me-tv-development team mailing list archive
-
me-tv-development team
-
Mailing list archive
-
Message #00435
[Bug 267034] Re: me-tv segmentation fault
** Changed in: me-tv
Status: Incomplete => Won't Fix
--
me-tv segmentation fault
https://bugs.launchpad.net/bugs/267034
You received this bug notification because you are a member of Me TV
Development, which is subscribed to Me TV.
Status in Me TV, it's TV for me computer: Won't Fix
Bug description:
Me-tv does not give me option to scan again for channels. There is nothing in the config. file. Have hardy x64. 'xine-dvb//' says there is no dvb plugin for xine - not sure how important this is. My totem works with xine OK. Have PCI card: DVICO Fusion HDTV RT 5 Gold, which works OK under WIndows XP, but I still cannot make it work (find channels to play) under Hardy x64. Please help. Here is as much as I can copy of dmesg. What follows after that is re me-tv segmentation fault.
[ 34.019390] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 34.019463] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 34.019534] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 34.019604] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[ 34.019675] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 34.019745] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 34.019814] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 34.019884] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 34.019985] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 34.020011] pnp: PnP ACPI init
[ 34.020017] ACPI: bus type pnp registered
[ 34.022134] pnp: PnP ACPI: found 12 devices
[ 34.022136] ACPI: ACPI bus type pnp unregistered
[ 34.022371] PCI: Using ACPI for IRQ routing
[ 34.022373] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 34.087719] NET: Registered protocol family 8
[ 34.087722] NET: Registered protocol family 20
[ 34.087757] NetLabel: Initializing
[ 34.087758] NetLabel: domain hash size = 128
[ 34.087760] NetLabel: protocols = UNLABELED CIPSOv4
[ 34.087773] NetLabel: unlabeled traffic allowed by default
[ 34.087783] PCI-GART: No AMD northbridge found.
[ 34.087819] AppArmor: AppArmor Filesystem Enabled
[ 34.097250] Time: tsc clocksource has been installed.
[ 34.117289] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 34.117292] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 34.117295] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 34.117298] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 34.117301] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 34.117303] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 34.117306] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 34.117311] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
[ 34.117313] system 00:01: iomem range 0xc0000-0xdffff has been reserved
[ 34.117316] system 00:01: iomem range 0xe0000-0xfffff could not be reserved
[ 34.117324] system 00:06: ioport range 0x500-0x53f has been reserved
[ 34.117326] system 00:06: ioport range 0x400-0x47f has been reserved
[ 34.117329] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 34.117740] PCI: Bridge: 0000:00:01.0
[ 34.117742] IO window: 3000-3fff
[ 34.117744] MEM window: e3400000-e34fffff
[ 34.117747] PREFETCH window: d0000000-dfffffff
[ 34.117749] PCI: Bridge: 0000:00:1c.0
[ 34.117750] IO window: disabled.
[ 34.117754] MEM window: disabled.
[ 34.117756] PREFETCH window: disabled.
[ 34.117760] PCI: Bridge: 0000:00:1c.4
[ 34.117762] IO window: 2000-2fff
[ 34.117765] MEM window: e3300000-e33fffff
[ 34.117768] PREFETCH window: e3600000-e36fffff
[ 34.117772] PCI: Bridge: 0000:00:1c.5
[ 34.117774] IO window: 1000-1fff
[ 34.117777] MEM window: e3200000-e32fffff
[ 34.117780] PREFETCH window: disabled.
[ 34.117784] PCI: Bridge: 0000:05:00.0
[ 34.117785] IO window: disabled.
[ 34.117790] MEM window: e3000000-e30fffff
[ 34.117793] PREFETCH window: disabled.
[ 34.117797] PCI: Bridge: 0000:00:1e.0
[ 34.117798] IO window: disabled.
[ 34.117801] MEM window: e0000000-e31fffff
[ 34.117804] PREFETCH window: disabled.
