← Back to team overview

maria-developers team mailing list archive

Updated (by Guest): Table elimination (17)

 

-----------------------------------------------------------------------
                              WORKLOG TASK
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
TASK...........: Table elimination
CREATION DATE..: Sun, 10 May 2009, 19:57
SUPERVISOR.....: Monty
IMPLEMENTOR....: Psergey
COPIES TO......: 
CATEGORY.......: Server-Sprint
TASK ID........: 17 (http://askmonty.org/worklog/?tid=17)
VERSION........: Server-5.1
STATUS.........: Assigned
PRIORITY.......: 60
WORKED HOURS...: 0
ESTIMATE.......: 0 (hours remain)
ORIG. ESTIMATE.: 0

PROGRESS NOTES:

-=-=(Guest - Wed, 03 Jun 2009, 15:04)=-=-
Low Level Design modified.
--- /tmp/wklog.17.old.20378     2009-06-03 15:04:54.000000000 +0300
+++ /tmp/wklog.17.new.20378     2009-06-03 15:04:54.000000000 +0300
@@ -135,3 +135,8 @@
   Considering we've already done the join_read_const_table() call, is there any
   real difference between constant table and eliminated one? If there is, should
   we mark const tables also as eliminated?
+
+* For Multi-table UPDATEs/DELETEs, need to also analyze the SET clause:
+  - affected tables must not be eliminated
+  - tables that are used on the right side of the SET x=y assignments must 
+    not be eliminated either.

-=-=(Psergey - Wed, 03 Jun 2009, 12:07)=-=-
Dependency created: 29 now depends on 17

-=-=(Guest - Tue, 02 Jun 2009, 00:54)=-=-
Low Level Design modified.
--- /tmp/wklog.17.old.23548     2009-06-02 00:54:13.000000000 +0300
+++ /tmp/wklog.17.new.23548     2009-06-02 00:54:13.000000000 +0300
@@ -128,3 +128,10 @@
     - this is what happens for constant tables, too.
   - I don't see how showing them could be of any use. They only make it 
     harder to read the rewritten query.
+
+* Table elimination is performed after constant table detection (but before
+  the range analysis). Constant tables are technically different from 
+  eliminated ones (e.g. the former are shown in EXPLAIN and the latter aren't).
+  Considering we've already done the join_read_const_table() call, is there any
+  real difference between constant table and eliminated one? If there is, should
+  we mark const tables also as eliminated?

-=-=(Psergey - Mon, 01 Jun 2009, 20:46)=-=-
Low Level Design modified.
--- /tmp/wklog.17.old.17448     2009-06-01 20:46:40.000000000 +0300
+++ /tmp/wklog.17.new.17448     2009-06-01 20:46:40.000000000 +0300
@@ -122,3 +122,9 @@
 
   always. If we want table elimination to work in presence of grouping, need 
   to devise some other way of analyzing aggregate functions.
+
+* Should eliminated tables be shown in EXPLAIN EXTENDED? 
+  - If we just ignore the question, they will be shown
+    - this is what happens for constant tables, too.
+  - I don't see how showing them could be of any use. They only make it 
+    harder to read the rewritten query.

-=-=(Guest - Mon, 01 Jun 2009, 12:49)=-=-
Low Level Design modified.
--- /tmp/wklog.17.old.32202     2009-06-01 12:49:15.000000000 +0300
+++ /tmp/wklog.17.new.32202     2009-06-01 12:49:15.000000000 +0300
@@ -8,7 +8,7 @@
 6. Todo, issues to resolve
 6.1 To resolve
 6.2 Resolved
-
+7. Additional issues
 </contents>
 
 It's not really about elimination of tables, it's about elimination of inner
@@ -116,3 +116,9 @@
 * We remove ON clauses within semi-join nests. If these clauses contain
   subqueries, they probably should be gone from EXPLAIN output also?
 
+* Aggregate functions report they depend on all tables, that is,
+   
+     item_agg_func->used_tables() == (1ULL << join->tables) - 1
+
+  always. If we want table elimination to work in presence of grouping, need 
+  to devise some other way of analyzing aggregate functions.

-=-=(Guest - Fri, 29 May 2009, 00:45)=-=-
Low Level Design modified.
--- /tmp/wklog.17.old.1348      2009-05-29 00:45:21.000000000 +0300
+++ /tmp/wklog.17.new.1348      2009-05-29 00:45:21.000000000 +0300
@@ -111,3 +111,8 @@
   referred to an inner table (requirement for OJ->IJ conversion) then table
   elimination would not be applicable anyway.
 
