] pci 0000:00:1c.1: setting latency timer to 64
[    0.408757] pci 0000:00:1e.0: setting latency timer to 64
[    0.408768] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.408777] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.408786] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.408795] pci_bus 0000:01: resource 1 mem: [0xdfd00000-0xdfdfffff]
[    0.408804] pci_bus 0000:01: resource 2 pref mem [0xffd00000-0xffdfffff]
[    0.408814] pci_bus 0000:02: resource 0 io:  [0xb000-0xbfff]
[    0.408822] pci_bus 0000:02: resource 1 mem: [0xdfc00000-0xdfcfffff]
[    0.408831] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
[    0.408841] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.408849] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[    0.408952] NET: Registered protocol family 2
[    0.409247] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.410168] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.411360] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.411915] TCP: Hash tables configured (established 131072 bind 65536)
[    0.411924] TCP reno registered
[    0.412285] NET: Registered protocol family 1
[    0.412350] pci 0000:00:02.0: Boot video device
[    0.413172] cpufreq-nforce2: No nForce2 chipset.
[    0.413254] Scanning for low memory corruption every 60 seconds
[    0.413575] audit: initializing netlink socket (disabled)
[    0.413602] type=2000 audit(1264492124.410:1): initialized
[    0.435692] highmem bounce pool size: 64 pages
[    0.435710] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.440843] VFS: Disk quotas dquot_6.5.2
[    0.441042] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.443113] fuse init (API version 7.13)
[    0.443408] msgmni has been set to 1689
[    0.444078] alg: No test for stdrng (krng)
[    0.444114] io scheduler noop registered
[    0.444121] io scheduler anticipatory registered
[    0.444128] io scheduler deadline registered
[    0.444288] io scheduler cfq registered (default)
[    0.444632]   alloc irq_desc for 24 on node -1
[    0.444642]   alloc kstat_irqs on node -1
[    0.444668] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.444687] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.444945]   alloc irq_desc for 25 on node -1
[    0.444952]   alloc kstat_irqs on node -1
[    0.444969] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.444984] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.445198] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.445235] Firmware did not grant requested _OSC control
[    0.445278] Firmware did not grant requested _OSC control
[    0.445374] Firmware did not grant requested _OSC control
[    0.445413] Firmware did not grant requested _OSC control
[    0.445459] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.451046] ACPI: AC Adapter [ADP1] (on-line)
[    0.451283] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/PNP0C09:00/PNP0C0D:00/input/input0
[    0.458962] ACPI: Lid Switch [LID0]
[    0.459164] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.459176] ACPI: Power Button [PWRB]
[    0.459322] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.459332] ACPI: Sleep Button [SLPB]
[    0.459477] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.459486] ACPI: Power Button [PWRF]
[    0.461274] ACPI: SSDT 7f5e8c90 00253 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.462543] ACPI: SSDT 7f5e7690 00653 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.469497] Monitor-Mwait will be used to enter C-1 state
[    0.469596] Monitor-Mwait will be used to enter C-2 state
[    0.469675] Monitor-Mwait will be used to enter C-3 state
[    0.469698] Marking TSC unstable due to TSC halts in idle
[    0.469861] processor LNXCPU:00: registered as cooling_device0
[    0.470792] ACPI: SSDT 7f5e8f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.470792] ACPI: SSDT 7f611b10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.470992] Switching to clocksource hpet
[    0.480677] processor LNXCPU:01: registered as cooling_device1
[    0.505296] thermal LNXTHERM:01: registered as thermal_zone0
[    0.505325] ACPI: Thermal Zone [THRM] (64 C)
[    0.510542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.512790] ACPI: Battery Slot [BAT1] (battery present)
[    0.512869] isapnp: Scanning for PnP cards...
