i stepped back to --mysqld=--binlog-format=mixed and started to use
--suites=
su -c 'cd /usr/share/mysql-test; ./mysql-test-run.pl --parallel=4
--max-test-fail=0 --force
--suites="main-,binlog-,csv-,funcs_1-,funcs_2-,handler-,heap-,maria-,optimizer_unfixed_bugs-,parts-,percona-,roles-,rpl-,sys_vars-,unit-,vcol-"
--mysqld=--binlog-format=mixed' mysql
Completed: Failed 15/1797 tests, 99.17% were successful.
Failing test(s): rpl.rpl_not_null_innodb rpl.rpl_binlog_index
rpl.rpl_semi_sync_event_after_sync rpl.sec_behind_master-5114
rpl.rpl_ip_mix rpl.rpl_ip_mix2 rpl.rpl_ipv6
sys_vars.sysvars_server_notembedded main.ipv4_and_ipv6 main.ipv6
main.mysql_client_test_nonblock main.multi_update
main.set_statement_notembedded_binlog main.view maria.encrypt-wrong-key
with parallel and tmpfs the whole test takes only some minutes (it was
also not that slow with mixed, only one test and on-disk since the
machine has horsepwoer) however
most of the failing tests should not have been started at all because
binlog mode or features just not compiled by intention and i have
included the details below the cmkae flags
_______________________________________
cmake . -DBUILD_CONFIG=mysql_release \
-DFEATURE_SET="large" \
-DCMAKE_INSTALL_PREFIX="%{_prefix}" \
-DINSTALL_INCLUDEDIR=include/mysql \
-DINSTALL_LAYOUT=RPM \
-DINSTALL_LIBDIR="%{_lib}/mysql" \
-DINSTALL_MANDIR=share/man \
-DINSTALL_MYSQLSHAREDIR=share/mysql \
-DINSTALL_MYSQLTESTDIR=share/mysql-test \
-DINSTALL_PLUGINDIR="%{_lib}/mysql/plugin" \
-DINSTALL_SBINDIR=libexec \
-DINSTALL_SCRIPTDIR=bin \
-DINSTALL_SQLBENCHDIR= \
-DINSTALL_SUPPORTFILESDIR=share/mysql \
-DMYSQL_DATADIR="%{_sharedstatedir}/mysql" \
-DMYSQL_UNIX_ADDR="%{_sharedstatedir}/mysql/mysql.sock" \
-DENABLED_PROFILING=OFF \
-DENABLE_DEBUG_SYNC=OFF \
-DENABLE_DTRACE=OFF \
-DPLUGIN_ARCHIVE=NO \
-DPLUGIN_BLACKHOLE=NO \
-DPLUGIN_CASSANDRA=NO \
-DPLUGIN_FEDERATED=NO \
-DPLUGIN_FEEDBACK=NO \
-DPLUGIN_MROONGA=NO \
-DPLUGIN_OQGRAPH=NO \
-DPLUGIN_PARTITION=NO \
-DPLUGIN_PERFSCHEMA=NO \
-DPLUGIN_SEQUENCE=NO \
-DPLUGIN_SPHINX=NO \
-DPLUGIN_SPIDER=NO \
-DPLUGIN_XTRADB=YES \
-DWITHOUT_DYNAMIC_PLUGINS=ON \
-DWITHOUT_TOKUDB=ON \
-DWITH_ATOMIC_OPS=smp \
-DWITH_EMBEDDED_SERVER=OFF \
-DWITH_INNODB_DISALLOW_WRITES=OFF \
-DWITH_JEMALLOC=system \
-DWITH_LIBWRAP=OFF \
-DWITH_PIC=ON \
-DWITH_READLINE=OFF \
-DWITH_SAFEMALLOC=OFF \
-DWITH_SSL=system \
-DWITH_VALGRIND=OFF \
-DWITH_WSREP=OFF \
-DWITH_ZLIB=system
_______________________________________
rpl.rpl_not_null_innodb 'row,xtradb' w2 [ fail ]
Test ended at 2017-01-21 15:09:28
CURRENT_TEST: rpl.rpl_not_null_innodb
mysqltest: In included file "./include/rpl_init.inc":
included from ./include/master-slave.inc at line 38:
included from /usr/share/mysql-test/suite/rpl/t/rpl_not_null_innodb.test
at line 15:
At line 165: query 'SET GLOBAL gtid_slave_pos= ""' failed: 1198: This
operation cannot be performed as you have a running slave ''; run STOP
SLAVE '' first
The result from queries just before the failure was:
include/master-slave.inc
- saving
'/usr/share/mysql-test/var/2/log/rpl.rpl_not_null_innodb-row,xtradb/' to
'/usr/share/mysql-test/var/log/rpl.rpl_not_null_innodb-row,xtradb/'
_______________________________________
rpl.rpl_binlog_index 'row' w1 [ fail ]
Test ended at 2017-01-21 15:09:40
CURRENT_TEST: rpl.rpl_binlog_index
mysqltest: In included file "./include/rpl_init.inc":
included from ./include/master-slave.inc at line 38:
included from /usr/share/mysql-test/suite/rpl/t/rpl_binlog_index.test at
line 20:
At line 165: query 'SET GLOBAL gtid_slave_pos= ""' failed: 1198: This
