mythbuntu-bugs team mailing list archive
-
mythbuntu-bugs team
-
Mailing list archive
-
Message #11052
[Bug 1203483] Re: package lirc 0.9.0-0ubuntu3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 128
I'm on 14.04 LTS and found this as a duplicate of Bug #1497266 reported
by Lin Yu Han on 2015-09-18. I'm wondering why the fix for this bug has
not been tested and made available in more than the zesty (experimental)
repository? Alec had a fix 2 years ago:
Launchpad Janitor (janitor) wrote on 2016-11-01: #4
This bug was fixed in the package lirc - 0.9.4c-4
14.04 is still at 0.9.0-0ubuntu5, which does not install. Everyone on
the Long Term Support release with a need for lirc is vulnerable. I
attempted 'apt-get install inputlirc' naked, but that brings lirc and
this failure too.
I've tried to avoid using lirc, but receive no (EV_KEY) key events in
'ir-keytable -t' output.
root@dor:/home/kirke/DOR# ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event10) with:
Driver mceusb, table rc-rc6-mce
Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Enabled protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC other
Name: Media Center Ed. eHome Infrared
bus: 3, vendor/product: 1784:0011, version: 0x0100
Repeat delay = 500 ms, repeat period = 125 ms
root@dor:/home/kirke/DOR# ir-keytable -t
Testing events. Please, press CTRL-C to abort.
1551891292.693694: event type EV_MSC(0x04): scancode = 0x1f3f
1551891292.693694: event type EV_SYN(0x00).
1551891292.714638: event type EV_MSC(0x04): scancode = 0xb70076
1551891292.714638: event type EV_SYN(0x00).
1551891292.739634: event type EV_MSC(0x04): scancode = 0x1f3f
1551891292.739634: event type EV_SYN(0x00).
1551891292.759642: event type EV_MSC(0x04): scancode = 0xb70076
1551891292.759642: event type EV_SYN(0x00).
1551891292.784694: event type EV_MSC(0x04): scancode = 0x1f3f
1551891292.784694: event type EV_SYN(0x00).
1551891292.884699: event type EV_MSC(0x04): scancode = 0xb70076
1551891292.884699: event type EV_SYN(0x00).
Above is what I see after pressing the OK (Select) button.
I have the same remote and IR receiver working fine in the living room with lirc untouched under a 2014 install. I want to transition both machines to 18.04, but have no confidence I'll
have a working remote control for mythtv.
Apparently, I've removed and purged lirc in a way that is confusing
packaging software's post install script.
--
You received this bug notification because you are a member of Mythbuntu
Bug Team, which is subscribed to lirc in Ubuntu.
https://bugs.launchpad.net/bugs/1203483
Title:
package lirc 0.9.0-0ubuntu3 failed to install/upgrade: subprocess
installed post-installation script returned error exit status 128
Status in lirc package in Ubuntu:
Fix Released
Status in lirc source package in Xenial:
Triaged
Status in lirc source package in Yakkety:
Triaged
Bug description:
Thanks a lot....
Alvaro Osuna
Call me Tony
ProblemType: Package
DistroRelease: Ubuntu 13.04
Package: lirc 0.9.0-0ubuntu3
ProcVersionSignature: Ubuntu 3.8.0-26.38-generic 3.8.13.2
Uname: Linux 3.8.0-26-generic i686
NonfreeKernelModules: nvidia
ApportVersion: 2.9.2-0ubuntu8.1
Architecture: i386
Date: Sun Jul 21 19:31:42 2013
ErrorMessage: subprocess installed post-installation script returned error exit status 128
InstallationDate: Installed on 2013-07-21 (0 days ago)
InstallationMedia: This
MarkForUpload: True
SourcePackage: lirc
Title: package lirc 0.9.0-0ubuntu3 failed to install/upgrade: subprocess installed post-installation script returned error exit status 128
UpgradeStatus: No upgrade log present (probably fresh install)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/lirc/+bug/1203483/+subscriptions