[    0.514575] brd: module loaded
[    0.516017] loop: module loaded
[    0.516307] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    0.516656] ata_piix 0000:00:1f.2: version 2.13
[    0.516690]   alloc irq_desc for 19 on node -1
[    0.516697]   alloc kstat_irqs on node -1
[    0.516715] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.516727] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.673693] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.692683] scsi0 : ata_piix
[    0.736401] scsi1 : ata_piix
[    0.736543] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd0a0 irq 14
[    0.736553] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd0a8 irq 15
[    0.739188] Fixed MDIO Bus: probed
[    0.739298] PPP generic driver version 2.4.2
[    0.739439] tun: Universal TUN/TAP device driver, 1.6
[    0.739446] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    0.739715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.739775]   alloc irq_desc for 23 on node -1
[    0.739783]   alloc kstat_irqs on node -1
[    0.739799] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.739834] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.739843] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.739945] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.739988] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.740008] ehci_hcd 0000:00:1d.7: debug port 1
[    0.743908] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.748207] Freeing initrd memory: 8259k freed
[    0.756386] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff40000
[    0.773032] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.773349] usb usb1: configuration #1 chosen from 1 choice
[    0.773437] hub 1-0:1.0: USB hub found
[    0.773467] hub 1-0:1.0: 8 ports detected
[    0.773632] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.773694] uhci_hcd: USB Universal Host Controller Interface driver
[    0.773785] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.773804] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.773812] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.773930] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.773976] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d080
[    0.774232] usb usb2: configuration #1 chosen from 1 choice
[    0.774315] hub 2-0:1.0: USB hub found
[    0.774335] hub 2-0:1.0: 2 ports detected
[    0.774444] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.774458] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.774467] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.774556] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.774610] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d060
[    0.774858] usb usb3: configuration #1 chosen from 1 choice
[    0.774937] hub 3-0:1.0: USB hub found
[    0.774956] hub 3-0:1.0: 2 ports detected
[    0.775067]   alloc irq_desc for 18 on node -1
[    0.775074]   alloc kstat_irqs on node -1
[    0.775091] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.775104] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.775113] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.775204] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.775255] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d040
[    0.775510] usb usb4: configuration #1 chosen from 1 choice
[    0.775589] hub 4-0:1.0: USB hub found
[    0.775608] hub 4-0:1.0: 2 ports detected
[    0.775714] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.775728] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.775736] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.775828] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.775880] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d020
[    0.776130] usb usb5: configuration #1 chosen from 1 choice
[    0.776211] hub 5-0:1.0: USB hub found
[    0.776229] hub 5-0:1.0: 2 ports detected
[    0.776371] i8042: PNP detection disabled
[    0.795071] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.795090] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.795340] mice: PS/2 mouse device common for all mice
[    0.795748] rtc_cmos 00:04: RTC can wake from S4
[    0.795856] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.795896] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.796228] device-mapper: uevent: version 1.0.3
[    0.809209] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    0.827738] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[    0.827937] device-mapper: multipath: version 1.1.0 loaded
[    0.827945] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.828326] EISA: Probing bus 0 at eisa.0
[    0.828370] EISA: Detected 0 cards.
[    0.828797] cpuidle: using governor ladder
[    0.829139] cpuidle: using governor menu
[    0.830487] TCP cubic registered
[    0.830982] NET: Registered protocol family 10
[    0.832259] lo: Disabled Privacy Extensions
[    0.833180] NET: Registered protocol family 17
[    0.834475] Using IPI No-Shortcut mode
[    0.834723] PM: Resume from disk failed.
[    0.834752] registered taskstats version 1
[    0.835290]   Magic number: 10:450:825
[    0.835419] rtc_cmos 00:04: setting system clock to 2010-01-26 07:48:45 UTC (1264492125)
[    0.835428] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.835434] EDD information not available.
