mythbuntu-bugs team mailing list archive
-
mythbuntu-bugs team
-
Mailing list archive
-
Message #02098
[Bug 486264] Re: tda1004x: timeout waiting for DSP ready
Lucid Mythbuntu is displaying same bug - firmware is there in
/lib/firmware but fails to load (see dmesg below). from other threads I
have come across some PPA kernels that seem to address this & am going
to attempt to use one of these. They can be found @
http://kernel.ububtu.com/~kernel-ppa/mainline/
Dmesg output (combined frontend/backend)
0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-22-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=2bcbd086-5ec9-446c-ab87-b2b2444b5c50 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CFFFF uncachable
[ 0.000000] D0000-D7FFF write-back
[ 0.000000] D8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 base 00F0000000 mask FFF8000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fef0000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fef0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fef0000 @ 10000-14000
[ 0.000000] RAMDISK: 377fd000 - 37fef711
[ 0.000000] ACPI: RSDP 00000000000f77d0 00014 (v00 VIAK8T)
[ 0.000000] ACPI: RSDT 000000007fef3040 00034 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000007fef30c0 00074 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000007fef3180 04F8A (v01 VIAK8T AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000007fef0000 00040
[ 0.000000] ACPI: BOOT 000000007fef8180 00028 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 000000007fef82c0 00118 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: APIC 000000007fef8200 00068 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fef0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fef0000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 0000000000026fdf] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fef0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64]
[ 0.000000] #3 [00377fd000 - 0037fef711] RAMDISK ==> [00377fd000 - 0037fef711]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0001a2a000 - 0001a2a0ba] BRK ==> [0001a2a000 - 0001a2a0ba]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000f36a0] f36a0
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fef0
[ 0.000000] On node 0 totalpages: 523903
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3825 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7109 pages used for memmap
[ 0.000000] DMA32 zone: 512811 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:7ed00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516636
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=2bcbd086-5ec9-446c-ab87-b2b2444b5c50 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ f0000000 old size 32 MB
[ 0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20)
[ 0.000000] Node 0: aperture @ f0000000 size 128 MB
[ 0.000000] Memory: 2047984k/2096064k available (5409k kernel code, 452k absent, 47628k reserved, 2976k data, 876k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 20971520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2451.924 MHz processor.
[ 0.020006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4903.84 BogoMIPS (lpj=24519240)
[ 0.020035] Security Framework initialized
[ 0.020057] AppArmor: AppArmor initialized
[ 0.020229] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.021879] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.022669] Mount-cache hash table entries: 256
[ 0.022818] Initializing cgroup subsys ns
[ 0.022823] Initializing cgroup subsys cpuacct
[ 0.022827] Initializing cgroup subsys memory
[ 0.022835] Initializing cgroup subsys devices
[ 0.022837] Initializing cgroup subsys freezer
[ 0.022839] Initializing cgroup subsys net_cls
[ 0.022859] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.022861] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.022863] CPU 0/0x0 -> Node 0
[ 0.022865] tseg: 007ff00000
[ 0.022868] mce: CPU supports 5 MCE banks
[ 0.022880] Performance Events: AMD PMU driver.
[ 0.022885] ... version: 0
[ 0.022887] ... bit width: 48
[ 0.022888] ... generic registers: 4
[ 0.022889] ... value mask: 0000ffffffffffff
[ 0.022891] ... max period: 00007fffffffffff
[ 0.022892] ... fixed-purpose events: 0
[ 0.022894] ... event mask: 000000000000000f
[ 0.022907] SMP alternatives: switching to UP code
[ 0.038348] ACPI: Core revision 20090903
[ 0.044985] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.044997] ftrace: allocating 22518 entries in 89 pages
[ 0.050055] Setting APIC routing to flat
[ 0.050866] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.150902] CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02
[ 0.160000] Brought up 1 CPUs
[ 0.160000] Total of 1 processors activated (4903.84 BogoMIPS).
[ 0.160000] CPU0 attaching NULL sched-domain.
[ 0.160000] devtmpfs: initialized
[ 0.160000] regulator: core version 0.5
[ 0.160000] Time: 2:48:02 Date: 05/17/10
[ 0.160000] NET: Registered protocol family 16
[ 0.160000] node 0 link 0: io port [1000, fffff]
[ 0.160000] TOM: 0000000080000000 aka 2048M
[ 0.160000] node 0 link 0: mmio [a0000, bffff]
[ 0.160000] node 0 link 0: mmio [80000000, ff70ffff]
[ 0.160000] bus: [00,ff] on node 0 link 0
[ 0.160000] bus: 00 index 0 io port: [0, ffff]
[ 0.160000] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.160000] bus: 00 index 2 mmio: [80000000, fcffffffff]
[ 0.160000] ACPI: bus type pci registered
[ 0.160000] PCI: Using configuration type 1 for base access
[ 0.160000] bio: create slab <bio-0> at 0
[ 0.160000] ACPI: EC: Look up EC in DSDT
[ 0.160000] ACPI: Interpreter enabled
[ 0.160000] ACPI: (supports S0 S3 S4 S5)
[ 0.160000] ACPI: Using IOAPIC for interrupt routing
[ 0.162547] ACPI: No dock devices found.
