mythbuntu-bugs team mailing list archive

[mh <mrhegstrom@xxxxxxxxx>]

Thanks guys - that worked great.  I am going to post this on a new thread on mythbuntu forums.  I just got lucky finding this.  I didn't thing to look for or notice the CPU pegging.  I just noticed my remote didn't work and couldn't find that anyone else had this problem.   Anyway this is what I did:
- the lirc_dev would not unload and wouldn't let the new package install correctly so I did this: 
-mythbuntu control center and uncheck the remote selection checkbox. (left lirc itself checked) 
-sudo mv /dev/init.d/lirc /dev/init.d/lirc-off 
-rebooted machine (so that lirc and lirc_dev doesn't load)
-Used synaptic to install all 5 of the new packages with the new lirc +ppa2 at the end (look in synaptic under /main /universe)
-sudo mv /dev/init.d/lirc-off /dev/init.d/lirc 
-go into mythbuntu control center, enable the remote and select the hauppauge TV card one.
-Reboot and check 

Guessing they are spending a lot of resources on fixing it cuz there
aren't too many of us "SD" TV watchers out there!.

-- 
Hauppauge TV Card is detected as Leadtek IR in lucid
https://bugs.launchpad.net/bugs/550369
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to lirc in ubuntu.

Status in “linux” package in Ubuntu: New
Status in “lirc” package in Ubuntu: Triaged
Status in “linux” source package in Lucid: New
Status in “lirc” source package in Lucid: New

Bug description:
Binary package hint: lirc

My Hauppage remote is detected as a "Leadtek IR" by lirc_i2c in Lucid

Mar 28 09:31:35 hyena kernel: [   41.177256] lirc_dev: IR Remote Control driver registered, major 61 
Mar 28 09:31:35 hyena kernel: [   41.727948] lirc_i2c: chip 0x0 found @ 0x18 (Leadtek IR)
Mar 28 09:31:35 hyena kernel: [   41.727952] lirc_dev: lirc_register_driver: sample_rate: 10

I found this post, which seems to lie out what the issue is:

http://www.gossamer-threads.com/lists/mythtv/users/427306