[    0.871266] isapnp: No Plug & Play device found
[    0.977923] ata1.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
[    0.977940] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.985603] ata1.00: configured for UDMA/133
[    0.985976] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-2 01.0 PQ: 0 ANSI: 5
[    0.986288] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    0.986352] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.986474] sd 0:0:0:0: [sda] Write Protect is off
[    0.986482] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.986558] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.986923]  sda: sda1 sda2 < sda5 sda6 >
[    1.022220] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.022268] Freeing unused kernel memory: 660k freed
[    1.022855] Write protecting the kernel text: 4780k
[    1.022930] Write protecting the kernel read-only data: 1916k
[    1.053262] udev: starting version 149
[    1.084130] usb 1-5: new high speed USB device using ehci_hcd and address 2
[    1.138213] xor: automatically using best checksumming function: pIII_sse
[    1.156064]    pIII_sse  :  3370.000 MB/sec
[    1.156074] xor: using function: pIII_sse (3370.000 MB/sec)
[    1.174918] device-mapper: dm-raid45: initialized v0.2594b
[    1.386890] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.386937] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.387008] r8169 0000:01:00.0: setting latency timer to 64
[    1.387078]   alloc irq_desc for 26 on node -1
[    1.387087]   alloc kstat_irqs on node -1
[    1.387117] r8169 0000:01:00.0: irq 26 for MSI/MSI-X
[    1.389044] eth0: RTL8102e at 0xf809e000, 00:21:85:4c:68:25, XID 14a00000 IRQ 26
[    1.479686] usb 1-5: configuration #1 chosen from 1 choice
[    1.624091] usb 1-6: new high speed USB device using ehci_hcd and address 3
[    1.739092] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    1.774937] usb 1-6: configuration #1 chosen from 1 choice
[    3.326013] udev: starting version 149
[    3.440779] Adding 4490128k swap on /dev/sda5.  Priority:-1 extents:1 across:4490128k 
[    4.084227] Initializing USB Mass Storage driver...
[    4.084581] scsi2 : SCSI emulation for USB Mass Storage devices
[    4.085292] usbcore: registered new interface driver usb-storage
[    4.085306] USB Mass Storage support registered.
[    4.086605] usb-storage: device found at 3
[    4.086614] usb-storage: waiting for device to settle before scanning
[    4.139353] rtl8187se: module is from the staging directory, the quality is unknown, you have been warned.
[    4.150982] ieee80211_crypt: registered algorithm 'NULL'
[    4.150994] ieee80211_crypt: registered algorithm 'TKIP'
[    4.151002] ieee80211_crypt: registered algorithm 'CCMP'
[    4.151009] ieee80211_crypt: registered algorithm 'WEP'
[    4.151015] 
[    4.151017] Linux kernel driver for RTL8180 / RTL8185 based WLAN cards
[    4.151024] Copyright (c) 2004-2005, Andrea Merello
[    4.151029] r8180: Initializing module
[    4.151035] r8180: Wireless extensions version 22
[    4.151041] r8180: Initializing proc filesystem
[    4.151116] r8180: Configuring chip resources
[    4.151147] r8180 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    4.151161] r8180 0000:02:00.0: setting latency timer to 64
[    4.159930] Linux video capture interface: v2.00
[    4.162123] r8180: Channel plan is 2
[    4.162130] 
[    4.162138] Dot11d_Init()
[    4.162149] r8180: MAC controller is a RTL8187SE b/g
[    4.162155] r8180: This is a PCI NIC
[    4.164579] r8180: usValue is 0x100
[    4.164583] 
[    4.198328] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0203)
[    4.220530] r8180: EEPROM version 104
[    4.225394] r8180: WW:**PLEASE** REPORT SUCCESSFUL/UNSUCCESSFUL TO Realtek!
