← Back to team overview

openstack team mailing list archive

Re: nova-network and corosync

 

Il giorno 19/lug/2012, alle ore 00:52, Steven Dake ha scritto:

> On 07/18/2012 06:51 AM, Alessandro Tagliapietra wrote:
>> Hi Steve,
>> 
>> the problem is not that it's not listening on the correct interface, as lsof shows
>> 
>> corosync 1485 root    9u  IPv4              14890      0t0       UDP 226.94.1.1:5405 
>> corosync 1485 root   10u  IPv4              14891      0t0       UDP server1:5404 
>> corosync 1485 root   11u  IPv4              14892      0t0       UDP server1:5405
>> 
>> where server1 is 10.8.0.1, which is correct because it's the eth1 address.
>> 
>> The problem is that for some reason, the packets it sends to eth1 has as source ip the ip of eth0, which is the public internet connected interface, so like:
>> 
>> 15:44:34.135411 IP 5.9.x.x.5404 > 226.94.1.1.5405: UDP, length 82
>> 15:44:34.238762 IP 5.9.x.x.5404 > 226.94.1.1.5405: UDP, length 82
>> 
>> which is wrong. my ip r is this:
>> 
>> default via 5.9.x.x dev eth0  metric 100 
>> 5.9.x.x/27 via 5.9.x.x dev eth0 
>> 5.9.x.x/27 dev eth0  proto kernel  scope link  src 5.9.x.x 
>> 10.0.0.0/16 dev eth2  proto kernel  scope link  src 10.0.0.1 
>> 10.8.0.0/16 dev eth1  proto kernel  scope link  src 10.8.0.1 
>> 192.168.122.0/24 dev virbr0  proto kernel  scope link  src 192.168.122.1
>> 
>> As you can see packets to eth1 should have 10.8.0.1 as source, not eth0 ip.
>> 
> 
> Odd - Are you using udpu mode?  Which version?  Can you subscribe to the
> corosync list and we can follow-up there?
> 

When starting this discussion i was using ubuntu 12.04 repositories so 1.4.2, today i've installed 2.0.1, i've added corosync mailing list in cc. I have to specify that this problem happens only when i've installed nova network on both nodes (i'm using multi-host).
Let me paste some configs:

nova.conf: http://pastie.org/private/c5tcutro6tp0s1te5yq (i've tried with flat_interface eth1 and eth2)
ifconfig: http://pastie.org/private/7li8gwodr0ulgbafsi4edw
corosync.conf: http://pastie.org/private/cjrtqx9bspgmff7rlye6ew (tried with 10.8.0.0 also as bindnetaddr)
ip r: http://pastie.org/private/ckqhy0vqoiwzewuj17v7g
iptables-save: http://pastie.org/private/yvypgi5ovs2rtcingrq5iw (all generated by nova-network)

If you need any other things just ask.

Btw, i'm going to try with udpu now.

Regards

> http://lists.corosync.org/mailman/listinfo/discuss
> 
> thanks
> -steve
> 
>> Regards
>> 
>> Il giorno 18/lug/2012, alle ore 15:18, Steven Dake ha scritto:
>> 
>>> On 07/18/2012 03:50 AM, Alessandro Tagliapietra wrote:
>>>> Hello,
>>>> 
>>>> i've 2 machines, running ubuntu 12.04, i've installed corosync +
>>>> pacemaker and it was working fine.
>>>> 
>>>> Corosync is using eth1 with 10.8.0.1 and 10.8.0.2 as ip of the hosts,
>>>> i've got keystone, glance, nova api-cert-scheduler, mysql, rabbitmq
>>>> working in HA with pacemaker.
>>>> 
>>>> The problem comes after installing nova-network and nova-compute, i've
>>>> used this nova.conf:
>>>> 
>>>> http://pastie.org/private/ddwva8kvaypqrxk7rifvba
>>>> 
>>>> and after nova-compute started and hosts rebooted i can't get to work
>>>> corosync,
>>>> 
>>>> the problem seems that when hosts send packets in eth1 to multicast
>>>> address, the source ip is the public one, not the 10.8.0.x one. After
>>>> disabling nova-network on boot everything works.
>>>> 
>>>> I've also tried to create a virtual eth2 device and set flat_interface
>>>> to eth2, but it seems that still nova-network break the configuration as
>>>> corosync still uses public ip for private lan.
>>>> 
>>>> Any idea?
>>>> 
>>> 
>>> Corosync goes to great pains to route packets across the interface
>>> identified in the corosync.conf file.  If you are using a subnet
>>> definition ie:
>>> bindnetaddr: 10.8.0.0, it may be that the interface's netmask is causing
>>> a rebind to the new interface when nova network starts.
>>> 
>>> One way to force binding to a specific interface when your network is
>>> not configured in a typical fashion is to identify the bindnetaddr exactly:
>>> 
>>> ie: bindnetaddr: 10.8.0.1
>>> 
>>> Regards
>>> -steve
>>> 
>>>> Best Regards
>>>> 
>>>> -- 
>>>> Alessandro Tagliapietra | VISup srl
>>>> piazza 4 novembre 7
>>>> 20124 Milano
>>>> 
>>>> http://www.visup.it
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Mailing list: https://launchpad.net/~openstack
>>>> Post to     : openstack@xxxxxxxxxxxxxxxxxxx
>>>> Unsubscribe : https://launchpad.net/~openstack
>>>> More help   : https://help.launchpad.net/ListHelp
>>>> 
>>> 
>>> 
>> 
> 
> 

-- 
Alessandro Tagliapietra | VISup srl
piazza 4 novembre 7
20124 Milano

http://www.visup.it

Follow ups

References