← Back to team overview

openstack team mailing list archive

Re: devstack installation failing

 

Thanks Dolph for explaining the full command. Here is my output:

keystone --os_username=admin --os_password=nova --os_tenant_name=admin --os_auth_url=http://10.0.3.15:5000/v2.0/ tenant-list

No handlers could be found for logger "keystoneclient.client"
Invalid tenant (HTTP 401)

where I used:
os_username=admin (default username that I previously used to access the dashboard)
os_password=nova(password that I set during devstack installation and can be seen in localrc, that I previously used to access dashboard)
os_tenant_name=admin(same as project name ? This is one of the two default projects that I used to launch instances for)

I hope my credentials are correct (as explained above) but still I see Invalid tenant as command's output. Any ideas?
Also, it would be great if you could correct my understanding of the following terms: os_user=cloud user that provides IaaS to the tenants (and tenant is also know as project in os jargon?)

Thanks,
Salman
 

Date: Thu, 24 May 2012 10:18:29 -0500
Subject: Re: [Openstack] devstack installation failing
From: dolph.mathews@xxxxxxxxx
To: salmanmk@xxxxxxxx
CC: mandar.vaze@xxxxxxxxxxx; openstack@xxxxxxxxxxxxxxxxxxx

keystoneclient is looking for enough arguments for it to either fully authenticate or bypass authentication.
To fully authenticate:keystone --os_username=admin --os_password=secret --os_tenant_name=project-x --os_auth_url=http://keystone:5000/v2.0/ tenant-list

To bypass authentication (i.e. you already have a token & endpoint):keystone --token=94eabe5d --endpoint=http://keystone:35357/v2.0/ tenant-list

As shown in the error messages you're seeing, you can also set all these variables in your environment so you don't have to specify them for each keystoneclient command.

-Dolph
On Thu, May 24, 2012 at 9:17 AM, Salman Malik <salmanmk@xxxxxxxx> wrote:





Thanks guys. Here is the output of the curl command:

{"error": {"message": "Invalid tenant", "code": 401, "title": "Not Authorized"}}


Seems like there is no such tenant in keystone database. I tried doing keystone tenant-list but it keeps on asking for one extra argument each time (i.e after keystone tenant-list, I tried "keystone --os_username admin tenant-list" and "keystone --os_username --os_password tenant-list" ). Anyway, what could be th cause of keystone's database problems?




Date: Thu, 24 May 2012 00:40:19 -0500
Subject: Re: [Openstack] devstack installation failing
From: dolph.mathews@xxxxxxxxx

To: Mandar.Vaze@xxxxxxxxxxx
CC: salmanmk@xxxxxxxx; openstack@xxxxxxxxxxxxxxxxxxx


The output to the curl command below should definitely point you in the right direction -- devstack is expecting keystone to return an authentication response there, but it's getting something else instead. Feel free to paste the results to the list.


-Dolph

On Wed, May 23, 2012 at 11:47 PM, Vaze, Mandar <Mandar.Vaze@xxxxxxxxxxx> wrote:









Last time when I ran into this error, I had updated (git pull) only nova, but forgot to update keystone.


Once I updated (git pull) all the other projects, including keystone, the error went away.

 
Few things you can use for troubleshooting :
 
1.      
Run this command from terminal – See if the outpur gives any clue : “curl
 -s -d '{"auth":{"passwordCredentials": {"username": "admin", "password": "nova"}, "tenantName": "admin"}}' -H 'Content-type: application/json'
http://10.0.3.15:5000/v2.0/tokens”;



2.      
Check the keystone database, see if user admin and tenant admin are created OK



 
-Mandar
 


From: openstack-bounces+mandar.vaze=nttdata.com@xxxxxxxxxxxxxxxxxxx [mailto:openstack-bounces+mandar.vaze=nttdata.com@xxxxxxxxxxxxxxxxxxx]
On Behalf Of Salman Malik

Sent: Thursday, May 24, 2012 9:48 AM

To: openstack@xxxxxxxxxxxxxxxxxxx

Subject: [Openstack] devstack installation failing


 


Hi All,



While installing devstack, installation is failing with the error :

++ python -c 'import sys; import json; tok = json.loads(sys.stdin.read()); print tok['\''access'\'']['\''token'\'']['\''id'\''];'

++ curl -s -d '{"auth":{"passwordCredentials": {"username": "admin", "password": "nova"}, "tenantName": "admin"}}' -H 'Content-type: application/json'
http://10.0.3.15:5000/v2.0/tokens

Traceback (most recent call last):

  File "<string>", line 1, in <module>

KeyError: 'access'



With some searching I know this has something to do with the keystone but I have no clue how to resolve this one.

Thanks for your help.



Salman




______________________________________________________________________

Disclaimer:This email and any attachments are sent in strictest confidence for the sole use of the addressee and may contain legally privileged, confidential, and proprietary data.  If you are not the intended recipient, please advise the sender by replying promptly to this email and then delete and destroy this email and any attachments without any further use, copying or forwarding






_______________________________________________

Mailing list: https://launchpad.net/~openstack

Post to     : openstack@xxxxxxxxxxxxxxxxxxx

Unsubscribe : https://launchpad.net/~openstack

More help   : https://help.launchpad.net/ListHelp



 		 	   		  

 		 	   		  

References