[ 0.162641] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.162687] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.162917] pci 0000:00:01.0: supports D1
[ 0.162951] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfb022000-0xfb0227ff]
[ 0.162984] pci 0000:00:0a.0: supports D1 D2
[ 0.163012] pci 0000:00:0e.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.163017] pci 0000:00:0e.0: reg 14 32bit mmio: [0xfb020000-0xfb0200ff]
[ 0.163035] pci 0000:00:0e.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.163048] pci 0000:00:0e.0: supports D1 D2
[ 0.163050] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.163053] pci 0000:00:0e.0: PME# disabled
[ 0.163082] pci 0000:00:0f.0: reg 10 io port: [0xe200-0xe207]
[ 0.163087] pci 0000:00:0f.0: reg 14 io port: [0xe800-0xe803]
[ 0.163092] pci 0000:00:0f.0: reg 18 io port: [0xe900-0xe907]
[ 0.163098] pci 0000:00:0f.0: reg 1c io port: [0xe000-0xe003]
[ 0.163103] pci 0000:00:0f.0: reg 20 io port: [0xe100-0xe10f]
[ 0.163109] pci 0000:00:0f.0: reg 24 io port: [0xd400-0xd4ff]
[ 0.163168] pci 0000:00:0f.1: reg 20 io port: [0xe300-0xe30f]
[ 0.163233] pci 0000:00:10.0: reg 20 io port: [0xe400-0xe41f]
[ 0.163253] pci 0000:00:10.0: supports D1 D2
[ 0.163254] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.163257] pci 0000:00:10.0: PME# disabled
[ 0.163293] pci 0000:00:10.1: reg 20 io port: [0xe500-0xe51f]
[ 0.163313] pci 0000:00:10.1: supports D1 D2
[ 0.163314] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.163317] pci 0000:00:10.1: PME# disabled
[ 0.163353] pci 0000:00:10.2: reg 20 io port: [0xe600-0xe61f]
[ 0.163372] pci 0000:00:10.2: supports D1 D2
[ 0.163374] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.163377] pci 0000:00:10.2: PME# disabled
[ 0.163413] pci 0000:00:10.3: reg 20 io port: [0xe700-0xe71f]
[ 0.163432] pci 0000:00:10.3: supports D1 D2
[ 0.163434] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.163437] pci 0000:00:10.3: PME# disabled
[ 0.163461] pci 0000:00:10.4: reg 10 32bit mmio: [0xfb021000-0xfb0210ff]
[ 0.163492] pci 0000:00:10.4: supports D1 D2
[ 0.163494] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.163497] pci 0000:00:10.4: PME# disabled
[ 0.163550] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.163597] pci 0000:00:11.5: reg 10 io port: [0xd800-0xd8ff]
[ 0.163634] pci 0000:00:11.5: supports D1 D2
[ 0.163724] pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
[ 0.163728] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.163732] pci 0000:01:00.0: reg 18 32bit mmio: [0xf9000000-0xf9ffffff]
[ 0.163742] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.163783] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfaffffff]
[ 0.163787] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.163796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.210812] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
[ 0.210954] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 0.211097] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 6 7 10 11 12)
[ 0.211219] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.211338] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.211451] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.211576] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 *10 11 12)
[ 0.211688] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.211842] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 0.211985] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 0.212127] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 0.212300] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[ 0.212398] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.212401] vgaarb: loaded
[ 0.212503] SCSI subsystem initialized
[ 0.212580] libata version 3.00 loaded.