[ 34.117815] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.117819] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 34.117834] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 34.117838] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 34.117851] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 34.117855] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 34.117869] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 34.117873] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 34.117881] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 34.117898] NET: Registered protocol family 2
[ 34.227476] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 34.228573] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 34.234137] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 34.234843] TCP: Hash tables configured (established 524288 bind 65536)
[ 34.234845] TCP reno registered
[ 34.257432] checking if image is initramfs... it is
[ 34.616918] Switched to high resolution mode on CPU 1
[ 34.626498] Switched to high resolution mode on CPU 0
[ 34.925479] Freeing initrd memory: 7588k freed
[ 34.929205] audit: initializing netlink socket (disabled)
[ 34.929218] audit(1220686340.790:1): initialized
[ 34.929629] Total HugeTLB memory allocated, 0
[ 34.931274] VFS: Disk quotas dquot_6.5.1
[ 34.931333] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 34.931484] io scheduler noop registered
[ 34.931486] io scheduler anticipatory registered
[ 34.931488] io scheduler deadline registered (default)
[ 34.931581] io scheduler cfq registered
[ 34.932658] Boot video device is 0000:01:00.0
[ 34.935151] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 34.935178] assign_interrupt_mode Found MSI capability
[ 34.935201] Allocate Port Service[0000:00:01.0:pcie00]
[ 34.935263] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 34.935295] assign_interrupt_mode Found MSI capability
[ 34.935322] Allocate Port Service[0000:00:1c.0:pcie00]
[ 34.935350] Allocate Port Service[0000:00:1c.0:pcie02]
[ 34.935417] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 34.935450] assign_interrupt_mode Found MSI capability
[ 34.935477] Allocate Port Service[0000:00:1c.4:pcie00]
[ 34.935511] Allocate Port Service[0000:00:1c.4:pcie02]
[ 34.935585] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 34.935618] assign_interrupt_mode Found MSI capability
[ 34.935645] Allocate Port Service[0000:00:1c.5:pcie00]
[ 34.935671] Allocate Port Service[0000:00:1c.5:pcie02]
[ 34.956028] Real Time Clock Driver v1.12ac
[ 34.956116] Linux agpgart interface v0.102
[ 34.956118] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 34.956242] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.956806] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.957548] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 34.957602] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 34.957677] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 34.957678] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 34.960575] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 34.960579] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 35.026717] mice: PS/2 mouse device common for all mice
[ 35.026760] cpuidle: using governor ladder
[ 35.026762] cpuidle: using governor menu
[ 35.026905] NET: Registered protocol family 1
[ 35.026987] registered taskstats version 1
[ 35.027111] Magic number: 8:685:520
[ 35.027203] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 35.027206] BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
[ 35.027376] Freeing unused kernel memory: 328k freed
[ 36.178252] fuse init (API version 7.9)
[ 36.190946] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 36.190956] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 36.476621] usbcore: registered new interface driver usbfs
[ 36.476641] usbcore: registered new interface driver hub
[ 36.478582] SCSI subsystem initialized
[ 36.482539] usbcore: registered new device driver usb
[ 36.483892] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 36.483894] Copyright (c) 1999-2006 Intel Corporation.
[ 36.483943] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 36.483955] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 36.486155] libata version 3.00 loaded.
