mythbuntu-bugs team mailing list archive
-
mythbuntu-bugs team
-
Mailing list archive
-
Message #10159
[Bug 1605934] Re: LIRC-Infrarot-Fernbedienung mit TV-Karte TT-budget CT2-4500 CI funktioniert nicht
/etc/lird.conf
#This configuration has been automatically generated via
#the Ubuntu LIRC package maintainer scripts.
#
#It includes the default configuration for the remote and/or
#transmitter that you have selected during package installation.
#
#Feel free to add any custom remotes to the configuration
#via additional include directives or below the existing
#Ubuntu include directives from your selected remote and/or
#transmitter.
#No default remote configuration was included for TechnoTrend USB IR receiver
#You will need to include your own custom configuration for
#this remote, and file a bug at https://bugs.launchpad.net/ubuntu/+source/lirc/+filebug
#No default remote configuration was included for Custom
#You will need to include your own custom configuration for
#this transmitter, and file a bug at https://bugs.launchpad.net/ubuntu/+source/lirc/+filebug
#
#
#
# this config file was automatically generated
# using lirc-0.8.3(default) on Wed Jul 2 21:51:15 2008
#
# contributed by
#
# brand: Technotrend
# model no. of remote control:
# devices being controlled by this remote: TV-Card
#
begin remote
name Technotrend
bits 6
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 889 889
zero 889 889
plead 889
pre_data_bits 7
pre_data 0x55
gap 113792
toggle_bit 2
frequency 36000
duty_cycle 50
begin codes
KEY_POWER 0x01 # Was: Power
KEY_MUTE 0x18 # Was: Mute
KEY_1 0x03 # Was: 1
KEY_2 0x04 # Was: 2
KEY_3 0x05 # Was: 3
KEY_4 0x06 # Was: 4
KEY_5 0x07 # Was: 5
KEY_6 0x08 # Was: 6
KEY_7 0x09 # Was: 7
KEY_8 0x0A # Was: 8
KEY_9 0x0B # Was: 9
KEY_0 0x0C # Was: 0
KEY_AUDIO 0x1A # Was: Audio
KEY_AGAIN 0x02 # Was: Repeat
KEY_VOLUMEDOWN 0x26 # Was: vol-
KEY_VOLUMEUP 0x25 # Was: vol+
KEY_TEXT 0x19 # Was: Text
KEY_CHANNELDOWN 0x24 # Was: ch-
KEY_CHANNELUP 0x23 # Was: ch+
KEY_EXIT 0x13 # Was: Exit
KEY_OK 0x0F # Was: OK
KEY_UP 0x0D # Was: Up
KEY_DOWN 0x11 # Was: Down
KEY_LEFT 0x0E # Was: Left
KEY_RIGHT 0x10 # Was: Right
KEY_RED 0x14 # Was: Red
KEY_GREEN 0x15 # Was: Green
KEY_YELLOW 0x16 # Was: Yellow
KEY_BLUE 0x17 # Was: Blue
KEY_RECORD 0x3A # Was: Record
KEY_PLAY 0x3B # Was: Play
KEY_STOP 0x3C # Was: Stop
KEY_INFO 0x12 # Was: Info
KEY_REWIND 0x3D # Was: Rew
KEY_PAUSE 0x3E # Was: Pause
KEY_FORWARD 0x3F # Was: Fwd
KEY_EPG 0x22 # Was: EPG
end codes
end remote
--
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to lirc in Ubuntu.
https://bugs.launchpad.net/bugs/1605934
Title:
LIRC-Infrarot-Fernbedienung mit TV-Karte TT-budget CT2-4500 CI
funktioniert nicht
Status in lirc package in Ubuntu:
New
Bug description:
1)
Ubuntu Mate 16.04 LTS
----------------------------
lsb_release -rd
Description: Ubuntu 16.04.1 LTS
Release: 16.04
2)
----------------------------------------------------
apt-cache policy lirc
lirc:
Installiert: 0.9.0-0ubuntu6
Installationskandidat: 0.9.0-0ubuntu6
Versionstabelle:
*** 0.9.0-0ubuntu6 500
500 http://de.archive.ubuntu.com/ubuntu xenial/universe amd64 Packages
100 /var/lib/dpkg/status
sudo apt-cache policy inputlirc
inputlirc:
Installiert: 23-2
Installationskandidat: 23-2
Versionstabelle:
*** 23-2 500
500 http://de.archive.ubuntu.com/ubuntu xenial/universe amd64 Packages
100 /var/lib/dpkg/status
sudo apt-cache policy lirc-x
lirc-x:
Installiert: 0.9.0-0ubuntu6
Installationskandidat: 0.9.0-0ubuntu6
Versionstabelle:
*** 0.9.0-0ubuntu6 500
500 http://de.archive.ubuntu.com/ubuntu xenial/universe amd64 Packages
100 /var/lib/dpkg/status
3) I expeted that this tv-card functions, because it is said that it is supported:
https://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-budget_CT2-4500_CI
The tv-card fworks but not the remote control.
4) Further information:
-----------------------------------------------------
dmesg | grep Technotrend
[ 3.731462] CORE cx23885[0]: subsystem: 13c2:3013, board: Technotrend TT-budget CT2-4500 CI [card=48,autodetected]
[ 4.577822] Technotrend TT-budget CT2-4500 CI MAC address: bc:ea:2b:45:04:dd
--------------------------------------------------
/etc/lircd.conf
#This configuration has been automatically generated via
#the Ubuntu LIRC package maintainer scripts.
#
#It includes the default configuration for the remote and/or
#transmitter that you have selected during package installation.
#
#Feel free to add any custom remotes to the configuration
#via additional include directives or below the existing
#Ubuntu include directives from your selected remote and/or
#transmitter.
#No default remote configuration was included for TechnoTrend USB IR receiver
#You will need to include your own custom configuration for
#this remote, and file a bug at https://bugs.launchpad.net/ubuntu/+source/lirc/+filebug
#No default remote configuration was included for Custom
#You will need to include your own custom configuration for
#this transmitter, and file a bug at https://bugs.launchpad.net/ubuntu/+source/lirc/+filebug
-------------------------------------
/etc/hardware.conf
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="TechnoTrend USB IR receiver"
REMOTE_MODULES="lirc_dev lirc_ttusbir"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF=""
REMOTE_LIRCD_ARGS=""
#Chosen IR Transmitter
TRANSMITTER="Custom"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_SOCKET=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""
#Disable kernel support.
#Typically, lirc will disable in-kernel support for ir devices in order to
#handle them internally. Set to false to prevent lirc from disabling this
#in-kernel support.
#DISABLE_KERNEL_SUPPORT="true"
#Enable lircd
#START_LIRCD="true"
START_LIRCD=""
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"
#Try to load appropriate kernel modules
LOAD_MODULES="true"
# Default configuration files for your hardware if any
LIRCMD_CONF=""
#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""
-------------------------------------------------
/etc/lircmd.conf
#UNCONFIGURED
#
# To find out how to get a proper configuration file please read:
#
# /usr/share/doc/lirc/README.Debian
----------------------------------------------------
lspci -v (Section)
03:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 04)
Subsystem: Technotrend Systemtechnik GmbH TT-budget CT2-4500 CI
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at df200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: cx23885
Kernel modules: cx23885
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/1605934/+subscriptions
References
