← Back to team overview

openstack team mailing list archive

Re: Enabling logging in keystone.

 

Hi Joe,

I have put the conf file (renamed to ahmed_keystone.conf)  into gist.

git://gist.github.com/3821846.git 

Please let me know if you have any issues accessing the file.

Thank you very much for helping me out.  I have a feeling the issue might be in the python script to populate keystone. When I previously input the data manually, I got keystone configured properly.

Regards,
Ahmed.


________________________________________
From: heckj [heckj@xxxxxxx]
Sent: Tuesday, October 02, 2012 10:56 AM
To: Ahmed Al-Mehdi
Cc: openstack@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Openstack] Enabling logging in keystone.

Ahmed - can you put your keystone.conf into a paste or gist and share it with me? I'd be happy to help you debug this.

I'm assuming you're running keystone on the system with the IP address 10.0.2.15, correct?

-joe

On Oct 2, 2012, at 10:45 AM, Ahmed Al-Mehdi <ahmed@xxxxxxxxxx> wrote:

> Hi Joe,
>
> I noticed I did not put the port number in the URL, now I am getting a more meaningful error:
>
> #> keystone --token 012345SECRET99TOKEN01234 --endpoint http://10.0.2.15:35357/v2.0  tenant-list
> No handlers could be found for logger "keystoneclient.client"
> Unable to authorize user
>
> Regards,
> Ahmed.
>
> ________________________________________
> From: openstack-bounces+ahmed=coraid.com@xxxxxxxxxxxxxxxxxxx [openstack-bounces+ahmed=coraid.com@xxxxxxxxxxxxxxxxxxx] On Behalf Of Ahmed Al-Mehdi [ahmed@xxxxxxxxxx]
> Sent: Tuesday, October 02, 2012 10:30 AM
> To: heckj
> Cc: openstack@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [Openstack] Enabling logging in keystone.
>
> Hi Joe,
>
> Unfortunately before I read your response I re-installed my Ubuntu server.  I repeated the same steps mentioned in the OpenStack document "Deploy and Install OpenStack - RedHat Ubuntu" and also used the script mentioned in it  (https://github.com/nimbis/keystone-init/blob/master/keystone-init.py) to populate keystone.  I reboot the server prior to running your suggested command and now running into a different issue, which I feel maybe due to not starting some service.  Btw, my host OS is Ubuntu 12.04 (32 bit) running inVirtualBox.
>
> Currently I am getting the following error:
>
> #> keystone --token 012345SECRET99TOKEN01234 --endpoint http://10.0.2.15/v2.0 tenant-list
> No handlers could be found for logger "keystoneclient.client"
> Unable to communicate with identity service: [Errno 111] Connection refused. (HTTP 400)
>
> How can I address the "logger" error.  I don't see any output sent to /var/log/keystone/keystone.log.
>
> I checked mysql and keystone is running:
>
> #> service keystone status
> keystone start/running, process 741
> #> ps aux | grep key
> keystone   741  0.0  0.0   3028  1184 ?        Ss   09:41   0:00 su -s /bin/sh -c exec keystone-all keystone
> keystone   760  0.1  1.0  30872 21696 ?        S    09:41   0:01 /usr/bin/python /usr/bin/keystone-all
> root      1726  0.0  0.0   4388   828 tty1     S+   09:56   0:00 grep --color=auto key
>
> Thank you,
> Ahmed.
>
>
> ________________________________________
> From: heckj [heckj@xxxxxxx]
> Sent: Monday, October 01, 2012 5:47 PM
> To: Ahmed Al-Mehdi
> Cc: openstack@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [Openstack] Enabling logging in keystone.
>
> Can you invoke the keystone commands with --token and --endpoint? That's the same thing as what you're trying to do with curl, but using the CLI to do the hard work of making sure you get the header's all nailed down correctly.
>
> Some good ones to try are:
> (using your example "token" and "endpoint" from below - modify if they don't match your config)
>
>        keystone --token ahmedadmintoken --endpoint http://10.176.20.158:35357/v2.0 tenant-list
>        keystone --token ahmedadmintoken --endpoint http://10.176.20.158:35357/v2.0 user-list
>        keystone --token ahmedadmintoken --endpoint http://10.176.20.158:35357/v2.0 service-list
>        keystone --token ahmedadmintoken --endpoint http://10.176.20.158:35357/v2.0 role-list
>
> All of these should report back *without* errors, even if you haven't bootstrapped Keystone to include any services, tenants, users, or roles.
>
> You can also add "--debug" (as in keystone --debug --token ahmedadmintoken --endpoint http://10.176.20.158:35357/v2.0 user-list) to see the underlying HTTP protocol going back and forth and what's getting sent to Keystone.