[ 36.490575] USB Universal Host Controller Interface driver v3.0
[ 36.494630] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 36.544913] Floppy drive(s): fd0 is 1.44M
[ 36.565881] FDC 0 is a post-1991 82077
[ 36.566039] e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:26:67:7b
[ 36.647561] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 36.647719] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 36.647747] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 36.648532] scsi0 : pata_marvell
[ 36.649262] scsi1 : pata_marvell
[ 36.649284] ata1: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 16
[ 36.649286] ata2: PATA max UDMA/133 cmd 0x2010 ctl 0x2020 bmdma 0x2008 irq 16
[ 36.649728] BAR5:00:04 01:7F 02:22 03:C8 04:02 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00
[ 36.813926] BAR5:00:04 01:7F 02:22 03:C8 04:02 05:00 06:00 07:80 08:00 09:00 0A:00 0B:00 0C:1F 0D:00 0E:00 0F:00
[ 36.983821] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 37.033872] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[e3104000-e31047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 37.038340] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 37.038344] ACPI: PCI Interrupt 0000:06:0c.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 37.038370] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 37.038380] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 37.038406] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 37.038422] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 37.038430] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 37.088368] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[e3006000-e30067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 37.088483] ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 37.088900] ohci_hcd 0000:06:08.0: OHCI Host Controller
[ 37.089099] ohci_hcd 0000:06:08.0: new USB bus registered, assigned bus number 1
[ 37.089112] ohci_hcd 0000:06:08.0: irq 21, io mem 0xe3005000
[ 37.089142] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 37.089151] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 37.089153] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 37.089170] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 37.089192] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[ 37.089294] usb usb2: configuration #1 chosen from 1 choice
[ 37.089312] hub 2-0:1.0: USB hub found
[ 37.089317] hub 2-0:1.0: 2 ports detected
[ 37.192207] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 37.192217] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 37.192219] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 37.192239] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 37.192264] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[ 37.192349] usb usb3: configuration #1 chosen from 1 choice
[ 37.192366] hub 3-0:1.0: USB hub found
[ 37.192371] hub 3-0:1.0: 2 ports detected
[ 37.301935] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 37.301941] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 37.301943] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 37.301960] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 37.301982] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[ 37.302060] usb usb4: configuration #1 chosen from 1 choice
[ 37.302077] hub 4-0:1.0: USB hub found
[ 37.302081] hub 4-0:1.0: 2 ports detected
[ 37.411730] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 37.411736] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 37.411738] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 37.411754] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 37.411774] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[ 37.411851] usb usb5: configuration #1 chosen from 1 choice
[ 37.411869] hub 5-0:1.0: USB hub found
[ 37.411874] hub 5-0:1.0: 2 ports detected
[ 37.471530] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 37.521891] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 37.522303] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 37.522308] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 37.522353] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
[ 37.526251] ehci_hcd 0000:00:1d.7: debug port 1
[ 37.526256] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 37.526261] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe3504400
[ 37.611241] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 37.611325] usb usb6: configuration #1 chosen from 1 choice
[ 37.611348] hub 6-0:1.0: USB hub found
[ 37.611353] hub 6-0:1.0: 8 ports detected
[ 37.721209] usb usb1: configuration #1 chosen from 1 choice
[ 37.721232] hub 1-0:1.0: USB hub found
[ 37.721241] hub 1-0:1.0: 3 ports detected
[ 38.009208] usb 2-1: device not accepting address 2, error -71
[ 38.240088] ACPI: PCI Interrupt 0000:06:08.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 38.240587] ohci_hcd 0000:06:08.1: OHCI Host Controller
[ 38.240629] ohci_hcd 0000:06:08.1: new USB bus registered, assigned bus number 7
[ 38.240647] ohci_hcd 0000:06:08.1: irq 22, io mem 0xe3004000
[ 38.348552] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001bc9f84]
[ 38.398490] ieee1394: Host added: ID:BUS[1-00:1023] GUID[005042b5c00df532]
[ 38.808930] usb usb7: configuration #1 chosen from 1 choice
[ 38.808950] hub 7-0:1.0: USB hub found
[ 38.808959] hub 7-0:1.0: 2 ports detected
[ 39.106926] usb 6-3: new high speed USB device using ehci_hcd and address 4
[ 39.259216] usb 6-3: configuration #1 chosen from 1 choice
[ 39.328369] ACPI: PCI Interrupt 0000:06:08.2[C] -> GSI 23 (level, low) -> IRQ 23
[ 39.328798] ehci_hcd 0000:06:08.2: EHCI Host Controller
[ 39.328844] ehci_hcd 0000:06:08.2: new USB bus registered, assigned bus number 8
[ 39.328884] ehci_hcd 0000:06:08.2: irq 23, io mem 0xe3006800
[ 39.347658] ehci_hcd 0000:06:08.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
[ 39.347764] usb usb8: configuration #1 chosen from 1 choice
[ 39.347785] hub 8-0:1.0: USB hub found
[ 39.347791] hub 8-0:1.0: 5 ports detected
[ 39.458811] ata_piix 0000:00:1f.1: version 2.12
[ 39.458828] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 39.458856] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 39.458908] scsi2 : ata_piix
[ 39.458945] scsi3 : ata_piix
[ 39.459344] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[ 39.459347] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[ 39.540407] usb 2-1: new low speed USB device using uhci_hcd and address 4
[ 39.720917] usb 2-1: configuration #1 chosen from 1 choice
[ 39.995107] usb 2-2: new low speed USB device using uhci_hcd and address 5
[ 40.155170] ata3.00: ATAPI: SONY CD-RW CRX220E1, 6YS1, max UDMA/33
[ 40.155184] ata3.01: ATAPI: ATAPI DVD A DH20A4H, QP53, max UDMA/66
[ 40.155192] ata3.01: limited to UDMA/33 due to 40-wire cable
[ 40.189961] usb 2-2: configuration #1 chosen from 1 choice
[ 40.364600] ata3.00: configured for UDMA/33
[ 40.564166] ata3.01: configured for UDMA/33
[ 40.564205] ata4: port disabled. ignoring.
