openstack team mailing list archive

["??????" <zhangjl@xxxxxxxxxxx>]

Dear Doug,
    Thanks for reply.
    While ,where to find the patch posted  John ? If it`s prossable,please point it out,Thanks.
    And it`s my pleasure to be the first one to receive the message about you fix this problems.

    Good luck !
------------------
 Best Regards
  
 ZhangJialong
 



 
 
 
------------------ Original ------------------
From:  "Doug Hellmann"<doug.hellmann@xxxxxxxxxxxxx>;
Date:  Mon, Jul 16, 2012 08:55 PM
To:  "??????"<zhangjl@xxxxxxxxxxx>; 
Cc:  "Julien Danjou"<julien@xxxxxxxxxxx>; "openstack"<openstack@xxxxxxxxxxxxxxxxxxx>; 
Subject:  Re: [Openstack] Questions about ceilometer

 

 
 On Sat, Jul 14, 2012 at 10:02 PM, ?????? <zhangjl@xxxxxxxxxxx> wrote:
  Hi,all.
    Sorry for late reply.
    Until now, I not test folsom. So, I`am not sure how it work in folsom .
    The follow is my qpid config file:
     http://pastebin.com/sBXm6k7z  
     And Doug writed set driver to "nova.openstack.common.notifier.rabbit_notifier",
    while , I cannot found this class or modules in exsse.
   
 
 The notifier classes moved in Folsom, so that's the setting you would need if you were working with Folsom.
   
I'm traveling this week, so I won't be able to set up a test environment with Essex or qpid until next week some time.
 
  
 
 Based on rereading the configuration files you posted, I do suspect that this is a problem with the code, rather than your configuration. You might want to try the patch John posted above. I don't think that's the right long-term solution, but if it gets you past this situation we can find a better solution later.
  
 
 Doug
  
  
     ------------------
   Best Regards
  
 ZhangJialong
 
 
   
      
  
  
  
   ------------------ Original ------------------
   From:  "Doug Hellmann"<doug.hellmann@xxxxxxxxxxxxx>;
   Date:  Sat, Jul 14, 2012 00:17 AM
  To:  "??????"<zhangjl@xxxxxxxxxxx>;   
  Cc:  "Julien Danjou"<julien@xxxxxxxxxxx>; "openstack"<openstack@xxxxxxxxxxxxxxxxxxx>;   
   Subject:  Re: [Openstack] Questions about ceilometer
 
 
  
 
 
  On Fri, Jul 13, 2012 at 11:36 AM, ?????? <zhangjl@xxxxxxxxxxx> wrote:
  
   Dear Doug,
    I`m use Qpid instead of Rabbit . 
    Did it cause the error ?
   
 
 
  Qpid should work, but I haven't been testing with that so you might have found a bug.
  
 
 There are (at least) two differences between your setup and what I normally use: Essex and qpid. Have you tried running against a folsom install? That would at least tell us if the qpid configuration is correct or if the problem is related to Essex.
  
 
 Doug
  
 
     In addition,my nova.conf,mongodb.conf and ceilometer-collector.conf are here: 
       http://pastebin.com/sW5d8eRv  
      http://pastebin.com/D5GMkLsb  
      http://pastebin.com/u5vH22Lh  
    Were there some errors in my config files?
 
    Waiting your reply. Thanks.
    ------------------
   Best Regards
  
 ZhangJialong
 
 
   
      
  
  
  
 
   ------------------ Original ------------------
   From:  "Doug Hellmann"<doug.hellmann@xxxxxxxxxxxxx>;
   Date:  Fri, Jul 13, 2012 11:28 PM
 
   To:  "??????"<zhangjl@xxxxxxxxxxx>; "Julien Danjou"<julien@xxxxxxxxxxx>;   
 
  Cc:  "openstack"<openstack@xxxxxxxxxxxxxxxxxxx>;   
   Subject:  Re: [Openstack] Questions about ceilometer
 
 
    
 
 
 On Fri, Jul 13, 2012 at 10:04 AM, Doug Hellmann <doug.hellmann@xxxxxxxxxxxxx> wrote:
   
 
     On Thu, Jul 12, 2012 at 9:42 PM, ?????? <zhangjl@xxxxxxxxxxx> wrote:
  
 
     Dear all,
 
    As the project named ceilometer appeared,I paid close attention to it.
    According to the docs of ceilometer,I deploied it in openstack exsse environment.
     While,I cannot start the ceilometer collector and agent.
    