[ 0.212642] usbcore: registered new interface driver usbfs
[ 0.212656] usbcore: registered new interface driver hub
[ 0.212677] usbcore: registered new device driver usb
[ 0.212782] ACPI: WMI: Mapper loaded
[ 0.212783] PCI: Using ACPI for IRQ routing
[ 0.212792] pci 0000:00:00.0: BAR 0: address space collision on of device [0xf0000000-0xf7ffffff]
[ 0.212794] pci 0000:00:00.0: BAR 0: can't allocate resource
[ 0.212918] NetLabel: Initializing
[ 0.212920] NetLabel: domain hash size = 128
[ 0.212921] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.212933] NetLabel: unlabeled traffic allowed by default
[ 0.214411] AppArmor: AppArmor Filesystem Enabled
[ 0.214431] pnp: PnP ACPI init
[ 0.214449] ACPI: bus type pnp registered
[ 0.214792] pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
[ 0.214796] pnp 00:00: mem resource (0xdd000-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
[ 0.214799] pnp 00:00: mem resource (0xf0000-0xfbfff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
[ 0.214802] pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
[ 0.214805] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
[ 0.214808] pnp 00:00: mem resource (0x100000-0x7feeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x7ffffff), disabling
[ 0.217133] pnp: PnP ACPI: found 11 devices
[ 0.217135] ACPI: ACPI bus type pnp unregistered
[ 0.217146] system 00:00: iomem range 0x7ff00000-0x7fffffff could not be reserved
[ 0.217149] system 00:00: iomem range 0x7fef0000-0x7fefffff could not be reserved
[ 0.217152] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.217154] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.217157] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.217159] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.217165] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 0.217168] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 0.217172] system 00:03: ioport range 0xb78-0xb7b has been reserved
[ 0.217175] system 00:03: ioport range 0xf78-0xf7b has been reserved
[ 0.217177] system 00:03: ioport range 0xa78-0xa7b has been reserved
[ 0.217180] system 00:03: ioport range 0xe78-0xe7b has been reserved
[ 0.217182] system 00:03: ioport range 0xbbc-0xbbf has been reserved
[ 0.217188] system 00:03: ioport range 0xfbc-0xfbf has been reserved
[ 0.217191] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.217193] system 00:03: ioport range 0x290-0x297 has been reserved
[ 0.221863] Switching to clocksource acpi_pm
[ 0.221969] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.221971] pci 0000:00:01.0: IO window: disabled
[ 0.221975] pci 0000:00:01.0: MEM window: 0xf8000000-0xfaffffff
[ 0.221979] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xefffffff
[ 0.221992] pci 0000:00:01.0: setting latency timer to 64
[ 0.221996] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.221998] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.222001] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfaffffff]
[ 0.222003] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.222041] NET: Registered protocol family 2
[ 0.222153] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.222965] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.226254] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.227026] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.227029] TCP reno registered
[ 0.227135] NET: Registered protocol family 1
[ 0.227164] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.227251] pci 0000:01:00.0: Boot video device
[ 0.227373] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282]
[ 0.229982] Trying to unpack rootfs image as initramfs...
[ 0.240115] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 0.240193] Simple Boot Flag at 0x37 set to 0x80
[ 0.240292] Scanning for low memory corruption every 60 seconds
[ 0.240412] audit: initializing netlink socket (disabled)
[ 0.240425] type=2000 audit(1274064482.240:1): initialized
[ 0.248206] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.261275] VFS: Disk quotas dquot_6.5.2
[ 0.261333] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.261871] fuse init (API version 7.13)
[ 0.261936] msgmni has been set to 3999
[ 0.262129] alg: No test for stdrng (krng)
[ 0.262175] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.262177] io scheduler noop registered
[ 0.262179] io scheduler anticipatory registered
[ 0.262181] io scheduler deadline registered
[ 0.262212] io scheduler cfq registered (default)
[ 0.262339] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.262357] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.262436] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.262440] ACPI: Power Button [PWRB]
[ 0.262486] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.262488] ACPI: Power Button [PWRF]
[ 0.262768] processor LNXCPU:00: registered as cooling_device0
[ 0.266482] Linux agpgart interface v0.103
[ 0.266512] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.267489] brd: module loaded
[ 0.267857] loop: module loaded
[ 0.267937] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.268364] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 0.268369] alloc irq_desc for 20 on node 0
[ 0.268371] alloc kstat_irqs on node 0
[ 0.268379] pata_acpi 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 0.268428] pata_acpi 0000:00:0f.1: PCI INT A disabled
[ 0.280483] Fixed MDIO Bus: probed
[ 0.280517] PPP generic driver version 2.4.2
[ 0.280585] tun: Universal TUN/TAP device driver, 1.6
[ 0.280586] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.280672] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.280742] alloc irq_desc for 21 on node 0
[ 0.280744] alloc kstat_irqs on node 0
[ 0.280751] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.280770] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.280800] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 0.280871] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfb021000
[ 0.300046] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.300188] usb usb1: configuration #1 chosen from 1 choice
[ 0.300217] hub 1-0:1.0: USB hub found
[ 0.300227] hub 1-0:1.0: 8 ports detected
[ 0.300321] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.300336] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.310257] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.310269] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.310347] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.310374] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e400
[ 0.310474] usb usb2: configuration #1 chosen from 1 choice
[ 0.310503] hub 2-0:1.0: USB hub found
[ 0.310511] hub 2-0:1.0: 2 ports detected
[ 0.310612] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.310617] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.310654] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.310672] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e500
[ 0.310751] usb usb3: configuration #1 chosen from 1 choice
[ 0.310771] hub 3-0:1.0: USB hub found
