← Back to team overview

mythbuntu-bugs team mailing list archive

[Bug 1308105] Re: Xfce resets TV mode to NULL when power cycled

 

The patch by jkampe68 (#109) did it for me. Here is my flow chart:

Downloaded the xfce4-settings_4.12.0.orig.tar.bz2
(https://launchpad.net/ubuntu/+archive/primary/+files/xfce4-settings_4.12.0.orig.tar.bz2)
and unpacked it.

Saved the Patch by jkampe68 (http://bug-
attachment.xfce.org/attachment.cgi?id=6590) as .patch file.

Navigated to xfce4-settings-4.12.0-orig/xfsettingsd/ and used the patch
command to patch the displays.c file.

Now "./configure --prefix=/usr --sysconfdir=/etc" until all dependencies were fulfilled.
Garcon can be found here: https://mirror.netcologne.de/xfce/src/xfce/garcon/0.5/garcon-0.5.0.tar.bz2

"make"

"sudo make install"

Now the /usr/bin/xfsettingsd was replaced and everything worked well
after reboot.

-- 
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to Mythbuntu.
https://bugs.launchpad.net/bugs/1308105

Title:
  Xfce resets TV mode to NULL when power cycled

Status in Mythbuntu:
  Confirmed
Status in xfce4-settings:
  Confirmed
Status in nvidia-graphics-drivers package in Ubuntu:
  Invalid
Status in nvidia-graphics-drivers-331 package in Ubuntu:
  Invalid
Status in xfce4-settings package in Ubuntu:
  Confirmed

Bug description:
  I had an HTPC with Mythbuntu 12.04 installed.  Upon upgrading a new
  behavior that if the TV is power cycled it no longer detects a link
  with the HTPC.

  When this happens I can find in the xorg log that there is an
  accompanying log item:

  [ 39829.509] (II) NVIDIA(0): Setting mode "NULL"

  After debugging with NVIDIA at
  https://devtalk.nvidia.com/default/topic/729955/linux/tv-stops-being-
  detected/ we've deteremined it's a X client that reacts to the RANDR
  events causing the mode to be set to NULL.

  Working through the list in an Xfce environment, the culprit is
  xfsettingsd.  If xfsettingsd is running, it causes the TV to come up
  in a NULL mode.  If it's killed, it remains in the mode it was
  previously running in.

  
  Until this is fixed, this behavior can be worked around with a simple shell script:
  ==============================
  #!/bin/sh
  #Fix TV state when HDMI link is lost.
  #By Mario Limonciello <superm1@xxxxxxxxxx>

  OUTPUT="HDMI-0"
  BAD_MODE="1280x720"
  GOOD_MODE="1920x1080"

  for MODE in $BAD_MODE $GOOD_MODE; do
   DISPLAY=:0 xrandr --output $OUTPUT --mode $MODE
   sleep 2
  done
  ==============================

To manage notifications about this bug go to:
https://bugs.launchpad.net/mythbuntu/+bug/1308105/+subscriptions