[    4.225848] input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input6
[    4.226034] usbcore: registered new interface driver uvcvideo
[    4.226045] USB Video Class driver (v0.1.0)
[    4.236028] r8180: IRQ 17
[    4.238492] r8180: Driver probe completed
[    4.238498] 
[    4.245399] acpi device:1a: registered as cooling_device2
[    4.245745] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    4.245906] ACPI: Video Device [IGD] (multi-head: yes  rom: no  post: no)
[    4.404200] type=1505 audit(1264492129.068:2):  operation="profile_load" pid=773 name="/sbin/dhclient3"
[    4.404795] type=1505 audit(1264492129.068:3):  operation="profile_load" pid=773 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    4.405188] type=1505 audit(1264492129.068:4):  operation="profile_load" pid=773 name="/usr/lib/connman/scripts/dhclient-script"
[    4.509195] psmouse serio1: ID: 10 00 64
[    4.574890] intel_rng: FWH not detected
[    4.601351] Linux agpgart interface v0.103
[    4.644201] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    4.644731] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[    4.650620] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    4.680042] lp: driver loaded but no devices found
[    4.810144] Finger Sensing Pad, hw: 12.0.1, sw: 1.0.0-K, buttons: 2
[    4.834839] [drm] Initialized drm 1.1.0 20060810
[    5.037767] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.037783] i915 0000:00:02.0: setting latency timer to 64
[    5.058109] [drm] set up 7M of stolen space
[    5.161662] integrated sync not supported
[    5.480392] input: FSPPS/2 Sentelic FingerSensingPad as /devices/platform/i8042/serio1/input/input8
[    5.496150] Skipping EDID probe due to cached edid
[    5.501996] fb0: inteldrmfb frame buffer device
[    5.502004] registered panic notifier
[    5.502022] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.659341] vga16fb: initializing
[    5.659355] vga16fb: mapped to 0xc00a0000
[    5.659857] fb1: VGA16 VGA frame buffer device
[    5.846373] [drm] LVDS-8: set mode 1024x600 e
[    5.897655] r8180: Bringing up iface
[    5.913425] Console: switching to colour frame buffer device 128x37
[    6.096153] r8180: Card successfully reset
[    6.832656] r8180: WIRELESS_MODE_G
[    6.832660] 
[    6.849658] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    6.850025] r8169: eth0: link down
[    6.850571] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.944365] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.944441] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.067926] hda_codec: ALC1200: BIOS auto-probing.
[    7.068959] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[    7.248563] EXT4-fs (sda6): mounted filesystem with ordered data mode
[    7.320605] type=1503 audit(1264492131.984:5):  operation="capable" pid=977 parent=976 profile="/sbin/dhclient3" name="net_admin"
[    8.603985] type=1503 audit(1264492133.265:6):  operation="capable" pid=1164 parent=1163 profile="/sbin/dhclient3" name="net_admin"
[    8.715055] type=1505 audit(1264492133.376:7):  operation="profile_replace" pid=1175 name="/sbin/dhclient3"
[    8.715918] type=1505 audit(1264492133.376:8):  operation="profile_replace" pid=1175 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    8.716433] type=1505 audit(1264492133.380:9):  operation="profile_replace" pid=1175 name="/usr/lib/connman/scripts/dhclient-script"
[    8.788714] type=1505 audit(1264492133.452:10):  operation="profile_load" pid=1177 name="/usr/sbin/tcpdump"
[    9.088433] usb-storage: device scan complete
[    9.090679] scsi 2:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    9.094887] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    9.099902] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    9.705151] type=1503 audit(1264492134.368:11):  operation="capable" pid=1265 parent=1264 profile="/sbin/dhclient3" name="net_admin"
[   10.433258] Skipping EDID probe due to cached edid
[   10.516188] Skipping EDID probe due to cached edid
[  151.409181] Skipping EDID probe due to cached edid
[  151.449253] Skipping EDID probe due to cached edid
[  151.829197] Skipping EDID probe due to cached edid
[  151.873275] Skipping EDID probe due to cached edid
[  207.638405] r8180: Bringing up iface
[  207.836957] r8180: Card successfully reset
[  208.575226] r8180: WIRELESS_MODE_G
[  208.575237] 