operation cannot be performed as you have a running slave ''; run STOP
SLAVE '' first
The result from queries just before the failure was:
include/master-slave.inc
- saving '/usr/share/mysql-test/var/1/log/rpl.rpl_binlog_index-row/' to
'/usr/share/mysql-test/var/log/rpl.rpl_binlog_index-row/'
_______________________________________
rpl.rpl_semi_sync_event_after_sync 'mix,xtradb' w2 [ fail ]
Test ended at 2017-01-21 15:10:14
CURRENT_TEST: rpl.rpl_semi_sync_event_after_sync
mysqltest: At line 1: query 'set global
rpl_semi_sync_master_wait_point=AFTER_SYNC' failed: 1193: Unknown system
variable 'rpl_semi_sync_master_wait_point'
The result from queries just before the failure was:
set global rpl_semi_sync_master_wait_point=AFTER_SYNC;
- saving
'/usr/share/mysql-test/var/2/log/rpl.rpl_semi_sync_event_after_sync-mix,xtradb/'
to
'/usr/share/mysql-test/var/log/rpl.rpl_semi_sync_event_after_sync-mix,xtradb/'
_______________________________________
rpl.sec_behind_master-5114 'stmt' w4 [ fail ]
Test ended at 2017-01-21 15:10:24
CURRENT_TEST: rpl.sec_behind_master-5114
mysqltest: In included file "./include/rpl_init.inc":
included from ./include/master-slave.inc at line 38:
included from
/usr/share/mysql-test/suite/rpl/t/sec_behind_master-5114.test at line 1:
At line 165: query 'SET GLOBAL gtid_slave_pos= ""' failed: 1198: This
operation cannot be performed as you have a running slave ''; run STOP
SLAVE '' first
The result from queries just before the failure was:
include/master-slave.inc
- saving
'/usr/share/mysql-test/var/4/log/rpl.sec_behind_master-5114-stmt/' to
'/usr/share/mysql-test/var/log/rpl.sec_behind_master-5114-stmt/'
_______________________________________
rpl.rpl_ip_mix w2 [ fail ]
Test ended at 2017-01-21 15:11:52
CURRENT_TEST: rpl.rpl_ip_mix
mysqltest: In included file "./include/rpl_ip_mix.inc":
included from /usr/share/mysql-test/suite/rpl/t/rpl_ip_mix.test at
line 11:
At line 2: query 'connect master,$IPv6,root,,test,$MASTER_MYPORT'
failed: 2003: Can't connect to MySQL server on '::1' (99 "Cannot assign
requested address")
The result from queries just before the failure was:
#################### IP: ::1 ###########################
connect (master,::1,root,,test,MASTER_MYPORT);
- saving '/usr/share/mysql-test/var/2/log/rpl.rpl_ip_mix/' to
'/usr/share/mysql-test/var/log/rpl.rpl_ip_mix/'
rpl.rpl_ip_mix2 w2 [ fail ]
Test ended at 2017-01-21 15:11:52
CURRENT_TEST: rpl.rpl_ip_mix2
mysqltest: In included file "./include/rpl_ip_mix2.inc":
included from /usr/share/mysql-test/suite/rpl/t/rpl_ip_mix2.test at line
11:
At line 4: query 'connect slave,$IPv6,root,,test,$SLAVE_MYPORT' failed:
2003: Can't connect to MySQL server on '::1' (99 "Cannot assign
requested address")
The result from queries just before the failure was:
#################### IP: ::1 ###########################
connect (master,127.0.0.1,root,,test,MASTER_MYPORT);
connect (slave,::1,root,,test,SLAVE_MYPORT);
- saving '/usr/share/mysql-test/var/2/log/rpl.rpl_ip_mix2/' to
'/usr/share/mysql-test/var/log/rpl.rpl_ip_mix2/'
rpl.rpl_ipv4_as_ipv6 w2 [ pass ] 55
rpl.rpl_ipv6 w2 [ fail ]
Test ended at 2017-01-21 15:11:56
CURRENT_TEST: rpl.rpl_ipv6
mysqltest: In included file "./include/rpl_ipv6.inc":
included from /usr/share/mysql-test/suite/rpl/t/rpl_ipv6.test at line 13:
At line 2: query 'connect master,$IPv6,root,,test,$MASTER_MYPORT'
failed: 2003: Can't connect to MySQL server on '::1' (99 "Cannot assign
requested address")
The result from queries just before the failure was:
#################### IP: ::1 ###########################
