mythbuntu-bugs team mailing list archive

[Thomas Mashos <tgm4883@xxxxxxxxx>]

*** This bug is a duplicate of bug 439163 ***
    https://bugs.launchpad.net/bugs/439163

** This bug has been marked a duplicate of bug 439163
   HVR-1300 HVR-3000 HVR-4000 broken in kernel

-- 
IR-receiver deaf
https://bugs.launchpad.net/bugs/448471
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to Mythbuntu.

Status in Mythbuntu, Ubuntu derivative focused upon MythTV: New

Bug description:
The ir-receiver is connected to an HVR-1300 seems not receiving commands even if it seems properly configured.
Release of Mythbuntu 64 that is running:  0.22.0~trunk22304 
Both hardware.conf and lircd.conf seem configured correctly
attached dmesg

# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Hauppauge HVR-1300"
REMOTE_MODULES="lirc_dev lirc_i2c"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_LIRCD_CONF="hauppauge/lircd.conf.hauppauge"
REMOTE_LIRCD_ARGS=""

#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""

#Enable lircd
START_LIRCD="true"

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"

#Try to load appropriate kernel modules
LOAD_MODULES="true"

# Default configuration files for your hardware if any
LIRCMD_CONF=""

#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""
_________________________________________________

#This configuration has been automatically generated via
#the Ubuntu LIRC package maintainer scripts.
#
#It includes the default configuration for the remote and/or
#transmitter that you have selected during package installation.
#
#Feel free to add any custom remotes to the configuration
#via additional include directives or below the existing
#Ubuntu include directives from your selected remote and/or
#transmitter.

#Configuration for the Hauppauge HVR-1300 remote:
include "/usr/share/lirc/remotes/hauppauge/lircd.conf.hauppauge"