[  208.589951] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  208.739809] r8169: eth0: link down
[  208.740651] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  208.846527] r8180: Bringing up iface
[  209.045056] r8180: Card successfully reset
[  209.782233] r8180: WIRELESS_MODE_G
[  209.782238] 
[  209.796907] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  213.094985] Linking with meetingroom: channel is 6
[  216.200164] Linking with meetingroom: channel is 6
[  216.220626] Associated successfully
[  216.220638] Using G rates
[  216.235251] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  216.759604] type=1503 audit(1264492341.421:12):  operation="open" pid=1785 parent=1763 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[  227.016094] wlan0: no IPv6 routers present
[  249.785152] usb 2-2: new low speed USB device using uhci_hcd and address 2
[  249.951489] usb 2-2: configuration #1 chosen from 1 choice
[  250.020955] usbcore: registered new interface driver hiddev
[  250.037432] input: USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input10
[  250.038425] generic-usb 0003:15D9:0A41.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-2/input0
[  250.038537] usbcore: registered new interface driver usbhid
[  250.038716] usbhid: v2.6:USB HID core driver
[  267.952653] Linking with meetingroom: channel is 6
[  267.995546] Linking with meetingroom: channel is 6
[  268.014112] Associated successfully
[  268.014124] Using G rates
[  268.049726] Linking with meetingroom: channel is 6
[  282.529354] r8180: Bringing up iface
[  282.728075] r8180: Card successfully reset
[  283.466269] r8180: WIRELESS_MODE_G
[  283.466278] 
[  283.481176] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  283.545752] r8180: Bringing up iface
[  283.744300] r8180: Card successfully reset
[  284.482138] r8180: WIRELESS_MODE_G
[  284.482146] 
[  284.497031] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  284.608169] r8169: eth0: link down
[  284.608971] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  284.716277] r8180: Bringing up iface
[  284.914850] r8180: Card successfully reset
[  285.653224] r8180: WIRELESS_MODE_G
[  285.653233] 
[  285.668113] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  287.803066] Linking with meetingroom: channel is 6
[  287.845559] Associated successfully
[  287.845572] Using G rates
[  287.914238] Linking with meetingroom: channel is 6
[  287.954883] Linking with meetingroom: channel is 6
[  287.972278] Associated successfully
[  287.972290] Using G rates
[  287.987633] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  288.869263] type=1503 audit(1264492413.533:13):  operation="open" pid=1879 parent=1848 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[  298.956111] wlan0: no IPv6 routers present
[  324.955825] Linking with meetingroom: channel is 6
[  340.970669] uvcvideo: UVC non compliance - GET_MIN/MAX(PROBE) incorrectly supported. Enabling workaround.
[  341.004433] uvcvideo: device BisonCam, NB Pro requested null bandwidth, defaulting to lowest.
[  400.601452] r8169: eth0: link up
[  400.602240] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  400.852693] r8169: eth0: link down
[  402.509884] r8169: eth0: link up
[  410.732119] eth0: no IPv6 routers present
[  664.205422] r8180: Bringing up iface
[  664.403924] r8180: Card successfully reset
[  665.143485] r8180: WIRELESS_MODE_G
[  665.143490] 
[  665.158179] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  666.943106] r8180: Bringing up iface
[  667.141631] r8180: Card successfully reset
[  667.878582] r8180: WIRELESS_MODE_G
[  667.878587] 
[  667.893243] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  668.005566] r8169: eth0: link up
[  668.109513] r8169: eth0: link up
[  670.158309] type=1503 audit(1264492794.820:14):  operation="open" pid=2198 parent=2191 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[  678.168135] eth0: no IPv6 routers present
[  689.019241] gvfs-gdu-volume[2228]: segfault at c ip 00c5980a sp bf844e40 error 4 in libgdu.so.0.0.0[c51000+1d000]
[  748.184085] hardinfo[2387]: segfault at 0 ip 00cf4735 sp b55fe230 error 4 in benchmark.so[cee000+8000]
[ 1240.372335] gvfs-gdu-volume[2508]: segfault at c ip 0011880a sp bfb60150 error 4 in libgdu.so.0.0.0[110000+1d000]
[ 1298.048305] hardinfo[2654]: segfault at 0 ip 00ecc735 sp b5cff230 error 4 in benchmark.so[ec6000+8000]
[ 1334.835481] r8169: eth0: link down
[ 1338.621355] r8169: eth0: link down
