HI,
First you have to make sure the network between your control node's
br100 and your compute node's br100 are connected.
and then can you show the output on control node:
ps -ef | grep dnsmasq
brctl show
ifconfig
2. can you login to your vm by vnc to see the eth0 configuration and
then try to run udhcpc?
Thanks
-----openstack-bounces+gongysh=cn.ibm.com@xxxxxxxxxxxxxxxxxxx wrote: -----
To: "openstack@xxxxxxxxxxxxxxxxxxx" <openstack@xxxxxxxxxxxxxxxxxxx>
From: Michaël Van de Borne <michael.vandeborne@xxxxxxxx>
Sent by: openstack-bounces+gongysh=cn.ibm.com@xxxxxxxxxxxxxxxxxxx
Date: 05/10/2012 09:03PM
Subject: [Openstack] Accessing VMs in Flat DHCP mode with multiple
host
Hello,
I'm running into troubles accessing my instances.
I have 3 nodes:
1. proxmox that virtualizes in KVM my controller node
1.1 the controller node (10.10.200.50) runs keystone,
nova-api, network, scheduler, vncproxy and volumes but NOT compute
as it is already a VM
2. glance in a physical node
3. compute in a physical node
my nova.conf network config is:
--dhcpbridge_flagfile=/etc/nova/nova.conf
--dhcpbridge=/usr/bin/nova-dhcpbridge
--routing_source_ip=10.10.200.50
--libvirt_use_virtio_for_bridges=true
--network_manager=nova.network.manager.FlatDHCPManager
--public_interface=eth0
--flat_interface=eth1
--flat_network_bridge=br100
--fixed_range=192.168.200.0/24
--floating_range=10.10.200.0/24
--network_size=256
--flat_network_dhcp_start=192.168.200.5
--flat_injected=False
--force_dhcp_release
--network_host=10.10.200.50
I even explicitly allows icmp and tcp port 22 traffic like this:
euca-authorize -P icmp -t -1:-1 default
euca-authorize -P tcp -p 22 default
before setting these rules, I was getting 'Operation not
permitted' when pinging the VM from the compute node. After
setting these, I just get no output at all (not even 'Destination
Host Unreachable')
The network was created like this:
nova-manage network create private
--fixed_range_v4=192.168.200.0/24 --bridge=br100
--bridge_interface=eth1 --num_networks=1 --network_size=256
However I cannot ping or ssh my instances once they're active. I
have already set up such an Essex environment but the controller
node was physical. Morevover, every examples in the doc presents a
controller node that runs nova-compute.
So I'm wondering if either:
- having the controller in a VM
- or not running compute on the controller
would prevent things to work properly.
What can I check? iptables? is dnsmasq unable to give the VM an
address?
I'm running out of ideas. Any suggestion would be highly appreciated.
Thank you,
michaël
--
Michaël Van de Borne
R&D Engineer, SOA team, CETIC
Phone: +32 (0)71 49 07 45 Mobile: +32 (0)472 69 57 16, Skype:
mikemowgli
www.cetic.be, rue des Frères Wright, 29/3, B-6041 Charleroi
_______________________________________________
Mailing list: https://launchpad.net/~openstack
<https://launchpad.net/%7Eopenstack>
Post to : openstack@xxxxxxxxxxxxxxxxxxx
Unsubscribe : https://launchpad.net/~openstack
<https://launchpad.net/%7Eopenstack>
More help : https://help.launchpad.net/ListHelp