[ 40.568919] scsi 2:0:0:0: CD-ROM SONY CD-RW CRX220E1 6YS1 PQ: 0 ANSI: 5
[ 40.570000] scsi 2:0:1:0: CD-ROM ATAPI DVD A DH20A4H QP53 PQ: 0 ANSI: 5
[ 40.570063] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 40.570085] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 40.570116] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 40.570156] scsi4 : ata_piix
[ 40.570198] scsi5 : ata_piix
[ 40.570302] ata5: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[ 40.570305] ata6: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[ 40.793438] usb 8-2: new high speed USB device using ehci_hcd and address 2
[ 40.954020] ata6.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
[ 40.954023] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 41.045447] ata6.00: configured for UDMA/133
[ 41.045561] scsi 5:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 41.051508] Driver 'sr' needs updating - please use bus_type methods
[ 41.055590] Driver 'sd' needs updating - please use bus_type methods
[ 41.087268] usb 8-2: configuration #1 chosen from 1 choice
[ 41.125465] sr0: scsi3-mmc drive: 6x/52x writer cd/rw xa/form2 cdda tray
[ 41.125470] Uniform CD-ROM driver Revision: 3.20
[ 41.125519] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 41.132953] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 41.132994] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 41.133406] sd 5:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 41.137651] sd 5:0:0:0: [sda] Write Protect is off
[ 41.137654] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 41.137686] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.137728] sd 5:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 41.137736] sd 5:0:0:0: [sda] Write Protect is off
[ 41.137737] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 41.137750] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.137753] sda:<5>sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 41.137925] sr 2:0:1:0: Attached scsi generic sg1 type 5
[ 41.137939] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 41.151518] sda1 sda2 < sda5 >
[ 41.172820] sd 5:0:0:0: [sda] Attached SCSI disk
[ 41.362296] usb 8-4: new high speed USB device using ehci_hcd and address 3
[ 41.514294] usb 8-4: configuration #1 chosen from 1 choice
[ 41.514569] usbcore: registered new interface driver libusual
[ 41.514777] usbcore: registered new interface driver hiddev
[ 41.518306] Initializing USB Mass Storage driver...
[ 41.519156] scsi6 : SCSI emulation for USB Mass Storage devices
[ 41.519588] usb-storage: device found at 4
[ 41.519590] usb-storage: waiting for device to settle before scanning
[ 41.529403] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
[ 41.593080] input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-1
[ 41.632962] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
[ 41.661690] input,hiddev96,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-1
[ 42.022141] hiddev97hidraw2: USB HID v1.10 Device [APC Back-UPS ES 450 FW:844.K1d.D USB FW:K1d] on usb-0000:00:1d.0-2
[ 42.022162] usbcore: registered new interface driver usbhid
[ 42.022166] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 42.022982] scsi7 : SCSI emulation for USB Mass Storage devices
[ 42.023034] usbcore: registered new interface driver usb-storage
[ 42.023036] USB Mass Storage support registered.