[ 1338.622157] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1340.683805] r8180: Bringing up iface
[ 1340.882402] r8180: Card successfully reset
[ 1341.622615] r8180: WIRELESS_MODE_G
[ 1341.622627] 
[ 1341.642258] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1341.857490] r8169: eth0: link down
[ 1341.858290] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1341.950471] r8180: Bringing up iface
[ 1342.150368] r8180: Card successfully reset
[ 1342.891968] r8180: WIRELESS_MODE_G
[ 1342.891974] 
[ 1342.906674] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1343.047167] r8180: Bringing up iface
[ 1343.245759] r8180: Card successfully reset
[ 1343.982744] r8180: WIRELESS_MODE_G
[ 1343.982749] 
[ 1343.997640] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1344.204804] r8169: eth0: link down
[ 1344.206010] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1345.030663] Linking with meetingroom: channel is 6
[ 1345.049186] Associated successfully
[ 1345.049197] Using G rates
[ 1345.063827] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1345.111844] Linking with meetingroom: channel is 6
[ 1345.138105] Associated successfully
[ 1345.138117] Using G rates
[ 1346.175095] type=1503 audit(1264493470.837:15):  operation="open" pid=2758 parent=2719 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1348.067638] gvfs-gdu-volume[2765]: segfault at c ip 00c9380a sp bfd4b6d0 error 4 in libgdu.so.0.0.0[c8b000+1d000]
[ 1355.764039] wlan0: no IPv6 routers present
[ 1411.201536] r8180: Bringing up iface
[ 1411.400179] r8180: Card successfully reset
[ 1412.138031] r8180: WIRELESS_MODE_G
[ 1412.138038] 
[ 1413.133623] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1413.239047] Linking with meetingroom: channel is 6
[ 1413.264157] Associated successfully
[ 1413.264168] Using G rates
[ 1413.278293] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1413.329291] Linking with meetingroom: channel is 6
[ 1413.370024] Linking with meetingroom: channel is 6
[ 1413.451980] Linking with meetingroom: channel is 6
[ 1413.480167] Associated successfully
[ 1413.480177] Using G rates
[ 1413.635969] r8169: eth0: link down
[ 1413.636527] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1413.720548] r8180: Bringing up iface
[ 1413.919116] r8180: Card successfully reset
[ 1414.656761] r8180: WIRELESS_MODE_G
[ 1414.656768] 
[ 1414.690078] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1414.933421] r8180: Bringing up iface
[ 1415.132031] r8180: Card successfully reset
[ 1415.869744] r8180: WIRELESS_MODE_G
[ 1415.869751] 
[ 1415.898403] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1416.200142] r8169: eth0: link down
[ 1416.200683] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1416.861035] Linking with meetingroom: channel is 6
[ 1416.878156] Associated successfully
[ 1416.878167] Using G rates
[ 1416.892737] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1416.932394] Linking with meetingroom: channel is 6
[ 1416.950210] Associated successfully
[ 1416.950221] Using G rates
[ 1416.989799] type=1503 audit(1264493541.653:16):  operation="open" pid=2986 parent=2950 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1427.204014] wlan0: no IPv6 routers present
[ 1483.088813] r8180: Bringing up iface
[ 1483.287411] r8180: Card successfully reset
[ 1484.024777] r8180: WIRELESS_MODE_G
[ 1484.024782] 
[ 1484.039438] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1484.127182] Linking with meetingroom: channel is 6
[ 1484.144752] Associated successfully
[ 1484.144766] Using G rates
[ 1484.158723] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1484.189117] Linking with meetingroom: channel is 6
[ 1484.353360] r8169: eth0: link down
[ 1484.354161] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1484.417984] r8180: Bringing up iface
[ 1484.616543] r8180: Card successfully reset
[ 1485.354657] r8180: WIRELESS_MODE_G
[ 1485.354665] 
[ 1485.380339] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1485.525324] r8180: Bringing up iface
[ 1485.724046] r8180: Card successfully reset
[ 1486.460971] r8180: WIRELESS_MODE_G
[ 1486.460976] 
[ 1486.475640] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1486.671648] r8169: eth0: link down
[ 1486.673380] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1487.519444] Linking with meetingroom: channel is 6
[ 1487.536786] Associated successfully
[ 1487.536797] Using G rates