+7. Additional issues
+--------------------
+* We remove ON clauses within semi-join nests. If these clauses contain
+  subqueries, they probably should be gone from EXPLAIN output also?
+

-=-=(Guest - Tue, 26 May 2009, 21:52)=-=-
Low Level Design modified.
--- /tmp/wklog.17.old.14120     2009-05-26 21:52:06.000000000 +0300
+++ /tmp/wklog.17.new.14120     2009-05-26 21:52:06.000000000 +0300
@@ -1,11 +1,14 @@
 <contents>
 1. Conditions for removal
+1.1 Quick check if there are candidates
 2. Removal operation properties
 3. Removal operation
 4. User interface
-5. Todo, issues to resolve
-5.1 To resolve
-5.2 Resolved
+5. Tests and benchmarks
+6. Todo, issues to resolve
+6.1 To resolve
+6.2 Resolved
+
 </contents>
 
 It's not really about elimination of tables, it's about elimination of inner
@@ -29,6 +32,18 @@
   GROUP BY and HAVING do not refer to the inner tables of the outer join
   nest.
 
+1.1 Quick check if there are candidates
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Before we start to enumerate join nests, here is a quick way to check if
+there *can be* something to be removed:
+
+  if ((tables used in select_list |  
+       tables used in group/order by UNION |
+       tables used in where) != bitmap_of_all_tables)
+  {
+     attempt table elimination;
+  }
+
 2. Removal operation properties
 -------------------------------
 * There is always one way to remove (no choice to remove either this or that)
@@ -56,22 +71,24 @@
 -----------------
 * We'll add an @@optimizer switch flag for table elimination. Tentative
   name: 'table_elimination'.
+  (Note ^^ utility of the above questioned ^, as table elimination can never 
+   be worse than no elimination. We're leaning towards not adding the flag)
 
-* With EXPLAIN, there are two options: 
-  - Show removed tables in a way similar to const tables, with some
-    indication that they are removed.
-  - Do not show them altogether.
-(the second one seems to be better? We're targeting a situation with VIEWs,
-where the user would not care about what tables were added into his query
-and then discarded from it?)
+* EXPLAIN will not show the removed tables at all. This will allow to check
+  if tables were removed, and also will behave nicely with anchor model and
+  VIEWs: stuff that user doesn't care about just won't be there.
+
+5. Tests and benchmarks
+-----------------------
+Should create a benchmark in sql-bench which checks if the dbms has table
+elimination.
+TODO elaborate
 
-5. Todo, issues to resolve
+6. Todo, issues to resolve
 --------------------------
 
-5.1 To resolve
+6.1 To resolve
 ~~~~~~~~~~~~~~
-- See EXPLAIN question in section #4.
-
 - Re-check how this works with equality propagation.
 
 - Relationship with prepared statements. 
@@ -87,7 +104,7 @@
   that we'll meet outer joins which have N inner tables of which some are 1-row
   MyISAM tables that do not have primary key.
 
-5.2 Resolved
+6.2 Resolved
 ~~~~~~~~~~~~
 - outer->inner join conversion is not a problem for table elimination. 
   We make outer->inner conversions based on predicates in WHERE. If the WHERE

-=-=(Guest - Fri, 22 May 2009, 17:23)=-=-
High-Level Specification modified.
--- /tmp/wklog.17.old.30851     2009-05-22 17:23:38.000000000 +0300
+++ /tmp/wklog.17.new.30851     2009-05-22 17:23:38.000000000 +0300
@@ -6,7 +6,7 @@
 elimination but not to the same extent.
 
 Basically, what table elimination does, is to remove tables from the
-execution plan when it is unneccessary to include them. This can, of
+execution plan when it is unnecessary to include them. This can, of
 course, only happen if the right circumstances arise. Let us for example
 look at the following query:
 
@@ -22,30 +22,26 @@
 When using A as the left table we ensure that the query will return at
 least as many rows as there are in that table. For rows where the join
 condition (B.id = A.id) is not met the selected column (A.colA) will
-contain a NULL value.
+still contain it's original value. The not seen B.* row would contain all NULL:s.
 
 However, the result set could actually contain more rows than what is
 found in tableA if there are duplicates of the column B.id in tableB. If
-A
-contains a row [1, "val1"] and B the rows [1, "other1a"],[1, "other1b"]
+A contains a row [1, "val1"] and B the rows [1, "other1a"],[1, "other1b"]
 then two rows will match in the join condition. The only way to know
-what
-the result will look like is to actually touch both tables during
+what the result will look like is to actually touch both tables during
 execution.
 
 Instead, let's say that tableB contains rows that make it possible to
 place a unique constraint on the column B.id, for example and often the
 case a primary key. In this situation we know that we will get exactly
-as
-many rows as there are in tableA, since joining with tableB cannot
+as many rows as there are in tableA, since joining with tableB cannot
 introduce any duplicates. If further, as in the example query, we do not
 select any columns from tableB, touching that table during execution is
-unneccessary. We can remove the whole join operation from the execution
+unnecessary. We can remove the whole join operation from the execution
 plan.
 