[ 0.310776] hub 3-0:1.0: 2 ports detected
[ 0.310836] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.310841] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.310873] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 0.310891] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e600
[ 0.310971] usb usb4: configuration #1 chosen from 1 choice
[ 0.310992] hub 4-0:1.0: USB hub found
[ 0.310998] hub 4-0:1.0: 2 ports detected
[ 0.311063] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.311068] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.311097] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 0.311115] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e700
[ 0.311205] usb usb5: configuration #1 chosen from 1 choice
[ 0.311225] hub 5-0:1.0: USB hub found
[ 0.311231] hub 5-0:1.0: 2 ports detected
[ 0.311312] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.313577] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.313582] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.313653] mice: PS/2 mouse device common for all mice
[ 0.313728] rtc_cmos 00:05: RTC can wake from S4
[ 0.313766] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.313815] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.313941] device-mapper: uevent: version 1.0.3
[ 0.317236] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 0.318757] device-mapper: multipath: version 1.1.0 loaded
[ 0.318761] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.324967] cpuidle: using governor ladder
[ 0.324970] cpuidle: using governor menu
[ 0.325333] TCP cubic registered
[ 0.325450] NET: Registered protocol family 10
[ 0.325857] lo: Disabled Privacy Extensions
[ 0.326123] NET: Registered protocol family 17
[ 0.326156] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (1 cpu cores) (version 2.20.00)
[ 0.326205] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6
[ 0.326207] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8
[ 0.326208] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
[ 0.326210] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc
[ 0.326212] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
[ 0.326331] PM: Resume from disk failed.
[ 0.326342] registered taskstats version 1
[ 0.326604] Magic number: 10:267:814
[ 0.326692] rtc_cmos 00:05: setting system clock to 2010-05-17 02:48:02 UTC (1274064482)
[ 0.326694] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.326696] EDD information not available.
[ 0.341016] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.424384] Freeing initrd memory: 8137k freed
[ 0.429928] Freeing unused kernel memory: 876k freed
[ 0.430568] Write protecting the kernel read-only data: 7680k
[ 0.449057] udev: starting version 151
[ 0.617747] Floppy drive(s): fd0 is 1.44M
[ 0.623834] VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.14
[ 0.623838] Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
[ 0.623840] Copyright (c) 2004 Red Hat Inc.
[ 0.623854] alloc irq_desc for 22 on node 0
[ 0.623856] alloc kstat_irqs on node 0
[ 0.623863] via-velocity 0000:00:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.625009] eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
[ 0.625012] eth0: Ethernet Address: 00:50:8D:D5:19:72
[ 0.633849] FDC 0 is a post-1991 82077
[ 0.640436] sata_via 0000:00:0f.0: version 2.4
[ 0.640454] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 0.640490] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 0.640564] scsi0 : sata_via
[ 0.640718] scsi1 : sata_via
[ 0.640754] ata1: SATA max UDMA/133 cmd 0xe200 ctl 0xe800 bmdma 0xe100 irq 20
[ 0.640757] ata2: SATA max UDMA/133 cmd 0xe900 ctl 0xe000 bmdma 0xe108 irq 20
[ 0.640965] pata_via 0000:00:0f.1: version 0.3.4
[ 0.640975] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 0.641129] scsi2 : pata_via
[ 0.641219] scsi3 : pata_via
[ 0.642590] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe300 irq 14
[ 0.642593] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe308 irq 15
[ 0.840015] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 0.850012] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.856606] ata3.00: ATA-7: ST3160815A, 3.AAD, max UDMA/100
[ 0.856609] ata3.00: 312581808 sectors, multi 16: LBA48
[ 0.940095] ata3.00: configured for UDMA/100
[ 1.021690] usb 3-2: configuration #1 chosen from 1 choice
[ 1.036115] usbcore: registered new interface driver hiddev
[ 1.036447] usbcore: registered new interface driver usbhid
[ 1.036514] usbhid: v2.6:USB HID core driver
[ 1.071865] ata1.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133
[ 1.071868] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.163496] ata1.00: configured for UDMA/133
[ 1.163592] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
[ 1.163725] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.163937] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.163973] sd 0:0:0:0: [sda] Write Protect is off
[ 1.163975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.163994] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.164104] sda: sda2 < sda5 sda6 >
[ 1.204460] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.370017] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.380674] scsi 2:0:0:0: Direct-Access ATA ST3160815A 3.AA PQ: 0 ANSI: 5
[ 1.380789] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.381047] sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.381081] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.381083] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.381101] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.381206] sdb: sdb1
[ 1.404036] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.560420] ata4.00: ATAPI: HL-DT-STDVD-RAM GSA-H55N, 1.00, max UDMA/66
[ 1.600308] ata4.00: configured for UDMA/66
[ 1.602736] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H55N 1.00 PQ: 0 ANSI: 5
[ 1.606899] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.606902] Uniform CD-ROM driver Revision: 3.20
[ 1.606992] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.607040] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 1.634810] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input4
[ 1.634898] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.1-2/input0
[ 1.666489] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 1.667659] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input5
[ 1.668140] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-2/input1
[ 1.840466] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[ 3.343744] Adding 2923788k swap on /dev/sda5. Priority:-1 extents:1 across:2923788k
[ 3.630813] udev: starting version 151
[ 4.523986] lp: driver loaded but no devices found
[ 4.898401] EDAC MC: Ver: 2.1.0 Apr 28 2010
[ 4.902715] EDAC amd64_edac: Ver: 3.2.0 Apr 28 2010
[ 4.902795] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 4.902800] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.902801] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.902802] (Note that use of the override may cause unknown side effects.)