connect (master,::1,root,,test,MASTER_MYPORT);
- saving '/usr/share/mysql-test/var/2/log/rpl.rpl_ipv6/' to
'/usr/share/mysql-test/var/log/rpl.rpl_ipv6/'
_______________________________________
sys_vars.sysvars_server_notembedded '64bit' w2 [ fail ]
Test ended at 2017-01-21 15:12:32
CURRENT_TEST: sys_vars.sysvars_server_notembedded
---
/usr/share/mysql-test/suite/sys_vars/r/sysvars_server_notembedded.result
2017-01-17 20:38:24.000000000 +0100
+++
/usr/share/mysql-test/suite/sys_vars/r/sysvars_server_notembedded.reject
2017-01-21 15:12:32.120425458 +0100
mysqltest: Result length mismatch
- saving
'/usr/share/mysql-test/var/2/log/sys_vars.sysvars_server_notembedded-64bit/'
to
'/usr/share/mysql-test/var/log/sys_vars.sysvars_server_notembedded-64bit/'
_______________________________________
main.ipv4_and_ipv6 w2 [ fail ]
Test ended at 2017-01-21 15:12:38
CURRENT_TEST: main.ipv4_and_ipv6
/usr/bin/mysqladmin: connect to server at '::1' failed
error: 'Can't connect to MySQL server on '::1' (99 "Cannot assign
requested address")'
Check that mysqld is running on ::1 and that the port is 16060.
You can check this by doing 'telnet ::1 16060'
mysqltest: In included file
"/usr/share/mysql-test/include/ipv6_clients.inc":
included from /usr/share/mysql-test/t/ipv4_and_ipv6.test at line 7:
At line 1: exec of '/usr/bin/mysqladmin
--defaults-file=/usr/share/mysql-test/var/2/my.cnf
--default-character-set=latin1 -h ::1 -P 16060 -u root ping ' failed,
error: 256, status: 1, errno: 2
Output from before failure:
_______________________________________
main.ipv6 w2 [ fail ]
Test ended at 2017-01-21 15:12:39
CURRENT_TEST: main.ipv6
/usr/bin/mysqladmin: connect to server at '::1' failed
error: 'Can't connect to MySQL server on '::1' (99 "Cannot assign
requested address")'
Check that mysqld is running on ::1 and that the port is 16060.
You can check this by doing 'telnet ::1 16060'
mysqltest: In included file
"/usr/share/mysql-test/include/ipv6_clients.inc":
included from /usr/share/mysql-test/t/ipv6.test at line 14:
At line 1: exec of '/usr/bin/mysqladmin
--defaults-file=/usr/share/mysql-test/var/2/my.cnf
--default-character-set=latin1 -h ::1 -P 16060 -u root ping ' failed,
error: 256, status: 1, errno: 2
_______________________________________
main.mysql_client_test_nonblock w3 [ fail ]
Test ended at 2017-01-21 15:13:46
CURRENT_TEST: main.mysql_client_test_nonblock
mysqltest: At line 18: exec of '/usr/bin/mysql_client_test
--defaults-file=/usr/share/mysql-test/var/3/my.cnf --testcase
--vardir=/usr/share/mysql-test/var/3 --non-blocking-api
--getopt-ll-test=25600M >>
/usr/share/mysql-test/var/3/log/mysql_client_test.out.log 2>&1' failed,
error: 256, status: 1, errno: 2
Output from before failure:
call mtr.add_suppression(" Error reading file
'./client_test_db/test_frm_bug.frm'");
_______________________________________
main.multi_update 'xtradb' w2 [ fail ]
Test ended at 2017-01-21 15:14:10
CURRENT_TEST: main.multi_update
--- /usr/share/mysql-test/r/multi_update.result 2017-01-17
20:38:20.000000000 +0100
+++ /usr/share/mysql-test/r/multi_update.reject 2017-01-21
15:14:09.912153479 +0100
@@ -1055,7 +1055,6 @@
Warnings:
Warning 1264 Out of range value for column 'field1' at row 1
Warning 1264 Out of range value for column 'field1' at row 2
-Note 1592 Unsafe statement written to the binary log using
statement format since BINLOG_FORMAT = STATEMENT. UPDATE IGNORE is
unsafe because the order in which rows are updated determines which (if
any) rows are ignored. This order cannot be predicted and may differ on
master and the slave.