 Both SQL Server 2005/2008 and Oracle 11g will deploy table elimination
-in
-the case described above. Let us look at a more advanced query, where
+in the case described above. Let us look at a more advanced query, where
 Oracle fails.
 
 select

-=-=(Guest - Fri, 22 May 2009, 17:00)=-=-
Version updated.
--- /tmp/wklog.17.old.30176     2009-05-22 17:00:35.000000000 +0300
+++ /tmp/wklog.17.new.30176     2009-05-22 17:00:35.000000000 +0300
@@ -1 +1 @@
-Maria-2.0
+Server-5.1

-=-=(Guest - Fri, 22 May 2009, 17:00)=-=-
Category updated.
--- /tmp/wklog.17.old.30162     2009-05-22 17:00:28.000000000 +0300
+++ /tmp/wklog.17.new.30162     2009-05-22 17:00:28.000000000 +0300
@@ -1 +1 @@
-Maria-Sprint
+Server-Sprint

	------------------------------------------------------------

		-=-=(View All Progress Notes, 20 total)=-=-
	http://askmonty.org/worklog/index.pl?tid=17&nolimit=1


DESCRIPTION:

Eliminate not needed tables from SELECT queries..
This will speed up some views and automatically generated queries.

Example:

CREATE TABLE B (id int primary key);

select
 A.colA
from
 tableA A
left outer join
 tableB B
on
 B.id = A.id;

In this case we can remove table B and the join from the query.


HIGH-LEVEL SPECIFICATION:



Here is an extended explanation of table elimination.

Table elimination is a feature found in some modern query optimizers, of
which Microsoft SQL Server 2005/2008 seems to have the most advanced
implementation. Oracle 11g has also been confirmed to use table
elimination but not to the same extent.

Basically, what table elimination does, is to remove tables from the
execution plan when it is unnecessary to include them. This can, of
course, only happen if the right circumstances arise. Let us for example
look at the following query:

select
 A.colA
from
 tableA A
left outer join
 tableB B
on
 B.id = A.id;

When using A as the left table we ensure that the query will return at
least as many rows as there are in that table. For rows where the join
condition (B.id = A.id) is not met the selected column (A.colA) will
still contain it's original value. The not seen B.* row would contain all NULL:s.

However, the result set could actually contain more rows than what is
found in tableA if there are duplicates of the column B.id in tableB. If
A contains a row [1, "val1"] and B the rows [1, "other1a"],[1, "other1b"]
then two rows will match in the join condition. The only way to know
what the result will look like is to actually touch both tables during
execution.

Instead, let's say that tableB contains rows that make it possible to
place a unique constraint on the column B.id, for example and often the
case a primary key. In this situation we know that we will get exactly
as many rows as there are in tableA, since joining with tableB cannot
introduce any duplicates. If further, as in the example query, we do not
select any columns from tableB, touching that table during execution is
unnecessary. We can remove the whole join operation from the execution
plan.

Both SQL Server 2005/2008 and Oracle 11g will deploy table elimination
in the case described above. Let us look at a more advanced query, where
Oracle fails.

select
 A.colA
from
 tableA A
left outer join
 tableB B
on
 B.id = A.id
and
 B.fromDate = (
   select
     max(sub.fromDate)
   from
     tableB sub
   where
     sub.id = A.id
 );

In this example we have added another join condition, which ensures
that we only pick the matching row from tableB having the latest
fromDate. In this case tableB will contain duplicates of the column
B.id, so in order to ensure uniqueness the primary key has to contain
the fromDate column as well. In other words the primary key of tableB
is (B.id, B.fromDate).

Furthermore, since the subselect ensures that we only pick the latest
B.fromDate for a given B.id we know that at most one row will match
the join condition. We will again have the situation where joining
with tableB cannot affect the number of rows in the result set. Since
we do not select any columns from tableB, the whole join operation can
be eliminated from the execution plan.

SQL Server 2005/2008 will deploy table elimination in this situation as
well. We have not found a way to make Oracle 11g use it for this type of
query. Queries like these arise in two situations. Either when you have
denormalized model consisting of a fact table with several related
dimension tables, or when you have a highly normalized model where each
attribute is stored in its own table. The example with the subselect is
common whenever you store historized/versioned data.


LOW-LEVEL DESIGN:



<contents>
1. Conditions for removal
1.1 Quick check if there are candidates
2. Removal operation properties
3. Removal operation
4. User interface
5. Tests and benchmarks
6. Todo, issues to resolve
6.1 To resolve
6.2 Resolved
7. Additional issues
</contents>

It's not really about elimination of tables, it's about elimination of inner
sides of outer joins.