[ 42.023112] usb-storage: device found at 3
[ 42.023113] usb-storage: waiting for device to settle before scanning
[ 45.890785] Attempting manual resume
[ 45.890788] swsusp: Resume From Partition 8:5
[ 45.890789] PM: Checking swsusp image.
[ 45.890953] PM: Resume from disk failed.
[ 45.928648] kjournald starting. Commit interval 5 seconds
[ 45.928655] EXT3-fs: mounted filesystem with ordered data mode.
[ 46.503294] usb-storage: device scan complete
[ 46.503784] scsi 6:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2
[ 46.504278] scsi 6:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2
[ 46.505513] sd 6:0:0:0: [sdb] 8009728 512-byte hardware sectors (4101 MB)
[ 46.506137] sd 6:0:0:0: [sdb] Write Protect is off
[ 46.506139] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 46.506141] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 46.508756] sd 6:0:0:0: [sdb] 8009728 512-byte hardware sectors (4101 MB)
[ 46.509380] sd 6:0:0:0: [sdb] Write Protect is off
[ 46.509382] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 46.509384] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 46.509387] sdb: sdb1
[ 46.510304] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 46.510335] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 46.511502] sr2: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 46.511535] sr 6:0:0:1: Attached scsi CD-ROM sr2
[ 46.511564] sr 6:0:0:1: Attached scsi generic sg4 type 5
[ 47.011006] usb-storage: device scan complete
[ 47.011495] scsi 7:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 4.05 PQ: 0 ANSI: 2
[ 47.011991] scsi 7:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 4.05 PQ: 0 ANSI: 2
[ 47.013224] sd 7:0:0:0: [sdc] 8013453 512-byte hardware sectors (4103 MB)
[ 47.013849] sd 7:0:0:0: [sdc] Write Protect is off
[ 47.013851] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 47.013853] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 47.016467] sd 7:0:0:0: [sdc] 8013453 512-byte hardware sectors (4103 MB)
[ 47.017091] sd 7:0:0:0: [sdc] Write Protect is off
[ 47.017093] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 47.017095] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 47.017098] sdc: sdc1
[ 47.018650] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 47.018681] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 47.022704] sr3: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 47.022746] sr 7:0:0:1: Attached scsi CD-ROM sr3
[ 47.022775] sr 7:0:0:1: Attached scsi generic sg6 type 5
[ 52.011576] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 52.111967] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 52.143236] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 52.211815] EDAC MC: Ver: 2.1.0 Aug 20 2008
[ 52.256864] parport_pc 00:08: reported by Plug and Play ACPI
[ 52.256918] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 52.266680] input: Power Button (FF) as /devices/virtual/input/input4
[ 52.310963] ACPI: Power Button (FF) [PWRF]
[ 52.311027] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 52.313512] EDAC i82975x: ECC disabled on both channels.
[ 52.380759] ACPI: Sleep Button (CM) [SLPB]
[ 52.571068] Linux video capture interface: v2.00
[ 52.859829] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 52.859881] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 52.859910] cx88[0]: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold [card=31,autodetected]
[ 52.859912] cx88[0]: TV tuner type 64, Radio tuner type -1
[ 52.869779] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 52.908367] logips2pp: Detected unknown logitech mouse model 74
[ 53.027321] cx88[0]/0: found at 0000:05:02.0, rev: 5, irq: 18, latency: 32, mmio: 0xe2000000
[ 53.265317] tuner 0-0043: chip found @ 0x86 (cx88[0])
[ 53.265337] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
[ 53.265339] tuner 0-0043: type set to tda9887
[ 53.267822] tuner 0-0061: chip found @ 0xc2 (cx88[0])
[ 53.267841] tuner-simple 0-0061: type set to 64 (LG TDVS-H06xF)
[ 53.267843] tuner 0-0061: type set to LG TDVS-H06xF
