mythbuntu-bugs team mailing list archive

[Alec Leamas <384011@xxxxxxxxxxxxxxxxxx>]

The important thing hre is the dmesg log. If you are still interested in
this bug, can you provide this. Without it, the will eventually be
closed.

** Changed in: lirc (Ubuntu)
       Status: New => Incomplete

-- 
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to lirc in Ubuntu.
https://bugs.launchpad.net/bugs/384011

Title:
  LIRC didn't work with Home-brew (Igor Cesko's variant) IR receiver on
  Jaunty

Status in lirc package in Ubuntu:
  Incomplete

Bug description:
  Binary package hint: lirc

  I have found an old bug
  (https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/138247), but it
  was already solved, I open a new bug.

  I have an Home-brew (Igor Cesko's variant) connected to COM2. But it didn't work with my device but works with Girder 3.2 & IgorXP.dll.
  And I can't tune lirc to work with it!
  I have install lirc, select "Home-brew (Igor Cesko's variant)(16x50 UART compatible serial port)" in Receivers and None in Transmitters.
  I try to set the option:
  LIRC_SERIAL_CFLAGS=" -DLIRC_SERIAL_SOFTCARRIER -DLIRC_SERIAL_IGOR"
  or not to set.
  LIRC starts succesfully, but irw and mode2 shows none when I press the buttons on IR Transmitter".

  On starting LIRC I see in message.log:
  Jun 5 21:08:52 kit kernel: [ 2393.195311] lirc_dev: IR Remote Control driver registered, major 61
  Jun 5 21:08:53 kit kernel: [ 2393.700880] lirc_serial_igor: auto-detected active low receiver
  Jun 5 21:08:53 kit kernel: [ 2393.700890] lirc_dev: lirc_register_plugin: sample_rate: 0

  # lsmod | grep lirc
  lirc_serial_igor 23336 0
  lirc_dev 22088 1 lirc_serial_igor

  I try this on two computers (one is fresh Jaunty, other - upgraded
  from Intrepid).

  What I do wrong and how to get it works with Jaunty?
  Can I give you additional info about this problem?

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/384011/+subscriptions