[ 4.902820] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 4.948991] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.197023] type=1505 audit(1274064487.363:2): operation="profile_load" pid=451 name="/sbin/dhclient3"
[ 5.197257] type=1505 audit(1274064487.363:3): operation="profile_load" pid=451 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 5.197388] type=1505 audit(1274064487.363:4): operation="profile_load" pid=451 name="/usr/lib/connman/scripts/dhclient-script"
[ 5.542946] type=1505 audit(1274064487.713:5): operation="profile_load" pid=607 name="/usr/sbin/ntpd"
[ 5.663087] vga16fb: initializing
[ 5.663096] vga16fb: mapped to 0xffff8800000a0000
[ 5.663250] fb0: VGA16 VGA frame buffer device
[ 6.435174] nvidia: module license 'NVIDIA' taints kernel.
[ 6.435178] Disabling lock debugging due to kernel taint
[ 7.050604] alloc irq_desc for 16 on node 0
[ 7.050607] alloc kstat_irqs on node 0
[ 7.050614] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.050624] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.051714] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010
[ 7.103182] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 7.191830] Linux video capture interface: v2.00
[ 7.359504] Console: switching to colour frame buffer device 80x30
[ 7.601547] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 7.601635] alloc irq_desc for 18 on node 0
[ 7.601637] alloc kstat_irqs on node 0
[ 7.601645] saa7134 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 7.601653] saa7133[0]: found at 0000:00:0a.0, rev: 209, irq: 18, latency: 32, mmio: 0xfb022000
[ 7.601659] saa7133[0]: subsystem: 1461:f01d, board: Avermedia Super 007 [card=117,autodetected]
[ 7.601675] saa7133[0]: board init: gpio is 40000
[ 7.601684] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 7.780014] saa7133[0]: i2c eeprom 00: 61 14 1d f0 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 7.780023] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[ 7.780029] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 55 ff ff ff ff
[ 7.780035] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780041] saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 02 15 16 ff ff ff ff ff ff
[ 7.780047] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780053] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780059] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780065] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780071] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780077] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780083] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780089] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780095] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780101] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780107] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 7.780115] i2c i2c-1: Invalid 7-bit address 0x7a
[ 8.885386] RPC: Registered udp transport module.
[ 8.885390] RPC: Registered tcp transport module.
[ 8.885392] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.960135] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[ 9.130014] tda829x 1-004b: setting tuner address to 60
[ 10.130023] tda829x 1-004b: type set to tda8290+75a
[ 10.456623] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 12.483082] type=1505 audit(1274064494.653:6): operation="profile_replace" pid=802 name="/sbin/dhclient3"
[ 12.483327] type=1505 audit(1274064494.653:7): operation="profile_replace" pid=802 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 12.483463] type=1505 audit(1274064494.653:8): operation="profile_replace" pid=802 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.747714] type=1505 audit(1274064494.913:9): operation="profile_load" pid=803 name="/usr/bin/evince"
[ 12.751395] type=1505 audit(1274064494.923:10): operation="profile_load" pid=803 name="/usr/bin/evince-previewer"
[ 12.753361] type=1505 audit(1274064494.923:11): operation="profile_load" pid=803 name="/usr/bin/evince-thumbnailer"
[ 12.903199] type=1505 audit(1274064495.073:12): operation="profile_load" pid=805 name="/usr/sbin/mysqld"
[ 12.913728] type=1505 audit(1274064495.083:13): operation="profile_load" pid=806 name="/usr/sbin/mysqld-akonadi"
[ 12.915443] type=1505 audit(1274064495.083:14): operation="profile_replace" pid=807 name="/usr/sbin/ntpd"
[ 13.836034] Velocity is AUTO mode
[ 15.433347] eth0: Link auto-negotiation speed 100M bps full duplex
[ 15.790212] saa7133[0]: registered device video0 [v4l2]
[ 15.790282] saa7133[0]: registered device vbi0
[ 15.793031] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 15.793166] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 15.851611] saa7134 ALSA driver for DMA sound loaded
[ 15.851627] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 15.851649] saa7133[0]/alsa: saa7133[0] at 0xfb022000 irq 18 registered as card -2
[ 16.042394] dvb_init() allocating 1 frontend
[ 16.280157] DVB: registering new adapter (saa7133[0])
[ 16.280164] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 16.600049] tda1004x: setting up plls for 48MHz sampling clock
[ 16.790631] svc: failed to register lockdv1 RPC service (errno 97).