[ 53.267846] tuner-simple 0-0061: type set to 64 (LG TDVS-H06xF)
[ 53.267847] tuner 0-0061: type set to LG TDVS-H06xF
[ 53.280882] cx2388x alsa driver version 0.0.6 loaded
[ 53.331336] uvcvideo: Found UVC 1.00 device <unnamed> (046d:08ca)
[ 53.374076] usbcore: registered new interface driver uvcvideo
[ 53.374080] USB Video Class driver (v0.1.0)
[ 53.393795] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input6
[ 53.404076] input: i2c IR (FusionHDTV) as /devices/virtual/input/input7
[ 53.486859] usbcore: registered new interface driver snd-usb-audio
[ 54.027373] ir-kbd-i2c: i2c IR (FusionHDTV) detected at i2c-0/0-006b/ir0 [cx88[0]]
[ 54.060786] isl1208 0-006f: chip found, driver version 0.2
[ 54.060822] isl1208 0-006f: rtc core: registered isl1208 as rtc0
[ 54.061662] cx88[0]/0: registered device video1 [v4l2]
[ 54.061680] cx88[0]/0: registered device vbi0
[ 54.064226] cx88[0]/2: cx2388x 8802 Driver Manager
[ 54.064246] ACPI: PCI Interrupt 0000:05:02.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 54.064254] cx88[0]/2: found at 0000:05:02.2, rev: 5, irq: 18, latency: 32, mmio: 0xe0000000
[ 54.064321] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 54.064743] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 54.123688] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[ 54.123692] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 54.123695] cx88[0]/2: subsystem: 18ac:d500, board: DViCO FusionHDTV 5 Gold [card=31]
[ 54.123698] cx88[0]/2: cx2388x based DVB/ATSC card
[ 54.500107] DVB: registering new adapter (cx88[0])
[ 54.500111] DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
[ 54.755997] ACPI: PCI Interrupt 0000:05:02.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 54.756024] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 57.344237] lp0: using parport0 (interrupt-driven).
[ 57.411873] Adding 11871992k swap on /dev/sda5. Priority:-1 extents:1 across:11871992k
[ 57.953675] EXT3 FS on sda1, internal journal
[ 59.028625] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 59.052814] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 59.125517] NET: Registered protocol family 10
[ 59.125725] lo: Disabled Privacy Extensions
[ 59.135475] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 59.755246] No dock devices found.
[ 61.075834] ppdev: user-space parallel port driver
[ 61.283831] audit(1220686368.028:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5550 profile="/usr/sbin/cupsd" namespace="default"
[ 63.138495] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 63.138499] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 64.807226] [drm] Initialized drm 1.1.0 20060810
[ 66.269535] NET: Registered protocol family 17
[ 81.725141] eth0: no IPv6 routers present
[ 385.671373] me-tv[6563]: segfault at 4544a1a3 rip 4147a0 rsp 45443bb0 error 4
[ 401.385169] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 419.617771] compat_ioctl32: v4l2 ioctl VIDIOC_S_PARM, dir=rw (0xc0cc5616)
[ 419.617782] ioctl32(skype:6571): Unknown cmd fd(29) cmd(c0cc5616){t:'V';sz:204} arg(f635fda0) on /dev/video0
[ 827.023694] me-tv[6746]: segfault at 44b8b6db rip 4147a0 rsp 44b84bb0 error 4
[ 1240.415183] me-tv[8013]: segfault at 45117000 rip 4147c2 rsp 45110bb0 error 4
[ 1746.604854] me-tv[8099]: segfault at 449e8839 rip 4147a0 rsp 449e1bb0 error 4
mikeys@mikeys-desktop:~$ sudo me-tv
Me TV-Message: 09/06/2008 01:00:20 - Me TV Version: 0.5.30
Me TV-Message: 09/06/2008 01:00:20 - Loading glade file '/usr/share/me-tv/glade/me-tv.glade'
Me TV-Message: 09/06/2008 01:00:21 - Creating EPG file at '/root/.me-tv/epg.xml'
Me TV-Message: 09/06/2008 01:00:21 - EPG file loaded
Me TV-Message: 09/06/2008 01:00:21 - Channel file loaded
Me TV-Message: 09/06/2008 01:00:21 - Using 'xine' engine
Me TV-Message: 09/06/2008 01:00:22 - Request to change channel to '[00d9] #1'
Me TV-Message: 09/06/2008 01:00:22 - Changing channel to '[00d9] #1'
Me TV-Message: 09/06/2008 01:00:22 - Purging remaining EPG events
Me TV-Message: 09/06/2008 01:00:22 - EPG events purged
Me TV-Message: 09/06/2008 01:00:22 - Tuning to transponder at 99000000 ...
