| Thread Previous • Date Previous • Date Next • Thread Next |
Hi, Actually I can't find them from /etc/smcroute.conf (should be default location?). Even in the host machine where i can reinstall it without errors i can't see any conf files. On this machine I didn't run those scripts. gw@gw-VirtualBox:/etc$ whereis smcroute.conf smcroute: /usr/sbin/smcroute /etc/smcroute /usr/share/man/man8/smcroute.8.gz Enclosed edited scripts Br. Jussi On 5 February 2014 14:51, Fabrice HOBAYA < fabrice.hobaya@xxxxxxxxxxxxxxxxxxxx> wrote: > Hi, > > Could you send me your smcroute conf files. > > Regarding the warning it does not matter. > > BR, > Fabrice. > > Le 05/02/2014 13:47, Jussi Isokangas a écrit : > > Thank you! > You have huge mount of ST! > After running gonf files I got conflicts on smcroute and can't use it > even purge and re-install. > "Segmentation fault (core dumped)" > and after re install "dpkg erroor: processing smcroute (--configure) > > I'm not sure if I have to use names in script included in daemon.conf : > GW daemon.conf > emu_ipv4 = 192.168.18.42/24 > lan_iface = eth1 > lan_ipv4 = 192.168.42.1/24 > > ST: daemon.conf > Something else > > > > Is it matter of the warning "plugin AAL5/ATM may be missing" ? > RG Jussi > > > > > > > > > > > On 4 February 2014 18:14, Fabrice HOBAYA < > fabrice.hobaya@xxxxxxxxxxxxxxxxxxxx> wrote: > >> Hi, >> >> Regarding IPV4 multicast routing, we have tested the platform with >> smcroute (http://www.cschill.de/smcroute/) which is not an OpenSAND tool. >> >> Attached to this mail, small scripts that gives an example of smcroute >> configuration. >> This configuration set: >> - The ST1 as a multicast router and listener for the multicast group >> 239.1.1.1 >> - The GW as a multicast router and listener for the multicast group >> 239.1.1.1 >> - The ST3 as a multicast listener for the multicast group 239.1.1.1 >> >> On this files you have to check if interface names and subnetwork >> addresses match your platform. >> >> Trick: regarding the multicast ping, don't forget to use the -t option to >> modify the ttl which is set to 1 by default for multicast addresses. >> >> BR, >> Fabrice. >> >> Le 04/02/2014 16:51, Julien BERNARD a écrit : >> >> Hi Juss, >>> >>>> >>>> I have trivial question considering send multicast. I expect I' ll need >>>> install gse-encap plugin to working with Multicast. >>>> >>> You don't need to install GSE for multicast, this should work with ATM >>> and MPEG encapsulations. >>> Fabrice should sent you some advices for multicast soon. >>> >>> I have tested Multicast by Iperf-tool without success. Anyway ping >>>> works normally. I can't install that plugin trough installation manual I >>>> got error: >>>> >>>> /checking whether gcc needs -traditional... no >>>> checking for X... no >>>> checking for $CXX... no >>>> checking for -c... no >>>> checking for $CXXFLAGS... no >>>> checking for $CPPFLAGS... no >>>> checking for conftest.$ac_ext... no >>>> checking for >&5... no >>>> checking for pkg-config... /usr/bin/pkg-config >>>> checking pkg-config is at least version 0.9.0... yes >>>> checking for OPENSAND_GSE... no >>>> checking for OPENSAND_GSE... configure: error: Package requirements >>>> (gse = 2.0.0) were not met: >>>> >>>> No package 'gse' found >>>> >>>> Consider adjusting the PKG_CONFIG_PATH environment variable if you >>>> installed software in a non-standard prefix. >>>> >>>> Alternatively, you may set the environment variables OPENSAND_GSE_CFLAGS >>>> and OPENSAND_GSE_LIBS to avoid the need to call pkg-config. >>>> See the pkg-config man page for more details. >>>> / >>>> I have tried many tricks to set environment variables without success. >>>> >>>> >>>> I think you did not installed the GSE package. >>> To avoid the compilation phase, you can install >>> libopensand-gse-encap-plugin on daemons and >>> libopensand-gse-encap-plugin-manager on manager. It is available on our >>> repository and on launchpad. If you use the package downloaded on launchpad >>> or if you still want to compile the plugin, install the libgse package >>> before. It is available on the libgse launchpad page. >>> >>> Regards, >>> >>> >> -- >> Fabrice HOBAYA >> PhD - Réseaux, Télécommunications, Systèmes et Architectures >> Ingénieur d'études Viveris Technologies >> +335 61 00 31 84 >> fabrice.hobaya@xxxxxxxxxxxxxxxxxxxx >> >> >> -- >> Mailing list: https://launchpad.net/~opensand >> Post to : opensand@xxxxxxxxxxxxxxxxxxx >> Unsubscribe : https://launchpad.net/~opensand >> More help : https://help.launchpad.net/ListHelp >> >> > > -- > Fabrice HOBAYA > PhD - Réseaux, Télécommunications, Systèmes et Architectures > Ingénieur d'études Viveris Technologies > +335 61 00 31 84fabrice.hobaya@xxxxxxxxxxxxxxxxxxxx > >
Attachment:
smcrouteGW_conf.sh
Description: Bourne shell script
Attachment:
smcrouteST1_conf.sh
Description: Bourne shell script
| Thread Previous • Date Previous • Date Next • Thread Next |
