mythbuntu-bugs team mailing list archive

[Jarno Suni <8@xxxxxx>]

And the workaround does not work in 10.04 so I don't know how to make
10.04 work as well as 9.04.

-- 
USB device attached to different ttyUSB after resume from suspend to RAM
https://bugs.launchpad.net/bugs/359356
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to lirc in ubuntu.

Status in “lirc” package in Ubuntu: New

Bug description:
Update: As for Xubuntu 10.04 at least, please read comment #5 

OS: 8.10

USB device is attached to /dev/ttyUSB0 when I plug it in USB port. But when I suspend to RAM and resume, it gets attached to /dev/ttyUSB1. Consequently, the daemon configured using /dev/ttyUSB0 does not work after resume. I would expect the device to be attached to the same ttyUSB before and after.

Details of the device (from output of lsusb -v):

Bus 003 Device 010: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0403 Future Technology Devices International, Ltd
  idProduct          0x6001 FT232 USB-Serial (UART) IC
  bcdDevice            6.00
  iManufacturer           1 FTDI
  iProduct                2 FT232R USB UART
  iSerial                 3 A5001qxI
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower               90mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              2 FT232R USB UART
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered)