mythbuntu-bugs team mailing list archive

[Gunars Rodins <458444@xxxxxxxxxxxxxxxxxx>]

Still in 4.95 firmware fails in hardware level if someway in attempt to
scan channels it has tuned on frequency, but has not managed in set
timeout (default 3 sec) to identify digital channels. So after it gets

af9015: recv bulk message failed:-71

If this happends, only what helps - plug out hardware off power for 2
min.

Reboots and other things doesnot help - you will get "af9015: command
failed:2" (in MythTV tuner will hang in "I__" state or "LMs_" state.

> dmesg |grep af
[    6.271426] af9013: firmware version:4.95.0
[    6.883379] af9013: found a 'Afatech AF9013 DVB-T' in warm state.
[    6.886368] af9013: firmware version:4.95.0
[    6.899866] af9015: command failed:2
[    6.903617] af9015: command failed:2
[    7.130711] af9013: firmware version:4.95.0
[    7.708393] af9013: found a 'Afatech AF9013 DVB-T' in warm state.
[    7.711028] af9013: firmware version:4.95.0
[    7.724643] af9015: command failed:2
[    7.728392] af9015: command failed:2
[    7.738046] usbcore: registered new interface driver dvb_usb_af9015
[   17.752743] af9015: recv bulk message failed:-71
[   17.752990] af9015: recv bulk message failed:-75
[   17.752992] af9013: I2C read failed reg:d417
[   25.379433] af9015: recv bulk message failed:-71
[   25.379677] af9015: recv bulk message failed:-75
[   25.379679] af9013: I2C read failed reg:d417

-- 
dvb-usb-af9015 should be updated to the latest version to resolve some issues
https://bugs.launchpad.net/bugs/458444
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to linux-firmware-nonfree in ubuntu.

Status in “linux-firmware-nonfree” package in Ubuntu: Fix Released

Bug description:
Binary package hint: linux-firmware-nonfree

The firmware that comes for af9015 is not the latest version and it has an issue that blasts dmesg with this two error messages:
af9015: command failed:255
dvb-usb: error while querying for an remote control event.

The latest firmware version 0.95 solves this issue:
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/