maas-devel team mailing list archive

[Andres Rodriguez <andres.rodriguez@xxxxxxxxxxxxx>]

I'm happy to announce that MAAS 1.9.0 RC 1 has been released for testing,
which focuses solely on Bug Fixes:

   - LP: #1515498  -  MAAS uses wrong IP for DNS record (creates against
   the bond).
   - LP: #1515671  -  Local archive ignored for deployment. Works for
   commissioning and enlistment.
   - LP: #1513485  -  Lease parser failure - doesn't update IP on the PXE
   NIC.
   - LP: #1514486  -  Cannot claim sticky IP address for device with parent.
   - LP: #1514883  -  Cluster downloads boot-images from managed network
   (pxe) instead of network used to connect to Region.
   - LP: #1510917  -  Updating/modifying/assigning vlans, spaces, fabrics,
   subnets doesn't allow specifying names and lock to ID's.
   - LP: #1513095  -  MAAS should prevent deploying nodes with PXE
   interface 'unconfigured'.
   - LP: #1508056  -  MTU should be a set on the VLAN, and able to override
   on the interface.
   - LP: #1439476  -  Internal Server Error when creating/editing cluster
   interface.
   - LP: #1510224  -  Non-interactive way to change password.
   - LP: #1513111  -  When a bond is created all IP address associated with
   the bond members should be removed.
   - LP: #1487135  -  MAAS does not provide a dump of the config it passes
   to curtin for networking and storage.
   - LP: #1512959  -  MAAS should not offer EXT3, rather VFAT, EXT2, EXT4.
   - LP: #1505031  -  Network constraints for juju.
   - LP: #1509535  -  Creating a partition or a Volume Group on the whole
   disk leaves free space.
   - LP: #1511493  -  Should not allow partitions to be created on bcache
   device.
   - LP: #1503475  -  Storage section should only be editable when Ready or
   Allocated.
   - LP: #1512832  -
    maasserver.api.tests.test_fannetworks.TestFanNetworksAPI.test_read fails
   randomly.
   - LP: #1508754  -  Creating a logical volume on a partition that is too
   small almost works, resulting in strange error messages.
   -
   - LP: #1503925  -  [UI] Keep selected nodes selected after action.
   - LP: #1515380  -  [UI] Refresh UI cache after an upgrade to avoid
   seeing garbage.
   - LP: #1510106  -  [UI] Boot disk is not lighted nor can be changed.
   - LP: #1510118  -  [UI] Can't remove / delete a partition with a
   filesystem under 'Available disks and partitions'.
   - LP: #1510153  -  [UI] Creating a partition should allow to select
   filesystem and mountpoint.
   - LP: #1510468  -  [UI] When selecting a device, ensure padding between
   buttons is 20px.
   - LP: #1510455  -  [UI] Misaligned mount point column on used disks
   table.
   - LP: #1510469  -  [UI] Align the individual storage actions with the
   name field, rather than the tickbox.
   - LP: #1503479  -  [UI] can't add physical interface.
   - LP: #1503474  -  [UI] Containers (lxc, kvm) data missing on node
   details.
   - LP: #1513271  -  [UI] Unable to unmount a filesystem in the UI.
   - LP: #1503536  -  [UI] Animation missing on show members and select
   node.
   - LP: #1510482  -  [UI] Add tooltips to icons.
   - LP: #1510486  -  [UI] Add tooltips to inactive buttons.



*Known Curtin Issues affecting MAAS:*
The following are known issues that affect MAAS,

   - *LP: #1512857 - Curtin fails to deploy with RAID 5 and Bcache.
   (INPROGRESS)*
      - When MAAS is configured with both RAID5 and Bcache, MAAS deployment
      will fail, but caused by curtin. This is an issue related to
Curtin rather
      than MAAS per se.


   -
   - *LP: #1514094 - Curtin fails to deploy with Bcache when using cache
   multiple times **(INPROGRESS)*
      - This issue is present when MAAS users configure a single cache
      device with multiple backing bcache devices. Curtin fails to use the same
      cache device, hence causing MAAS to fail to deploy.

   - *LP: #1514888 - curtin needs to notice that gdisk is not installed,
   and install it. **(INPROGRESS)*
      - This curtin issue prevents MAAS from successfully deploying Precise.



*Testing*
MAAS 1.9.0 RC 1 is available for testing in:

*ppa:maas/next*

Happy testing!



*Filing bugs*
Users can file bugs in [1], please use a prefix for the subject such as
[1.9rc1].

https://bugs.launchpad.net/maas/+filebug

-- 
Andres Rodriguez
Engineering Manager, MAAS & OIL DevOps
Canonical USA, Inc.