    The follows are my operations.
    
    1.Install openstack nova ,mongodb and ceilometer.
    2.configurate nova ,mongodb and ceilometer
     
    The /etc/nova/nova.conf file is here:
     http://pastebin.com/sW5d8eRv  
    
     Here is the /etc/ceilometer-collector.conf file is here:
     http://pastebin.com/u5vH22Lh  
     
    And the /etc/mongodb.conf is here:
     http://pastebin.com/D5GMkLsb  
    
     3.Start openstack nova ,mongodb
     
    4.Then I start the ceilometer-collector
    /usr/bin/ceilometer-collector start
    While,some errors occurred:
    
    2012-07-11 05:25:35 INFO ceilometer.storage [-] Loaded mongodb storage engine EntryPoint.parse('mongodb = ceilometer.storage.impl_mongodb:MongoDBStorage')
     2012-07-11 05:25:35 INFO ceilometer.storage [-] Loaded mongodb storage engine EntryPoint.parse('mongodb = ceilometer.storage.impl_mongodb:MongoDBStorage')
    2012-07-11 05:25:35 INFO ceilometer.storage.impl_mongodb [-] connecting to MongoDB on localhost:27017
     2012-07-11 05:25:35 INFO ceilometer.collector.dispatcher [-] attempting to load notification handler for ceilometer.collector.compute:instance
    2012-07-11 05:25:35 INFO ceilometer.collector.dispatcher [-] subscribing instance handler to compute.instance.create.end events
     2012-07-11 05:25:35 INFO ceilometer.collector.dispatcher [-] subscribing instance handler to compute.instance.exists events
    2012-07-11 05:25:35 INFO ceilometer.collector.dispatcher [-] subscribing instance handler to compute.instance.delete.start events
     Traceback (most recent call last):
      File "/usr/lib/python2.6/site-packages/eventlet/hubs/poll.py", line 97, in wait
        readers.get(fileno, noop).cb(fileno)
      File "/usr/lib/python2.6/site-packages/eventlet/greenthread.py", line 192, in main
         result = function(*args, **kwargs)
      File "/usr/lib/python2.6/site-packages/nova/service.py", line 101, in run_server
        server.start()
      File "/usr/lib/python2.6/site-packages/nova/service.py", line 162, in start
         self.manager.init_host()
      File "/usr/lib/python2.6/site-packages/ceilometer-0-py2.6.egg/ceilometer/collector/manager.py", line 69, in init_host
 
 
        topic='%s.info' % flags.FLAGS.notification_topics[0], 
       File "/usr/lib/python2.6/site-packages/nova/openstack/common/cfg.py", line 867, in __getattr__
        return self._substitute(self._get(name))
      File "/usr/lib/python2.6/site-packages/nova/openstack/common/cfg.py", line 1070, in _get
         info = self._get_opt_info(name, group)
      File "/usr/lib/python2.6/site-packages/nova/openstack/common/cfg.py", line 1161, in _get_opt_info
        raise NoSuchOptError(opt_name, group)
    NoSuchOptError: no such option: notification_topics
     Removing descriptor: 12 
 
 
      
    If anyone can help me ? Waiting your reply. Thanks !
 
 
   
 
 
 
 
  It looks like we have a problem with the way we are loading nova's settings under Essex. I know some of the flags and cfg code was moved around and changed between Essex and Folsom as part of it moved into openstack-common. Julien, you're more familiar with Essex than I am, do you have any ideas about this problem?
 
 
    
 
 I think I left out a configuration step in the instructions at http://ceilometer.readthedocs.org/en/latest/install.html.
  
 
 Did you configure your system to use the Rabbit notifier?
  
 
 Doug
  
 
    
 
 Doug
  
     
     ------------------
   Best Regards
  
 ZhangJialong
 
 
   
      
  
 
 
 
_______________________________________________
 Mailing list: https://launchpad.net/~openstack 
 
  Post to     : openstack@xxxxxxxxxxxxxxxxxxx 
 Unsubscribe : https://launchpad.net/~openstack 
 More help   : https://help.launchpad.net/ListHelp