>
> -joe
>
> On Oct 1, 2012, at 5:30 PM, Ahmed Al-Mehdi <ahmed@xxxxxxxxxx> wrote:
>> Actually, the curl command with the "X_Auth_Token" is my weak attempt to try to find a solution.  I am actually issuing the following command (per recommendation from the OpenStack document - "Install and Deploy Manual – Red Hat Ubuntu"):
>>
>> root@bodega:~# curl -d '{"auth": {"tenantName": "adminTenant", "passwordCredentials": {"username": "adminUser", "password": "secretword"}}}' -H "Content-type: application/json" -H "X_Auth_Token: ahmedadmintoken" http://10.176.20.158:35357/v2.0/tokens | python -mjson.tool
>>  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
>>                                 Dload  Upload   Total   Spent    Left  Speed
>> 100   231    0   116  100   115  12927  12816 --:--:-- --:--:-- --:--:-- 14500
>> {
>>    "error": {
>>        "code": 401,
>>        "message": "The request you have made requires authentication.",
>>        "title": "Not Authorized"
>>    }
>> }
>>
>> Regards,
>> Ahmed.
>>
>>
>> From: heckj <heckj@xxxxxxx>
>> Date: Monday, October 1, 2012 5:23 PM
>> To: Ahmed Al-Mehdi <ahmed@xxxxxxxxxx>
>> Cc: "openstack@xxxxxxxxxxxxxxxxxxx" <openstack@xxxxxxxxxxxxxxxxxxx>
>> Subject: Re: [Openstack] Enabling logging in keystone.
>>
>> Ahmed -
>>
>> The header that's supposed to have the token within it is labelled "X-Auth-Token', not "X_Auth_Token".  Unless you're really comfortable with the protocol, I'd recommend using the keystone CLI from the python-keystoneclient to do your verifying, using it's debugging (which is to show you the curl output that you did below).
>>
>> -joe
>>
>> On Oct 1, 2012, at 5:12 PM, Ahmed Al-Mehdi <ahmed@xxxxxxxxxx> wrote:
>>> Hello,
>>>
>>> I am trying to verify the installation of keystone.  When I try to run some "curl" commands, I get the following error message:
>>>
>>> root@bodega:~/ahmed/keystone-init# curl -d '{"auth": {"tenantName": "adminTenant", "passwordCredentials": {"username": "adminUser", "password": "secretword"}}}' -H "Content-type: application/json" -H "X_Auth_Token: ahmedadmintoken" http://10.176.20.158:35357/v2.0/tokens | python -mjson.tool
>>>  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
>>>                                 Dload  Upload   Total   Spent    Left  Speed
>>> 100   231    0   116  100   115  15205  15074 --:--:-- --:--:-- --:--:-- 16571
>>> {
>>>    "error": {
>>>        "code": 401,
>>>        "message": "The request you have made requires authentication.",
>>>        "title": "Not Authorized"
>>>    }
>>> }
>>>
>>>
>>> I don't see any message in the /var/log/keystone/logging.conf file.   I can pass "-debug" option to keystone to enable debugging, but I am not sure how to do that from curl.  Following is content of /etc/keystone/logging.conf file:
>>>
>>> root@bodega:~# cat /etc/keystone/logging.conf
>>> [loggers]
>>> keys=root
>>>
>>> [formatters]
>>> keys=normal,normal_with_name,debug
>>>
>>> [handlers]
>>> keys=production,file,devel
>>>
>>> [logger_root]
>>> level=WARNING
>>> handlers=file
>>>
>>> [handler_production]
>>> class=handlers.SysLogHandler
>>> level=ERROR
>>> formatter=normal_with_name
>>> args=(('localhost', handlers.SYSLOG_UDP_PORT), handlers.SysLogHandler.LOG_USER)
>>>
>>> [handler_file]
>>> class=FileHandler
>>> level=DEBUG
>>> formatter=normal_with_name
>>> args=('/var/log/keystone/keystone.log', 'a')
>>>
>>> [handler_devel]
>>> class=StreamHandler
>>> level=NOTSET
>>> formatter=debug
>>> args=(sys.stdout,)
>>>
>>> [formatter_normal]
>>> format=%(asctime)s %(levelname)s %(message)s
>>>
>>> [formatter_normal_with_name]
>>> format=(%(name)s): %(asctime)s %(levelname)s %(message)s
>>>
>>> [formatter_debug]
>>> format=(%(name)s): %(asctime)s %(levelname)s %(module)s %(funcName)s %(message)s
>>> root@bodega:~#
>>>
>>> Any help would be greatly appreciated.
>>>
>>> Regards,
>>> Ahmed.
>>>
>>>
>>>
>>> _______________________________________________
>>> Mailing list: https://launchpad.net/~openstack
>>> Post to     : openstack@xxxxxxxxxxxxxxxxxxx
>>> Unsubscribe : https://launchpad.net/~openstack
>>> More help   : https://help.launchpad.net/ListHelp
>>
> _______________________________________________
> Mailing list: https://launchpad.net/~openstack
> Post to     : openstack@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~openstack
> More help   : https://help.launchpad.net/ListHelp

Follow ups

References