[ 16.791349] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 16.795861] NFSD: starting 90-second grace period
[ 18.225621] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 18.225635] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 18.225697] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 19.380098] tda1004x: timeout waiting for DSP ready
[ 19.480030] tda1004x: found firmware revision 0 -- invalid
[ 19.480034] tda1004x: trying to boot from eeprom
[ 20.578915] __ratelimit: 3 callbacks suppressed
[ 20.578919] type=1503 audit(1274064502.743:16): operation="capable" pid=1110 parent=1 profile="/usr/sbin/ntpd" name="dac_override"
[ 21.850043] tda1004x: timeout waiting for DSP ready
[ 21.950070] tda1004x: found firmware revision 0 -- invalid
[ 21.950074] tda1004x: waiting for firmware upload...
[ 21.950079] saa7134 0000:00:0a.0: firmware: requesting dvb-fe-tda10046.fw
[ 23.950012] tda1004x: setting up plls for 48MHz sampling clock
[ 24.120018] eth0: no IPv6 routers present
[ 26.550018] tda1004x: timeout waiting for DSP ready
[ 26.650038] tda1004x: found firmware revision 0 -- invalid
[ 26.650042] tda1004x: trying to boot from eeprom
[ 29.030044] tda1004x: timeout waiting for DSP ready
[ 29.132594] tda1004x: found firmware revision 0 -- invalid
[ 29.132598] tda1004x: waiting for firmware upload...
[ 29.132604] saa7134 0000:00:0a.0: firmware: requesting dvb-fe-tda10046.fw
[ 31.040021]
[ 31.040025] floppy driver state
[ 31.040026] -------------------
[ 31.040029] now=4294940400 last interrupt=4294937359 diff=3041 last called handler=ffffffffa00298e0
[ 31.040031] timeout_message=lock fdc
[ 31.040032] last output bytes:
[ 31.040034] 8 80 4294937357
[ 31.040035] 8 80 4294937357
[ 31.040036] 8 80 4294937357
[ 31.040038] 8 80 4294937359
[ 31.040039] 8 80 4294937359
[ 31.040040] 8 80 4294937359
[ 31.040041] 8 80 4294937359
[ 31.040042] e 80 4294937359
[ 31.040044] 13 80 4294937359
[ 31.040045] 0 90 4294937359
[ 31.040046] 1a 90 4294937359
[ 31.040047] 0 90 4294937359
[ 31.040048] 12 90 4294937359
[ 31.040049] 0 90 4294937359
[ 31.040051] 14 90 4294937359
[ 31.040052] 18 80 4294937359
[ 31.040053] 8 80 4294937359
[ 31.040054] 8 80 4294937359
[ 31.040055] 8 80 4294937359
[ 31.040056] 8 80 4294937359
[ 31.040058] last result at 4294937359
[ 31.040059] last redo_fd_request at 4294937359
[ 31.040060]
[ 31.040068] status=80
[ 31.040069] fdc_busy=1
[ 31.040070] floppy_work.func=ffffffffa002d8a0
[ 31.040071] cont=ffffffffa0031420
[ 31.040072] current_req=(null)
[ 31.040074] command_status=-1
[ 31.040075]
[ 31.040078] floppy0: floppy timeout called
[ 31.040080] floppy.c: no request in request_done
[ 34.040023]
[ 34.040027] floppy driver state
[ 34.040028] -------------------
[ 34.040031] now=4294940700 last interrupt=4294940400 diff=300 last called handler=ffffffffa00298e0
[ 34.040033] timeout_message=redo fd request
[ 34.040034] last output bytes:
[ 34.040036] 8 80 4294937359
[ 34.040037] 8 80 4294937359
[ 34.040039] 8 80 4294937359
[ 34.040040] e 80 4294937359
[ 34.040041] 13 80 4294937359
[ 34.040042] 0 90 4294937359
[ 34.040043] 1a 90 4294937359
[ 34.040045] 0 90 4294937359
[ 34.040046] 12 90 4294937359
[ 34.040047] 0 90 4294937359
[ 34.040048] 14 90 4294937359
[ 34.040049] 18 80 4294937359
[ 34.040050] 8 80 4294937359
[ 34.040052] 8 80 4294937359
[ 34.040053] 8 80 4294937359
[ 34.040054] 8 80 4294937359
[ 34.040055] 8 80 4294940400