1. Conditions for removal
-------------------------
We can eliminate an inner side of outer join if:
1. For each record combination of outer tables, it will always produce
   exactly one record.
2. There are no references to columns of the inner tables anywhere else in
   the query.

#1 means that every table inside the outer join nest is:
 - is a constant table:
    = because it can be accessed via eq_ref(const) access, or
    = it is a zero-rows or one-row MyISAM-like table  [MARK1]
 - has an eq_ref access method candidate.

#2 means that WHERE clause, ON clauses of embedding outer joins, ORDER BY,
  GROUP BY and HAVING do not refer to the inner tables of the outer join
  nest.

1.1 Quick check if there are candidates
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Before we start to enumerate join nests, here is a quick way to check if
there *can be* something to be removed:

  if ((tables used in select_list |  
       tables used in group/order by UNION |
       tables used in where) != bitmap_of_all_tables)
  {
     attempt table elimination;
  }

2. Removal operation properties
-------------------------------
* There is always one way to remove (no choice to remove either this or that)
* It is always better to remove as much tables as possible (at least within 
  our cost model).
Thus, no need for any cost calculations/etc. It's an unconditional rewrite.

3. Removal operation
--------------------
* Remove the outer join nest's nested join structure (i.e. get the
  outer join's TABLE_LIST object $OJ and remove it from $OJ->embedding,
  $OJ->embedding->nested_join. Update table_map's of all ancestor nested
  joins).  [MARK2]

* Move the tables and their JOIN_TABs to front like it is done with const
  tables, with exception that if eliminated outer join nest was within
  another outer join nest, that shouldn't prevent us from moving away the
  eliminated tables. 

* Update join->table_count and all-join-tables bitmap.

* That's it. Nothing else?

4. User interface
-----------------
* We'll add an @@optimizer switch flag for table elimination. Tentative
  name: 'table_elimination'.
  (Note ^^ utility of the above questioned ^, as table elimination can never 
   be worse than no elimination. We're leaning towards not adding the flag)

* EXPLAIN will not show the removed tables at all. This will allow to check
  if tables were removed, and also will behave nicely with anchor model and
  VIEWs: stuff that user doesn't care about just won't be there.

5. Tests and benchmarks
-----------------------
Should create a benchmark in sql-bench which checks if the dbms has table
elimination.
TODO elaborate

6. Todo, issues to resolve
--------------------------

6.1 To resolve
~~~~~~~~~~~~~~
- Re-check how this works with equality propagation.

- Relationship with prepared statements. 
  On one hand, it's natural to desire to make table elimination a
  once-per-statement operation, like outer->inner join conversion. We'll have
  to limit the applicability by removing [MARK1] as that can change during
  lifetime of the statement.

  The other option is to do table elimination every time. This will require to
  rework operation [MARK2] to be undoable.
  
  I'm leaning towards doing the former. With anchor modeling, it is unlikely
  that we'll meet outer joins which have N inner tables of which some are 1-row
  MyISAM tables that do not have primary key.

6.2 Resolved
~~~~~~~~~~~~
- outer->inner join conversion is not a problem for table elimination. 
  We make outer->inner conversions based on predicates in WHERE. If the WHERE
  referred to an inner table (requirement for OJ->IJ conversion) then table
  elimination would not be applicable anyway.

7. Additional issues
--------------------
* We remove ON clauses within semi-join nests. If these clauses contain
  subqueries, they probably should be gone from EXPLAIN output also?

* Aggregate functions report they depend on all tables, that is,
   
     item_agg_func->used_tables() == (1ULL << join->tables) - 1

  always. If we want table elimination to work in presence of grouping, need 
  to devise some other way of analyzing aggregate functions.

* Should eliminated tables be shown in EXPLAIN EXTENDED? 
  - If we just ignore the question, they will be shown
    - this is what happens for constant tables, too.
  - I don't see how showing them could be of any use. They only make it 
    harder to read the rewritten query.

* Table elimination is performed after constant table detection (but before
  the range analysis). Constant tables are technically different from 
  eliminated ones (e.g. the former are shown in EXPLAIN and the latter aren't).
  Considering we've already done the join_read_const_table() call, is there any
  real difference between constant table and eliminated one? If there is, should
  we mark const tables also as eliminated?

* For Multi-table UPDATEs/DELETEs, need to also analyze the SET clause:
  - affected tables must not be eliminated
  - tables that are used on the right side of the SET x=y assignments must 
    not be eliminated either.


ESTIMATED WORK TIME

ESTIMATED COMPLETION DATE
-----------------------------------------------------------------------
WorkLog (v3.5.9)