UPDATE (SELECT 128 as col1) x, table_11757486 SET field1=x.col1;
ERROR 22003: Out of range value for column 'field1' at row 1
UPDATE table_11757486 SET field1=128;
@@ -1069,7 +1068,6 @@
Warnings:
Warning 1264 Out of range value for column 'field1' at row 1
Warning 1264 Out of range value for column 'field1' at row 2
-Note 1592 Unsafe statement written to the binary log using
statement format since BINLOG_FORMAT = STATEMENT. UPDATE IGNORE is
unsafe because the order in which rows are updated determines which (if
any) rows are ignored. This order cannot be predicted and may differ on
master and the slave.
DROP TABLE table_11757486;
SET SESSION SQL_MODE=default;
end of 10.0 tests
mysqltest: Result length mismatch
_______________________________________
main.set_statement_notembedded_binlog w2 [ fail ]
Test ended at 2017-01-21 15:14:33
CURRENT_TEST: main.set_statement_notembedded_binlog
--- /usr/share/mysql-test/r/set_statement_notembedded_binlog.result
2017-01-17 20:38:21.000000000 +0100
+++ /usr/share/mysql-test/r/set_statement_notembedded_binlog.reject
2017-01-21 15:14:33.553868145 +0100
@@ -34,23 +34,10 @@
f1()
1113
111313
-Warnings:
-Note 1592 Unsafe statement written to the binary log using
statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe
because it invokes a trigger or a stored function that inserts into an
AUTO_INCREMENT column. Inserted values cannot be logged correctly.
-Note 1592 Unsafe statement written to the binary log using
statement format since BINLOG_FORMAT = STATEMENT. Statements writing to
a table with an auto-increment column after selecting from another table
are unsafe because the order in which rows are retrieved determines what
(if any) rows will be written. This order cannot be predicted and may
differ on master and the slave.
-Note 1592 Unsafe statement written to the binary log using
statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe
because it invokes a trigger or a stored function that inserts into an
AUTO_INCREMENT column. Inserted values cannot be logged correctly.
-Note 1592 Unsafe statement written to the binary log using
statement format since BINLOG_FORMAT = STATEMENT. Statements writing to
a table with an auto-increment column after selecting from another table
are unsafe because the order in which rows are retrieved determines what
(if any) rows will be written. This order cannot be predicted and may
differ on master and the slave.
show binlog events limit 16, 100;
_______________________________________
main.view w3 [ fail ]
Test ended at 2017-01-21 15:15:15
CURRENT_TEST: main.view
mysqltest: At line 5501: query 'alter table v1 check partition p1'
failed: 1289: The 'partitioning' feature is disabled; you need MariaDB
built with '--with-plugin-partition' to have it working
_______________________________________
maria.encrypt-wrong-key w3 [ fail ]
Test ended at 2017-01-21 15:15:24
CURRENT_TEST: maria.encrypt-wrong-key
Server [mysqld.1 - pid: 30821, winpid: 30821, exit: 512] failed during
test run
Server log from this test:
----------SERVER LOG START-----------
2017-01-21 15:15:23 139933618535168 [Note] /usr/libexec/mysqld: Normal
shutdown
2017-01-21 15:15:23 139933618535168 [Note] Event Scheduler: Purging the
queue. 0 events
2017-01-21 15:15:23 139933618535168 [Note] /usr/libexec/mysqld: Shutdown
complete
2017-01-21 15:15:24 139668697172288 [Note] /usr/libexec/mysqld (mysqld
10.1.21-MariaDB) starting as process 30823 ...