Me TV-Message: 09/06/2008 01:00:22 - Waiting for signal lock ...
Me TV-Message: 09/06/2008 01:00:22 - Got signal lock
Me TV-Message: 09/06/2008 01:00:22 - Tuned to transponder at 99000000
Me TV-Message: 09/06/2008 01:00:22 - Streamer starting
Me TV-Message: 09/06/2008 01:00:22 - Video thread created
Me TV-Message: 09/06/2008 01:00:22 - About to open FIFO 'fifo://root/.me-tv/video.fifo' ...
Me TV-Message: 09/06/2008 01:00:22 - Stream thread created
Me TV-Message: 09/06/2008 01:00:22 - Trying to auto detect PIDs
Me TV-Message: 09/06/2008 01:00:22 - EPG thread created
Me TV-Message: 09/06/2008 01:00:22 - Channel changed to '[00d9] #1'
Me TV-Message: 09/06/2008 01:00:22 - Found 12 associations
Me TV-Message: 09/06/2008 01:00:22 - AC3 PID: 2688
Me TV-Message: 09/06/2008 01:00:22 - AC3 PID: 2689
Me TV-Message: 09/06/2008 01:00:22 - Setting AC3 PID filter to 2688 (0xA80)
Me TV-Message: 09/06/2008 01:00:22 - Setting AC3 PID filter to 2689 (0xA81)
Me TV-Message: 09/06/2008 01:00:22 - PIDs read successfully
Me TV-Message: 09/06/2008 01:00:23 - About to play from FIFO ...
Me TV-Message: 09/06/2008 01:00:23 - Playing from FIFO
Me TV-Message: Exception message: 'Timeout while polling for demuxer'
Me TV-Message: 09/06/2008 01:00:27 - Timeout in EPG thread: Timeout while polling for demuxer
Me TV-Message: 09/06/2008 01:00:27 - Exiting EPG thread
Me TV-Message: 09/06/2008 01:00:44 - Starting auto surf
Me TV-Message: 09/06/2008 01:00:45 - Request to change channel to '[00d9] #1'
Me TV-Message: 09/06/2008 01:00:45 - Already tuned to '[00d9] #1'
Me TV-Message: 09/06/2008 01:00:56 - Request to change channel to '[00da]'
Me TV-Message: 09/06/2008 01:00:56 - Changing channel to '[00da]'
Me TV-Message: 09/06/2008 01:00:56 - Stream thread stopped
Me TV-Message: 09/06/2008 01:00:56 - Purging remaining EPG events
Me TV-Message: 09/06/2008 01:00:56 - EPG events purged
Me TV-Message: 09/06/2008 01:00:56 - Tuning to transponder at 99000000 ...
Me TV-Message: 09/06/2008 01:00:56 - Waiting for signal lock ...
Me TV-Message: 09/06/2008 01:00:56 - Got signal lock
Me TV-Message: 09/06/2008 01:00:56 - Tuned to transponder at 99000000
Me TV-Message: 09/06/2008 01:00:56 - Streamer starting
Me TV-Message: 09/06/2008 01:00:56 - Video thread created
Me TV-Message: 09/06/2008 01:00:56 - About to open FIFO 'fifo://root/.me-tv/video.fifo' ...
Me TV-Message: 09/06/2008 01:00:56 - Stream thread created
Me TV-Message: 09/06/2008 01:00:56 - Trying to auto detect PIDs
Me TV-Message: 09/06/2008 01:00:56 - EPG thread created
Me TV-Message: 09/06/2008 01:00:56 - Channel changed to '[00da]'
Me TV-Message: 09/06/2008 01:00:56 - Found 12 associations
Segmentation fault