[ 1487.565926] Linking with meetingroom: channel is 6
[ 1487.566564] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1487.606935] Linking with meetingroom: channel is 6
[ 1487.633926] Linking with meetingroom: channel is 6
[ 1487.651183] Associated successfully
[ 1487.651193] Using G rates
[ 1487.664737] Associated successfully
[ 1487.664743] Using G rates
[ 1488.671127] type=1503 audit(1264493613.333:17):  operation="open" pid=3107 parent=3070 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1497.796106] wlan0: no IPv6 routers present
[ 1532.844150] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 1533.007960] usb 3-1: configuration #1 chosen from 1 choice
[ 1533.012285] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1533.013069] usb-storage: device found at 2
[ 1533.013084] usb-storage: waiting for device to settle before scanning
[ 1533.056180] usb 3-1: USB disconnect, address 2
[ 1533.792190] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 1533.954553] usb 3-1: configuration #1 chosen from 1 choice
[ 1533.963269] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1533.963795] usb-storage: device found at 3
[ 1533.963801] usb-storage: waiting for device to settle before scanning
[ 1534.048946] usbcore: registered new interface driver usbserial
[ 1534.049779] USB Serial support registered for generic
[ 1534.051924] usbcore: registered new interface driver usbserial_generic
[ 1534.051943] usbserial: USB Serial Driver core
[ 1534.069782] USB Serial support registered for GSM modem (1-port)
[ 1534.069946] option 3-1:1.0: GSM modem (1-port) converter detected
[ 1534.070210] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 1534.070249] option 3-1:1.1: GSM modem (1-port) converter detected
[ 1534.070441] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 1534.070506] usbcore: registered new interface driver option
[ 1534.070513] option: v0.7.2:USB Driver for GSM modems
[ 1538.962309] usb-storage: device scan complete
[ 1538.966939] scsi 6:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[ 1538.993259] sr0: scsi-1 drive
[ 1538.993275] Uniform CD-ROM driver Revision: 3.20
[ 1538.994343] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 1538.999728] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 1542.232178] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 1542.608580] usb 5-1: configuration #1 chosen from 1 choice
[ 1542.694724] Bluetooth: Core ver 2.15
[ 1542.695515] NET: Registered protocol family 31
[ 1542.695524] Bluetooth: HCI device and connection manager initialized
[ 1542.695533] Bluetooth: HCI socket layer initialized
[ 1542.710401] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 1542.713786] usbcore: registered new interface driver btusb
[ 1542.817287] Bluetooth: L2CAP ver 2.14
[ 1542.817296] Bluetooth: L2CAP socket layer initialized
[ 1542.865206] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1542.865217] Bluetooth: BNEP filters: protocol multicast
[ 1542.905852] Bridge firewalling registered
[ 1542.925436] Bluetooth: SCO (Voice Link) ver 0.6
[ 1542.925446] Bluetooth: SCO socket layer initialized
[ 1543.206699] Bluetooth: RFCOMM TTY layer initialized
[ 1543.206716] Bluetooth: RFCOMM socket layer initialized
[ 1543.206723] Bluetooth: RFCOMM ver 1.11
[ 1549.672187] usb 5-1: USB disconnect, address 2
[ 1549.673171] btusb_intr_complete: hci0 urb e66b9d80 failed to resubmit (19)
[ 1549.673226] btusb_bulk_complete: hci0 urb e66b9900 failed to resubmit (19)
[ 1549.674178] btusb_bulk_complete: hci0 urb e66b9500 failed to resubmit (19)
[ 1549.676064] btusb_send_frame: hci0 urb e593b600 submission failed
[ 1554.104688] r8180: Bringing up iface
[ 1554.303228] r8180: Card successfully reset
[ 1555.040147] r8180: WIRELESS_MODE_G
[ 1555.040153] 
[ 1555.054800] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1556.980237] r8169: eth0: link down
[ 1556.981061] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1557.039731] r8180: Bringing up iface
[ 1557.238245] r8180: Card successfully reset
[ 1557.976329] r8180: WIRELESS_MODE_G
[ 1557.976338] 
[ 1558.005684] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1558.149356] r8180: Bringing up iface
[ 1558.347850] r8180: Card successfully reset
[ 1559.084561] r8180: WIRELESS_MODE_G
[ 1559.084566] 
[ 1559.099216] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1559.314355] r8169: eth0: link down
[ 1559.315154] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1560.137966] Linking with meetingroom: channel is 6
