← Back to team overview

mythbuntu-bugs team mailing list archive

[Bug 515194] Re: lcdproc does not shutdown imon(0038) lcd-display after system shutdown

 

Howdy, and thank you for helping to improve Mythbuntu by opening this
ticket.  After researching this quite a bit, I'm afraid that there is
absolutely nothing that the Mythbuntu team can do about this problem...
in fact, the expert on all things lcdproc has this problem and does not
know the solution either.  Leaving this ticket open would simply mislead
people that the Mythbuntu team is working on a fix, when in reality, if
a fix is ever found, Mythbuntu will inherit it from lcdproc, or where
ever else it is fixed.

See also: http://lcdproc.sourceforge.net/docs/stable-0-5-x-user.html#imonlcd-howto
See also: mailing list thread "[Lcdproc] Onexit=1 not working Ubuntu 9.10" (copied below)

>> Jarod, you've become my source for lirc knowledge (:} )
>> ... do you know if the behaviour described below has been investigated by the lirc team?  I'm nearly 100% positive that it's not a problem with lcdproc.   (Well, other than the fact that lcdproc relies upon the lirc usb driver...)
>
> I've looked at it a tiny bit, as have a few other folks. My own LCD
> device has this same problem, but the backlight doesn't come back on
> until *after* the machine is powered off, so I'm not quite sure how it
> could be the driver at fault. There's a specific 'shut off the
> display' string sent to the display by the lcdproc driver, iirc, so
> when the LCDd service is stopped on my box, the display goes off, then
> the machine powers off, then the display lights back up a bit later.
> That shut-off string matches what people have snooped under windows,
> so I'm mostly clueless as to what the problem is -- some sort of reset
> of the usb bus that happens when the kernel finally exits?
>
> Sadly, I just don't have time, energy or desire to investigate this
> one more myself right now. But its definitely not an oddity of how
> Ubuntu shuts down, or at least not one specific to Ubuntu, as it
> happens the same way with the distro I run too (Fedora 12, 64-bit).
> Don't see anything at a glance in Fedora's shutdown initscripts I
> could blame.
>
>
>> ----- Original Message ----
>>> Cc: lcdproc@xxxxxxxxxxxxxxxxxxxx
>>> Sent: Sat, February 27, 2010 11:22:59 AM
>>> Subject: Re: [Lcdproc] Onexit=1 not working Ubuntu 9.10
>>> ...
>>> > - Are you checking the "OnExit" actions by shutting down the computer
>>> > or by shutting down LCDd?  ( "sudo /etc/init.d/LCDd stop" is the
>>> > easiest way to check the exit behavior)
>>> I was checking it by shutting down the computer. When I shutdown the
>>> LCDd down it seems to be working perfectly.
>>>
>>> However when shutting down the computer, it seems that the action OnExit
>>> takes place, but after a second or so the display is kind of reset. For
>>> example, when setting onexit=2 so the LCD is switch off, during the
>>> shutdown process the LCD is shutdown, but as soon as it ends the
>>> backlight is back on.
>>>
>>> I have an Antec Fusion Remote Black. Is this a normal behaviour when
>>> using this case?
>>>
>>
>> From:
>>  http://lcdproc.sourceforge.net/docs/stable-0-5-x-user.html#imonlcd-howto
>>
>> "In many systems, the LCD backlight will remain on after the system is shutdown.
>> This behavior remains a mystery - somehow the lcd recieves a reset command (or
>> similar) AFTER LCDd is stopped."
>>
>> It's a known issue, with an unknown solution.  Since it behaves correctly when stopping the service, I don't believe that it's a problem, nor fixable, in lcdproc.  It could be lirc, or it could be some other wackiness in Ubuntu's shutdown process.
>>
>> There's a launchpad report (ubuntu bug system) filed on it (maybe by you?):
>>  https://bugs.launchpad.net/mythbuntu/+bug/515194
>>
>> I've added some info to that bug report.
>>
>> -Jonathan
> --
> Jarod Wilson

** Changed in: mythbuntu
   Importance: Undecided => Low

** Changed in: mythbuntu
       Status: New => Won't Fix

-- 
lcdproc does not shutdown imon(0038) lcd-display after system shutdown
https://bugs.launchpad.net/bugs/515194
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to Mythbuntu.

Status in Mythbuntu, Ubuntu derivative focused upon MythTV: Won't Fix

Bug description:
When I shut down Mythbuntu, LCD-display lights turn off for couple of seconds but then backlights turn on again and stay on after shutdown. Why this is happening? I have following parameters in LCDd.conf:

[imonlcd]
# Specify which iMon protocol should be used [legal: 0=15c2:ffdc device,
# 1=15c2:0038 device; default: 0]
Protocol=1

# Set the exit behavior [legal: 0=leave shutdown message, 1=show the big clock,
# 2=blank device; default: 1]
OnExit=2

lcdproc version information:

sami@sami-htpc:~$ apt-cache policy lcdproc
lcdproc:
  Asennettu: 0.5.3-0ubuntu1
  Ehdokas: 0.5.3-0ubuntu1
  Versiotaulukko:
 *** 0.5.3-0ubuntu1 0
        500 http://fi.archive.ubuntu.com karmic/universe Packages
        100 /var/lib/dpkg/status





References