[ 34.040056] 8 80 4294940400
[ 34.040058] 8 80 4294940400
[ 34.040059] 8 80 4294940400
[ 34.040060] last result at 4294940400
[ 34.040061] last redo_fd_request at 4294940400
[ 34.040062] c3 0
[ 34.040071] status=80
[ 34.040072] fdc_busy=1
[ 34.040073] floppy_work.func=ffffffffa00298e0
[ 34.040074] cont=ffffffffa0031420
[ 34.040075] current_req=ffff88007b984d20
[ 34.040077] command_status=-1
[ 34.040078]
[ 34.040081] floppy0: floppy timeout called
[ 34.040086] end_request: I/O error, dev fd0, sector 0
[ 37.040011]
[ 37.040015] floppy driver state
[ 37.040017] -------------------
[ 37.040019] now=4294941000 last interrupt=4294940400 diff=600 last called handler=ffffffffa00298e0
[ 37.040022] timeout_message=lock fdc
[ 37.040023] last output bytes:
[ 37.040024] 8 80 4294937359
[ 37.040026] 8 80 4294937359
[ 37.040027] 8 80 4294937359
[ 37.040028] e 80 4294937359
[ 37.040029] 13 80 4294937359
[ 37.040031] 0 90 4294937359
[ 37.040032] 1a 90 4294937359
[ 37.040033] 0 90 4294937359
[ 37.040034] 12 90 4294937359
[ 37.040035] 0 90 4294937359
[ 37.040037] 14 90 4294937359
[ 37.040038] 18 80 4294937359
[ 37.040039] 8 80 4294937359
[ 37.040040] 8 80 4294937359
[ 37.040041] 8 80 4294937359
[ 37.040042] 8 80 4294937359
[ 37.040044] 8 80 4294940400
[ 37.040045] 8 80 4294940400
[ 37.040046] 8 80 4294940400
[ 37.040047] 8 80 4294940400
[ 37.040048] last result at 4294940400
[ 37.040049] last redo_fd_request at 4294940700
[ 37.040051] c3 0
[ 37.040059] status=80
[ 37.040060] fdc_busy=1
[ 37.040061] floppy_work.func=ffffffffa002d8a0
[ 37.040063] cont=ffffffffa0031420
[ 37.040064] current_req=(null)
[ 37.040065] command_status=-1
[ 37.040066]
[ 37.040069] floppy0: floppy timeout called
[ 37.040072] floppy.c: no request in request_done
[ 40.040011]
[ 40.040015] floppy driver state
[ 40.040017] -------------------
[ 40.040019] now=4294941300 last interrupt=4294941000 diff=300 last called handler=ffffffffa00298e0
[ 40.040022] timeout_message=redo fd request
[ 40.040023] last output bytes:
[ 40.040024] 13 80 4294937359
[ 40.040026] 0 90 4294937359
[ 40.040027] 1a 90 4294937359
[ 40.040028] 0 90 4294937359
[ 40.040029] 12 90 4294937359
[ 40.040030] 0 90 4294937359
[ 40.040032] 14 90 4294937359
[ 40.040033] 18 80 4294937359
[ 40.040034] 8 80 4294937359
[ 40.040035] 8 80 4294937359
[ 40.040036] 8 80 4294937359
[ 40.040038] 8 80 4294937359
[ 40.040039] 8 80 4294940400
[ 40.040040] 8 80 4294940400
[ 40.040041] 8 80 4294940400
[ 40.040042] 8 80 4294940400
[ 40.040043] 8 80 4294941000
[ 40.040045] 8 80 4294941000
[ 40.040046] 8 80 4294941000
[ 40.040047] 8 80 4294941000
[ 40.040048] last result at 4294941000
[ 40.040049] last redo_fd_request at 4294941000
[ 40.040050] c3 0
[ 40.040059] status=80
[ 40.040060] fdc_busy=1
[ 40.040061] floppy_work.func=ffffffffa00298e0
[ 40.040062] cont=ffffffffa0031420
[ 40.040063] current_req=ffff88007b984d20
[ 40.040065] command_status=-1
[ 40.040066]
[ 40.040069] floppy0: floppy timeout called
[ 40.040073] end_request: I/O error, dev fd0, sector 0
[ 43.040015]
[ 43.040019] floppy driver state
[ 43.040021] -------------------
[ 43.040024] now=4294941600 last interrupt=4294941000 diff=600 last called handler=ffffffffa00298e0
[ 43.040026] timeout_message=lock fdc
[ 43.040027] last output bytes:
[ 43.040029] 13 80 4294937359
[ 43.040030] 0 90 4294937359
[ 43.040031] 1a 90 4294937359
[ 43.040032] 0 90 4294937359
[ 43.040034] 12 90 4294937359