[ 1560.184352] Linking with meetingroom: channel is 6
[ 1560.225304] Linking with meetingroom: channel is 6
[ 1560.252420] Linking with meetingroom: channel is 6
[ 1560.279518] Associated successfully
[ 1560.279532] Using G rates
[ 1560.293106] Associated successfully
[ 1560.293117] Using G rates
[ 1560.307256] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1561.228410] type=1503 audit(1264493685.892:18):  operation="open" pid=3340 parent=3303 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1571.092125] wlan0: no IPv6 routers present
[ 1575.693121] gvfs-gdu-volume[3352]: segfault at c ip 00c3480a sp bfb55700 error 4 in libgdu.so.0.0.0[c2c000+1d000]
[ 1629.530368] r8180: Bringing up iface
[ 1629.728893] r8180: Card successfully reset
[ 1630.466855] r8180: WIRELESS_MODE_G
[ 1630.466863] 
[ 1630.481759] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1632.341710] r8169: eth0: link down
[ 1632.342513] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1754.413366] r8180: Bringing up iface
[ 1754.611967] r8180: Card successfully reset
[ 1755.349569] r8180: WIRELESS_MODE_G
[ 1755.349576] 
[ 1755.364330] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1757.396661] r8180: Bringing up iface
[ 1757.595219] r8180: Card successfully reset
[ 1758.333014] r8180: WIRELESS_MODE_G
[ 1758.333024] 
[ 1758.347914] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1758.557337] r8169: eth0: link down
[ 1758.558140] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1758.660974] r8180: Bringing up iface
[ 1758.859520] r8180: Card successfully reset
[ 1759.598480] r8180: WIRELESS_MODE_G
[ 1759.598487] 
[ 1759.623158] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1761.743630] Linking with meetingroom: channel is 6
[ 1761.761580] Associated successfully
[ 1761.761589] Using G rates
[ 1761.791412] Linking with meetingroom: channel is 6
[ 1761.792076] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1761.832516] Linking with meetingroom: channel is 6
[ 1761.859541] Linking with meetingroom: channel is 6
[ 1761.877029] Associated successfully
[ 1761.877045] Using G rates
[ 1761.891961] Associated successfully
[ 1761.891973] Using G rates
[ 1762.895300] type=1503 audit(1264493887.557:19):  operation="open" pid=3497 parent=3479 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1772.672106] wlan0: no IPv6 routers present
[ 1825.521972] r8180: Bringing up iface
[ 1825.720527] r8180: Card successfully reset
[ 1826.457452] r8180: WIRELESS_MODE_G
[ 1826.457457] 
[ 1826.472126] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1828.328227] r8169: eth0: link down
[ 1828.329050] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1955.415054] r8180: Bringing up iface
[ 1955.613544] r8180: Card successfully reset
[ 1956.350631] r8180: WIRELESS_MODE_G
[ 1956.350636] 
[ 1956.365339] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1958.406074] r8180: Bringing up iface
[ 1958.604609] r8180: Card successfully reset
[ 1959.342325] r8180: WIRELESS_MODE_G
[ 1959.342334] 
[ 1959.357231] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1959.581371] r8169: eth0: link down
[ 1959.582172] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1959.680847] r8180: Bringing up iface
[ 1959.879401] r8180: Card successfully reset
[ 1960.617750] r8180: WIRELESS_MODE_G
[ 1960.617756] 
[ 1960.632462] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1962.761055] Linking with meetingroom: channel is 6
[ 1962.779769] Associated successfully
[ 1962.779780] Using G rates
[ 1962.808606] Linking with meetingroom: channel is 6
[ 1962.809245] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1962.849613] Linking with meetingroom: channel is 6
[ 1962.890075] Linking with meetingroom: channel is 6
[ 1962.907307] Associated successfully
[ 1962.907322] Using G rates
[ 1963.917583] type=1503 audit(1264494088.580:20):  operation="open" pid=3640 parent=3622 profile="/sbin/dhclient3" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/var/lib/wicd/dhclient.conf"
[ 1973.676111] wlan0: no IPv6 routers present
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 15d9:0a41 Dexon 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 010: ID 090c:1000 Feiya Technology Corp. Flash Drive
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. Mass Storage Device
Bus 001 Device 002: ID 5986:0203 Acer, Inc 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Follow ups