mythbuntu-bugs team mailing list archive

[Jarod Wilson <jarod@xxxxxxxxxxxx>]

OP: Note also though: devinput mode with the windows media center rc-6
keymap loaded isn't going to work at all with a TiVo remote. You need to
either load a tivo keymap (which I don't think exists until kernel
2.6.39 or .40), or just use the /dev/lirc0 method with the TiVo
lircd.conf you were previously using.

-- 
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to lirc in Ubuntu.
https://bugs.launchpad.net/bugs/778296

Title:
  lirc not working correctly on 2.6.38 kernel

Status in “lirc” package in Ubuntu:
  New

Bug description:
  Binary package hint: lirc

  lirc not working correctl y on 2.6.38 kernel. I reverted back to lirc
  not working correctly on 2.6.35 kernel and it starts working. I
  understand that mceusb is now part of kernel driver. So I have
  accordingly changed hardware.conf. I dont see anything on irw or ir-
  keytable -t when i press my remote(s). Tried multiple remotes to see
  the input. I can confirm that there is /dev/lirc0. When I do cat
  /dev/lirc0 and press remote I see garbage spew on the screen.

  My IR Receiver is
  Bus 003 Device 002: ID 0471:0815 Philips (or NXP) eHome Infrared Receiver

  # ir-keytable
  Found /sys/class/rc/rc0/ (/dev/input/event5) with:
          Driver mceusb, table rc-rc6-mce
          Supported protocols: NEC RC-5 RC-6 JVC SONY LIRC
          Enabled protocols: LIRC
          Repeat delay = 500 ms, repeat period = 33 ms

  
  # /etc/lirc/hardware.conf
  #
  #Chosen Remote Control
  REMOTE="Windows Media Center Transceivers/Remotes (all)"
  REMOTE_MODULES="lirc_dev mceusb"
  REMOTE_DRIVER="devinput"
  REMOTE_DEVICE="/dev/input/event5" (found using ir-keytable)
  REMOTE_SOCKET=""
  REMOTE_LIRCD_CONF="lircd.conf" (Copy /usr/share/lirc/remotes/devinput/lircd.conf.devinput to /etc/lirc/lircd.conf)
  REMOTE_LIRCD_ARGS=""

  #Chosen IR Transmitter
  TRANSMITTER=""
  TRANSMITTER_MODULES=""
  TRANSMITTER_DRIVER=""
  TRANSMITTER_DEVICE=""
  TRANSMITTER_SOCKET=""
  TRANSMITTER_LIRCD_CONF=""
  TRANSMITTER_LIRCD_ARGS=""

  #Enable lircd
  START_LIRCD="true"

  #Don't start lircmd even if there seems to be a good config file
  #START_LIRCMD="false"

  #Try to load appropriate kernel modules
  LOAD_MODULES="true"

  ProblemType: Bug
  DistroRelease: Ubuntu 11.04
  Package: lirc 0.8.7-0ubuntu4.1
  ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
  Uname: Linux 2.6.38-8-generic x86_64
  NonfreeKernelModules: nvidia
  Architecture: amd64
  Date: Fri May  6 01:12:38 2011
  InstallationMedia: Mythbuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100427.1)
  ProcEnviron:
   LANGUAGE=en_US:en
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: lirc
  UpgradeStatus: Upgraded to natty on 2011-05-02 (3 days ago)