[ 43.040035] 0 90 4294937359
[ 43.040036] 14 90 4294937359
[ 43.040037] 18 80 4294937359
[ 43.040038] 8 80 4294937359
[ 43.040039] 8 80 4294937359
[ 43.040041] 8 80 4294937359
[ 43.040042] 8 80 4294937359
[ 43.040043] 8 80 4294940400
[ 43.040044] 8 80 4294940400
[ 43.040045] 8 80 4294940400
[ 43.040047] 8 80 4294940400
[ 43.040048] 8 80 4294941000
[ 43.040049] 8 80 4294941000
[ 43.040050] 8 80 4294941000
[ 43.040051] 8 80 4294941000
[ 43.040052] last result at 4294941000
[ 43.040053] last redo_fd_request at 4294941300
[ 43.040055] c3 0
[ 43.040063] status=80
[ 43.040064] fdc_busy=1
[ 43.040066] floppy_work.func=ffffffffa002e860
[ 43.040067] cont=ffffffffa0031c80
[ 43.040068] current_req=(null)
[ 43.040069] command_status=-1
[ 43.040070]
[ 43.040074] floppy0: floppy timeout called
[ 63.040012]
[ 63.040016] floppy driver state
[ 63.040017] -------------------
[ 63.040020] now=4294943600 last interrupt=4294941000 diff=2600 last called handler=ffffffffa00298e0
[ 63.040022] timeout_message=do wakeup
[ 63.040023] last output bytes:
[ 63.040025] 13 80 4294937359
[ 63.040026] 0 90 4294937359
[ 63.040028] 1a 90 4294937359
[ 63.040029] 0 90 4294937359
[ 63.040030] 12 90 4294937359
[ 63.040031] 0 90 4294937359
[ 63.040032] 14 90 4294937359
[ 63.040033] 18 80 4294937359
[ 63.040035] 8 80 4294937359
[ 63.040036] 8 80 4294937359
[ 63.040037] 8 80 4294937359
[ 63.040038] 8 80 4294937359
[ 63.040039] 8 80 4294940400
[ 63.040041] 8 80 4294940400
[ 63.040042] 8 80 4294940400
[ 63.040043] 8 80 4294940400
[ 63.040044] 8 80 4294941000
[ 63.040045] 8 80 4294941000
[ 63.040046] 8 80 4294941000
[ 63.040048] 8 80 4294941000
[ 63.040049] last result at 4294941000
[ 63.040050] last redo_fd_request at 4294941300
[ 63.040051] c3 0
[ 63.040060] status=80
[ 63.040061] fdc_busy=1
[ 63.040062] floppy_work.func=ffffffffa002d8a0
[ 63.040063] cont=ffffffffa0031420
[ 63.040065] current_req=(null)
[ 63.040066] command_status=-1
[ 63.040067]
[ 63.040070] floppy0: floppy timeout called
[ 63.040072] floppy.c: no request in request_done
[ 84.650019] Clocksource tsc unstable (delta = -169052689 ns)
[ 86.540027] tda1004x: timeout waiting for DSP ready
[ 86.640022] tda1004x: found firmware revision 0 -- invalid
[ 86.640027] tda1004x: firmware upload failed
[ 88.860024] tda1004x: timeout waiting for DSP ready
[ 89.360027] tda1004x: found firmware revision 80 -- invalid
[ 89.360033] tda1004x: firmware upload failed
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to mythtv in ubuntu.
Status in “mythtv” package in Ubuntu: Incomplete
Bug description:
Binary package hint: mythtv
MythTV causes problem with DVB-T card firmware. Symptoms are as follows:
1) After mythtv installation everything works fine for many restarts (few days)
2) Suddenly, firmware is not loaded. dmesg gives
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 80 -- invalid
tda1004x: firmware upload failed
3) Uninstall and reinstall of mythtv package revert this state so card (and mythtv) is working again well. dmesg gives
tda1004x: found firmware revision 20 -- ok
I repeated this 1-2-3 cycle three or four times since karmic-koala install.
===========================
Using:
Ubuntu 9.10 Karmic Koala
mythtv 0.22.0 (both backend and frontend)
tv card: AVerTV Digi Super 007 [Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)]
firmware: /lib/firmware/dvb-fe-tda10046.fw installed from linux-firmware-nonfree package