2017-01-21 15:15:24 139668697172288 [Warning] Could not increase number
of max_open_files to more than 1024 (request: 4162)
2017-01-21 15:15:24 139668697172288 [ERROR] Can't open shared library
'/usr/lib64/mysql/plugin/file_key_management.so' (errno: 2, cannot open
shared object file: No such file or directory)
_______________________________________
Am 21.01.2017 um 14:28 schrieb Elena Stepanova:
Hi Reindl,
On 01/21/2017 05:11 AM, Reindl Harald wrote:
Am 20.01.2017 um 22:58 schrieb Elena Stepanova:
Hi Reindl,
On 01/20/2017 06:03 PM, Reindl Harald wrote:
shouldn't the testsuite at some point in time run without errors?
The testsuite should run without errors with some combinations of
build/run server options which it's tuned for and which we normally
run
it with.
Unfortunately, with arbitrary non-default options in general MTR
cannot
be guaranteed to run successfully, it's just not that kind of tool.
Some
problems are easy to fix though, and we'll do it whenever we can.
Please
in future just file bug reports right away, no need to suffer for
years.
We can only fix something that we are aware of.
"run STOP SLAVE '' first" - uhm did i start it? it's scripted by
shipped
scripts
It happens because of --mysqld=--binlog-format=mixed on the command
line, more specifically due to a non-clean exit of a previous test
which
realizes too late that binlog format has been overridden from a
command
line, and skips the rest of execution, including the clean-up
well, with --mysqld=--binlog-format=mixed at least it did somehow
finish
at all, i started it without at 7:00 PM as i left home, i came back
home
10 minutes ago (4:00 AM) and it still did not finish
but maybe that's just because the new encryption features where the
test-suite just don't realize that they are not built and insetad sakip
them all togehter it waits for every peice 3 seconds
Well, some failures can prolong the torture, but really it's probably a
combination of factors. Still, 9 hours is very long even for a
worst-case scenario, so it would be interesting to look at the full MTR
output to understand what's happening.
Without seeing it, importantly execution times of successful tests, I
can only guess, but if binlog_format setting was the only thing that
changed between the runs, and if you always run with '--max-test-fail=0
--force', most likely the culprit is the execution time of rpl suite,
worsened by general low performance.
rpl is the longest suite of all, and since it's running in full now, it
can take a lot of time (which is why I agree that running tests with
only one binlog_format is a reasonable demand). Before, when you ran
tests with '--mysqld=--binlog-format=mixed', a big part of this suite
and parts of some other suites either were skipped or failed.
You are running tests on disk, rather than in memory. Latency for
on-disk runs can be quite bad, depending on the machine. Replication
tests in particular are quite sensitive to this. Here is an example from
my laptop:
on disk:
rpl.rpl_partition_innodb 'mix,xtradb' [ pass ] 41647
in memory:
rpl.rpl_partition_innodb 'mix,xtradb' [ pass ] 251
The fact that tests run without parallel also doesn't help. If you have
enough memory, it's worth considering parallel execution -- every test
will take longer, but the overall duration might decrease significantly.
