openstack team mailing list archive

[heckj <heckj@xxxxxxx>]

Can you invoke the keystone commands with --token and --endpoint? That's the same thing as what you're trying to do with curl, but using the CLI to do the hard work of making sure you get the header's all nailed down correctly.

Some good ones to try are:
(using your example "token" and "endpoint" from below - modify if they don't match your config)

	keystone --token ahmedadmintoken --endpoint http://10.176.20.158:35357/v2.0 tenant-list
	keystone --token ahmedadmintoken --endpoint http://10.176.20.158:35357/v2.0 user-list
	keystone --token ahmedadmintoken --endpoint http://10.176.20.158:35357/v2.0 service-list
	keystone --token ahmedadmintoken --endpoint http://10.176.20.158:35357/v2.0 role-list

All of these should report back *without* errors, even if you haven't bootstrapped Keystone to include any services, tenants, users, or roles.

You can also add "--debug" (as in keystone --debug --token ahmedadmintoken --endpoint http://10.176.20.158:35357/v2.0 user-list) to see the underlying HTTP protocol going back and forth and what's getting sent to Keystone.

-joe

On Oct 1, 2012, at 5:30 PM, Ahmed Al-Mehdi <ahmed@xxxxxxxxxx> wrote:
> Actually, the curl command with the "X_Auth_Token" is my weak attempt to try to find a solution.  I am actually issuing the following command (per recommendation from the OpenStack document - "Install and Deploy Manual – Red Hat Ubuntu"):
> 
> root@bodega:~# curl -d '{"auth": {"tenantName": "adminTenant", "passwordCredentials": {"username": "adminUser", "password": "secretword"}}}' -H "Content-type: application/json" -H "X_Auth_Token: ahmedadmintoken" http://10.176.20.158:35357/v2.0/tokens | python -mjson.tool
>   % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
>                                  Dload  Upload   Total   Spent    Left  Speed
> 100   231    0   116  100   115  12927  12816 --:--:-- --:--:-- --:--:-- 14500
> {
>     "error": {
>         "code": 401, 
>         "message": "The request you have made requires authentication.", 
>         "title": "Not Authorized"
>     }
> }
> 
> Regards,
> Ahmed.
> 
> 
> From: heckj <heckj@xxxxxxx>
> Date: Monday, October 1, 2012 5:23 PM
> To: Ahmed Al-Mehdi <ahmed@xxxxxxxxxx>
> Cc: "openstack@xxxxxxxxxxxxxxxxxxx" <openstack@xxxxxxxxxxxxxxxxxxx>
> Subject: Re: [Openstack] Enabling logging in keystone.
> 
> Ahmed - 
> 
> The header that's supposed to have the token within it is labelled "X-Auth-Token', not "X_Auth_Token".  Unless you're really comfortable with the protocol, I'd recommend using the keystone CLI from the python-keystoneclient to do your verifying, using it's debugging (which is to show you the curl output that you did below).
> 
> -joe 
> 
> On Oct 1, 2012, at 5:12 PM, Ahmed Al-Mehdi <ahmed@xxxxxxxxxx> wrote:
>> Hello,
>> 
>> I am trying to verify the installation of keystone.  When I try to run some "curl" commands, I get the following error message:
>> 
>> root@bodega:~/ahmed/keystone-init# curl -d '{"auth": {"tenantName": "adminTenant", "passwordCredentials": {"username": "adminUser", "password": "secretword"}}}' -H "Content-type: application/json" -H "X_Auth_Token: ahmedadmintoken" http://10.176.20.158:35357/v2.0/tokens | python -mjson.tool
>>   % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
>>                                  Dload  Upload   Total   Spent    Left  Speed
>> 100   231    0   116  100   115  15205  15074 --:--:-- --:--:-- --:--:-- 16571
>> {
>>     "error": {
>>         "code": 401, 
>>         "message": "The request you have made requires authentication.", 
>>         "title": "Not Authorized"
>>     }
>> }
>> 
>> 
>> I don't see any message in the /var/log/keystone/logging.conf file.   I can pass "-debug" option to keystone to enable debugging, but I am not sure how to do that from curl.  Following is content of /etc/keystone/logging.conf file:
>> 
>> root@bodega:~# cat /etc/keystone/logging.conf 
>> [loggers]
>> keys=root
>> 
>> [formatters]
>> keys=normal,normal_with_name,debug
>> 
>> [handlers]
>> keys=production,file,devel
>> 
>> [logger_root]
>> level=WARNING
>> handlers=file
>> 
>> [handler_production]
>> class=handlers.SysLogHandler
>> level=ERROR
>> formatter=normal_with_name
>> args=(('localhost', handlers.SYSLOG_UDP_PORT), handlers.SysLogHandler.LOG_USER)
>> 
>> [handler_file]
>> class=FileHandler
>> level=DEBUG
>> formatter=normal_with_name
>> args=('/var/log/keystone/keystone.log', 'a')
>> 
>> [handler_devel]
>> class=StreamHandler
>> level=NOTSET
>> formatter=debug
>> args=(sys.stdout,)
>> 
>> [formatter_normal]
>> format=%(asctime)s %(levelname)s %(message)s
>> 
>> [formatter_normal_with_name]
>> format=(%(name)s): %(asctime)s %(levelname)s %(message)s
>> 
>> [formatter_debug]
>> format=(%(name)s): %(asctime)s %(levelname)s %(module)s %(funcName)s %(message)s
>> root@bodega:~# 
>> 
>> Any help would be greatly appreciated.
>> 
>> Regards,
>> Ahmed.
>> 
>> 
>> 
>> _______________________________________________
>> Mailing list: https://launchpad.net/~openstack
>> Post to     : openstack@xxxxxxxxxxxxxxxxxxx
>> Unsubscribe : https://launchpad.net/~openstack
>> More help   : https://help.launchpad.net/ListHelp
>