Regards,
Elena
Failed to start mysqld.1
- skipping
'/usr/share/mysql-test/var/log/encryption.innodb-page_encryption-cbc,xtradb/'
***Warnings generated in error logs during shutdown after running
tests:
encryption.innodb-page_encryption
2017-01-20 19:01:51 140487478450496 [ERROR] /usr/libexec/mysqld:
unknown
variable 'file-key-management-encryption-algorithm=aes_cbc'
2017-01-20 19:01:51 140487478450496 [ERROR] Aborting
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7618,
winpid: 7618, exit: 1792] died after mysql-test-run waited 3.1 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7641,
winpid: 7641, exit: 1792] died after mysql-test-run waited 0.3 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7646,
winpid: 7646, exit: 1792] died after mysql-test-run waited 0.3 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7651,
winpid: 7651, exit: 1792] died after mysql-test-run waited 0.3 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7656,
winpid: 7656, exit: 1792] died after mysql-test-run waited 0.3 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7661,
winpid: 7661, exit: 1792] died after mysql-test-run waited 0.3 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7666,
winpid: 7666, exit: 1792] died after mysql-test-run waited 3.1 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7701,
winpid: 7701, exit: 1792] died after mysql-test-run waited 2.9 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
encryption.innodb_page_encryption_key_change 'cbc,xtradb' [ fail ]
Test ended at 2017-01-20 19:02:05
CURRENT_TEST: encryption.innodb_first_page
CURRENT_TEST: encryption.innodb-log-encrypt
CURRENT_TEST: encryption.innodb-page_encryption_log_encryption
CURRENT_TEST: encryption.innodb-missing-key
CURRENT_TEST: encryption.innodb_encryption_row_compressed
CURRENT_TEST: encryption.innodb_encryption_filekeys
CURRENT_TEST: encryption.innodb_encryption_is
CURRENT_TEST: encryption.innochecksum
CURRENT_TEST: encryption.innodb-bad-key-change
CURRENT_TEST: encryption.innodb-discard-import
CURRENT_TEST: encryption.innodb-discard-import-change
CURRENT_TEST: encryption.innodb-encr-threads
CURRENT_TEST: encryption.innodb-encryption-alter
CURRENT_TEST: encryption.innodb-page_encryption
CURRENT_TEST: encryption.innodb_page_encryption_key_change
Failed to start mysqld.1
- skipping
'/usr/share/mysql-test/var/log/encryption.innodb_page_encryption_key_change-cbc,xtradb/'
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7724,
winpid: 7724, exit: 1792] died after mysql-test-run waited 3.2 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
***Warnings generated in error logs during shutdown after running
tests:
encryption.innodb_page_encryption_key_change
2017-01-20 19:01:55 140380436027712 [ERROR] /usr/libexec/mysqld:
unknown
variable 'file-key-management-encryption-algorithm=aes_cbc'
2017-01-20 19:01:55 140380436027712 [ERROR] Aborting
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7747,
winpid: 7747, exit: 1792] died after mysql-test-run waited 3.1 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7770,
winpid: 7770, exit: 1792] died after mysql-test-run waited 3.1 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7793,
winpid: 7793, exit: 1792] died after mysql-test-run waited 3.1 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7817,
winpid: 7817, exit: 1792] died after mysql-test-run waited 3.1 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7840,
winpid: 7840, exit: 1792] died after mysql-test-run waited 3.1 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7863,
winpid: 7863, exit: 1792] died after mysql-test-run waited 3.2 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7886,
winpid: 7886, exit: 1792] died after mysql-test-run waited 3.1 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
worker[1] mysql-test-run: WARNING: Process [mysqld.1 - pid: 7909,
winpid: 7909, exit: 1792] died after mysql-test-run waited 0.3 seconds
for /usr/share/mysql-test/var/run/mysqld.1.pid to be created.
^C
Sitzung beendet, Shell wird abgewürgt ?wrong class (hack attempt?):
$VAR1 = \undef;
$VAR2 = '
1234My::Test
main.mysql_client_testname
in_overlay
mysql_client_test shortname
&--plugin-load-add=$AUTH_TEST_PLUGIN_SO slave_opt
./usr/share/mysql-test/t/mysql_client_test.testpath
&--plugin-load-add=$AUTH_TEST_PLUGIN_SO
--general-log
3--general-log-file=$MYSQLTEST_VARDIR/log/master.log
--log-output=FILE,TABLE
--max-allowed-packet=32000000
master_opt
template_pathMy::Suite::Main
/usr/share/mysql-test/rrdiropts
mainnameX
derived_view
show_explain_non_select
events_stress
func_hybrid_type
myisam_mrr
cast
signal_code
change_user
innodb_mysql_lock
sp-prelocking
order_by_sortkey
mdl_sync
mysqld--defaults-file
events_bugs
tmp_table_count-7586
udf_debug_sync
multi_statement
parser_stack
func_if
unsafe_binlog_innodb
bool
ctype_cp1250_ch
mysqltest
ctype_ldml
lock
mysqld_option_err
sp-code
?myisam_enable_keys-10506
information_schema_db
ctype_gbk_binlog
odbc
variables
tablelock
join_outer_innodb
dyncol
debug_sync
join_nested
sighup-6580
func_test
truncate_coverage
group_min_max
bug58669
mysql_locale_posix
ipv4_as_ipv6
gis-rt-precise
varbinary
key
fulltext3
kill_processlist-6619
myisam_crash_before_flush_keys
trigger_null-8605
ps_4heap
mysqlbinlog
get_diagnostics
select_safe
\\0';
^C ? abgewürgt.
